Abstract
The evaluation of the bathymetric capability of traditional airborne lidar system is mostly based on the formula of bathymetric capability by evaluating the diffuse attenuation coefficient ($K_d$). This method is derived from the assumption that the reflectance of sediment is fixed. In this study, however, the reflectance of sediment is not fixed. Therefore, this study improves the ability of bathymetric formula, and proposes a particle scattering classification algorithm to obtain the transmissivity value. The algorithm filters the scattering modes of particles by scattering discrimination factor ($q$), and obtains the transmissivity values by using the scattering intensity formulas. Experiments show that, when the transmissivity is in the range of 0–1 and the average values of $K_d$ (532 nm) are $0.1150 m^{-1}$, $0.0894 m^{-1}$ and $0.0903 m^{-1}$ in January, June and October respectively, accordingly, the bathymetric capabilities are 0–44 m, 0–61.5 m and 0–52.5 m, respectively. Compared with the original bathymetric method, these results show that the maximum bathymetric value measured by the improved bathymetric capability formula and scattering classification algorithm has decreased under the influence of the change of sediment reflectance, and the result is more consistent with the actual situation and more accurate.
Introduction
Airborne LiDAR bathymetry is a critical tool for mapping coastal zones and offshore seafloors. However, evaluating a system's maximum depth capability ($L_{max}$) has traditionally relied on formulas that assume the seafloor's reflectance is a fixed value. In reality, the seabed is complex; different sediments like sand, mud, and vegetation reflect light differently. Furthermore, water contains suspended particles that scatter the laser beam. Traditional models often overestimate depth performance because they fail to account for how varying sediment types and particle scattering modes impact the signal's transmissivity. This study addresses these gaps by treating sediment reflectance as a variable and introducing a novel scattering classification algorithm.
Methodology: Scattering Classification and Refined Bathymetry
The researchers introduced two major improvements to standard bathymetric evaluation. First, they modified the traditional $L_{max}$ equation to include transmissivity ($T$) as a primary variable, allowing the formula to reflect changes in both water turbidity (via the diffuse attenuation coefficient, $K_d$) and sediment reflectance.
Second, they developed a Scattering Classification Algorithm to calculate accurate transmissivity values. This algorithm classifies light interaction based on a scattering discrimination factor ($q$):
- Rayleigh Scattering ($q < 0.1$): Applied when particles are much smaller than the laser's wavelength (532nm).
- Michaelis (Mie) Scattering ($q \ge 0.1$): Applied when particle size is comparable to the wavelength.
By simulating millions of random particles to represent various seawater conditions, the team calculated the cumulative energy loss from both scattering types to determine the final transmissivity value.
Key Insights
A significant finding is the importance of Rayleigh scattering. While often ignored in underwater studies due to its lower intensity compared to Mie scattering, the authors argue that because fine particles (2–1000 nm) constitute 90–98% of total particle counts in coastal waters, their cumulative effect is substantial. Simulations also revealed that as the proportion of Michaelis scattering increases from 0% to 7%, transmissivity decreases almost linearly. By accounting for these complex scattering effects and variable seafloor reflectance, the new model provides a more conservative but realistic depth estimate.
Results and Discussion
The improved model was tested using environmental parameters from the Northern South China Sea, with $K_d$ values retrieved from MODIS sensors for different months.
The results demonstrated distinct seasonal depth capabilities:
- January: $K_d = 0.1150 m^{-1}$, Max Depth = 44m
- June: $K_d = 0.0894 m^{-1}$, Max Depth = 61.5m
- October: $K_d = 0.0903 m^{-1}$, Max Depth = 52.5m
In a direct comparison for June, the original method predicted a maximum depth of 71.5m, whereas the improved method predicted 62.5m. The lower value is more consistent with actual field observations, as it accounts for the energy "tax" imposed by sediment variation and fine-particle scattering.
Conclusion
By moving away from the assumption of constant seabed reflectance and incorporating a sophisticated scattering classification algorithm, this research provides a more accurate framework for predicting LiDAR bathymetric performance. While the method currently requires particle size distribution data, it sets the stage for more reliable coastal mapping and future integration with real-time water quality sensing.
Summary updated