Mechanics-based Analysis on Flagellated Robots

Yayun Du, Andrew Miller, Mohammad Khalid JawedarXiv 2021 · arXiv · OpenReview

Abstract

Locomotion in granular media (GM) presents unique challenges due to the complex fluid-structure interactions (FSI) between elastic actuators and granular environments. This study investigates the mechanics of soft robots that "swim" through GM using rotating elastic flagella. By integrating Discrete Differential Geometry (DDG) with Resistive Force Theory (RFT), researchers identified a "Flagellar Paradox": increasing the number of flagella does not always lead to higher propulsive speeds. The study reveals that the balance between motor torque, head rotation, and flagellar deformation determines locomotive efficiency.

Introduction

Locomotion in granular media, such as sand or soil, is difficult to model because these materials exhibit both solid-like and fluid-like properties. While microscopic organisms like bacteria successfully navigate fluids using whip-like flagella, translating this mechanism to macro-scale robots in GM is complex. The primary challenge is the non-linear coupling between the deformation of elastic flagella and the drag forces exerted by the surrounding grains. Understanding this interaction is crucial for designing efficient robots for search-and-rescue or exploration in challenging terrains.

Methods

The research utilized a multi-faceted approach to analyze flagellar locomotion, combining physical experiments with advanced numerical modeling:

  1. Physical Prototyping: Palm-sized robots were constructed with a rigid head containing a DC motor and batteries, and multiple soft, elastic rods serving as flagella.
  2. Numerical Simulation: A framework based on Discrete Differential Geometry (DDG) was employed. Flagella were modeled as Kirchhoff elastic rods (mass-spring systems) to capture geometrically non-linear deformations.
  3. Resistive Force Theory (RFT): To calculate drag forces from the granular medium, the team applied RFT, which decomposes forces into tangential and perpendicular components relative to the flagellum's local orientation.
Schematic of the flagellated robot model showing the forces and velocities acting on a segment of the elastic flagellum.

Validation was conducted by tracking robot motion in a transparent tube filled with hydrogel beads, allowing for direct comparison between experimental observations and simulation results.

Key Results and Insights

The study yielded several significant findings regarding the mechanics of these bio-inspired swimmers:

The Flagellar Paradox

The most counter-intuitive discovery was that adding more flagella can sometimes decrease speed. In specific designs (e.g., "Design 1" with a larger head and longer flagella), a robot with two flagella outperformed one with three. This occurs because the total motor torque is shared between the head and the flagella. If the external resistance is high, the head may rotate excessively (the "Torque Battle"), reducing the effective rotational speed of the flagella and thus the generated thrust.

Time-lapse comparison of robots with two (n=2) and three (n=3) flagella, demonstrating the variation in propulsive speed over time.

Modeling Accuracy

The DDG-based simulations accurately predicted these non-linear behaviors, whereas traditional linear Euler-Bernoulli beam theory failed at high motor speeds where flagellar deformations are large. The research confirmed that RFT, originally a micro-scale fluid dynamics theory, scales effectively to macro-scale granular environments.

Efficiency and Thresholds

A "watershed" motor speed was identified; below this threshold, the robot remains jammed. Above it, the efficiency is heavily dictated by the ratio of head rotation to flagella rotation. In some cases, head rotation consumed over 80% of the motor's output, suggesting that head geometry is as critical as flagellar design for optimization.

Conclusion

This work provides a robust mechanical framework for understanding and designing flagellated robots in granular media. By uncovering the trade-offs between flagella count, head size, and torque distribution, it paves the way for more efficient soft robotic systems. Future work will focus on addressing jamming transitions and adapting models for more complex, non-spherical granular materials like natural sand.

Summary updated

Abstract

We explore the locomotion of soft robots in granular medium (GM) resulting from the elastic deformation of slender rods. A low-cost, rapidly fabricable robot inspired by the physiological structure of bacteria is presented. It consists of a rigid head, with a motor and batteries embedded, and multiple elastic rods (our model for flagella) to investigate locomotion in GM. The elastic flagella are rotated at one end by the motor, and they deform due to the drag from GM, propelling the robot. The external drag is determined by the flagellar shape, while the latter changes due to the competition between external loading and elastic forces. In this coupled fluid-structure interaction problem, we observe that increasing the number of flagella can decrease or increase the propulsive speed of the robot, depending on the physical parameters of the system. This nonlinearity in the functional relation between propulsion and the parameters of this simple robot motivates us to fundamentally analyze its mechanics using theory, numerical simulation, and experiments. We present a simple Euler-Bernoulli beam theory-based analytical framework that is capable of qualitatively capturing both cases. Theoretical prediction quantitatively matches experiments when the flagellar deformation is small. To account for the geometrically nonlinear deformation often encountered in soft robots and microbes, we implement a simulation framework that incorporates discrete differential geometry-based simulations of elastic rods, a resistive force theory-based model for drag, and a modified Stokes law for the hydrodynamics of the robot head. Comparison with experimental data indicates that the simulations can quantitatively predict robotic motion. Overall, the theoretical and numerical tools presented in this paper can shed light on the design and control of this class of articulated robots in granular or fluid media.
BibTeX
@misc{du2021mechanics,
  author = {Yayun Du and Andrew Miller and Mohammad Khalid Jawed},
  title = {{Mechanics-based Analysis on Flagellated Robots}},
  year = {2021},
  eprint = {2112.13927},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2112.13927},
}
Figure