A study on the aerosol extinction-to-backscatter ratio with combination of micro-pulse LIDAR and MODIS over Hong Kong

Qianshan He, Chengcai Li, Jietai Mao, Alexis K.h. Lau, P. R. LiAtmospheric 2006 · DOI

Abstract

The aerosol extinction-to-backscatter ratio is an important parameter for inverting LIDAR signals in the LIDAR equation. It is a complicated function of the aerosol microphysical characteristics. In this paper, a method to retrieve the column-averaged aerosol extinction-to-backscatter ratio by constraining the aerosol optical depths (AOD) from a Micro-pulse LIDAR (MPL) by the AOD measurements from the Moderate Resolution Imaging Spectroradiometer (MODIS) is presented. Both measurements were taken on cloud-free days between 1 May 2003 and 30 June 2004 over Hong Kong, a coastal city in south China. Simultaneous measurements of aerosol scattering coefficients with a forward scattering visibility sensor are compared with the LIDAR retrieval of aerosol extinction coefficients. The data are then analyzed to determine seasonal trends of the aerosol extinction-to-backscatter ratio. In addition, the relationships between the extinction-to-backscatter ratio and wind conditions as well as other aerosol microphysical parameters are presented. The mean aerosol extinction-to-backscatter ratio for the whole period was found to be 29.1±5.8 sr, with a minimum of 18 sr in July 2003 and a maximum of 44 sr in March 2004. The ratio is lower in summer because of the dominance of oceanic aerosols in association with the prevailing southwesterly monsoon. In contrast, relatively larger ratios are noted in spring and winter because of the increased impact of local and regional industrial pollutants associated with the northerly monsoon.

Introduction

LIDAR (Light Detection and Ranging) is a powerful tool for mapping the vertical structure of the atmosphere. However, converting raw LIDAR backscatter signals into meaningful "extinction coefficients"—a measure of how much light is blocked by pollution—requires knowing the Lidar Ratio (LR), also known as the extinction-to-backscatter ratio.

The LR is notoriously difficult to determine because it changes based on aerosol size, shape, and chemical composition. While advanced techniques like Raman LIDAR can measure this directly, they often struggle in the heavy, hazy pollution common in South China. This study addresses the need for a reliable way to estimate LR in high-aerosol environments by using independent satellite measurements from MODIS as a constraint for ground-based Micro-pulse LIDAR (MPL) data.

Methodology: The MODIS Constraint

The researchers employed a "Look-up Table" approach to determine the column-averaged LR. For every cloud-free day, they ran the LIDAR inversion equation multiple times, varying the assumed LR from 5 to 100. The "true" LR for that day was defined as the value that made the LIDAR-derived AOD match the AOD measured by the MODIS instrument on NASA’s Terra and Aqua satellites.

The methodology for retrieving the Lidar Ratio (LR) by matching LIDAR-derived AOD with MODIS measurements.

To ensure accuracy, they compared the near-surface LIDAR results with data from a collocated Belfort visibility sensor, which measures scattering coefficients at ground level. This validation showed a high correlation (R = 0.91) after correcting for wavelength differences and aerosol absorption.

Hong Kong acts as a natural laboratory for aerosol studies due to the seasonal monsoon cycle. The study found that the Lidar Ratio serves as an optical fingerprint for different aerosol types:

  • Summer (Southwesterly Monsoon): Clean, moist oceanic air dominates. The LR reached a minimum of approximately 18 sr, indicating large, spherical, non-absorbing maritime aerosols (sea salt).
  • Winter/Spring (Northerly Monsoon): Dry air carries industrial-laden pollutants from mainland China. The LR peaked at 44 sr, indicating smaller, highly absorbing industrial soot and regional pollutants.

The study also noted a significant anti-correlation between the LR and the Ångström exponent. As particles became smaller and more complex—typical of urban pollution—the LR increased. Regional transport from the Pearl River Delta was identified as a major driver of high LR values during northwesterly wind conditions.

Vertical Distribution of Aerosols

A key advantage of the LIDAR method is its ability to resolve the vertical structure of pollution. The retrieved extinction profiles revealed that most aerosols are confined within the lowest 1.5 km of the atmosphere, particularly during heavy pollution events.

Vertical profiles of aerosol extinction coefficients retrieved using the combined LIDAR-MODIS method.

Conclusion and Future Work

The mean aerosol extinction-to-backscatter ratio for Hong Kong was determined to be 29.1 ± 5.8 sr. While the method is limited to cloud-free days and assumes vertical uniformity of the LR, it provides a robust framework for ground-based monitoring in coastal urban environments. These localized LR values are essential for improving Radiative Transfer Models (RTM) to better understand the climate impact of aerosols over Southern China.

Summary updated

Abstract

The aerosol extinction-to-backscatter ratio is an important parameter for inverting LIDAR signals in the LIDAR equation. It is a complicated function of the aerosol microphysical characteristics. In this paper, a method to retrieve the column-averaged aerosol extinction-to-backscatter ratio by constraining the aerosol optical depths (AOD) from a Micro-pulse LIDAR (MPL) by the AOD measurements from the Moderate Resolution Imaging Spectroradiometer (MODIS) is presented. Both measurements were taken on cloud free days between 1 May 2003 and 30 June 2004 over Hong Kong, a coastal city in south China. Simultaneous measurements of aerosol scattering coefficients with a forward scattering visibility sensor are compared with the LIDAR retrieval of aerosol extinction coefficients. The data are then analyzed to determine seasonal trends of the aetrosol extinction-to-backscatter ratio. In addition, the relationships between the extinction-to-backscatter ratio and wind conditions as well as other aerosol microphysical parameters are presented. The mean aerosol extinction-to-backscatter ratio for the whole period was found to be 29.1±5.8 sr, with a minimum of 18 sr in July 2003 and a maximum of 44 sr in March 2004. The ratio is lower in summer because of the dominance of oceanic aerosols in association with the prevailing southwesterly monsoon. In contrast, relatively larger ratios are noted in spring and winter because of the increased impact of local and regional industrial pollutants associated with the northerly monsoon. The extended LIDAR measurements over Hong Kong provide not only a more accurate retrieval of aerosol extinction coefficient profiles, but also significant substantial information for air pollution and climate studies in the region.
BibTeX
@inproceedings{he2006study,
  author = {Qianshan He and Chengcai Li and Jietai Mao and Alexis K.H. Lau and P. R. Li},
  title = {{A study on the aerosol extinction-to-backscatter ratio with combination of micro-pulse LIDAR and MODIS over Hong Kong}},
  booktitle = {Atmospheric},
  year = {2006},
  doi = {10.5194/acp-6-3243-2006},
}
Figure