Shallow Water Bathymetry Mapping from UAV Imagery based on Machine Learning

Panagiotis Agrafiotis, Dimitrios Skarlatos, Andreas Georgopoulos, Konstantinos KarantzalosarXiv 2019 · DOI · OpenReview

Abstract

Accurate bathymetric information is essential for coastal engineering, sedimentary studies, and archaeological mapping. While bathymetric LiDAR provides high-quality data, its high cost limits its accessibility for frequent or small-scale surveys. This paper presents a low-cost alternative using Unmanned Aerial Vehicle (UAV) imagery processed with Structure from Motion (SfM) and Multi-View Stereo (MVS) techniques. To overcome the significant depth underestimation caused by water refraction, a machine learning approach using Support Vector Regression (SVR) was developed. By training on known depth observations from LiDAR surveys, the SVR model effectively corrects drone-derived point clouds, achieving vertical accuracies that meet international hydrographic standards.

The Challenge: Water Refraction

Coastal mapping using standard cameras on drones faces a fundamental physical hurdle: refraction. According to Snell’s Law, light rays bend as they transition from water to air. In photogrammetric processing, this bending causes a systematic geometric distortion where the seabed appears shallower than its actual position. This "apparent depth" ($Z_0$) must be corrected to obtain the "real depth" ($Z$).

The geometry of water refraction in multi-view drone imagery, illustrating the difference between apparent and real depth.

Traditional correction methods often rely on complex, hand-coded optical algorithms that are difficult to integrate into modern multi-view geometry workflows. This study proposes a data-driven shortcut: using machine learning to learn the systematic relationship between the erroneous apparent depth and the ground truth.

Methodology

The proposed workflow begins with generating an initial 3D point cloud from UAV imagery using standard photogrammetric software (Agisoft Photoscan). This raw point cloud contains the distorted apparent depths.

To correct these errors, the researchers employed Support Vector Regression (SVR) with a linear kernel. The model was trained to map the relationship between the apparent depth ($Z_0$) and the actual depth ($Z$) provided by a Leica HawkEye III bathymetric LiDAR system. SVR was chosen over simple linear regression due to its robustness; its "hinge loss" function allows it to ignore minor noise and outliers—such as sun glint or moving vegetation—that typically plague underwater imagery.

Key Insights and Results

Experimental results from two test sites in Cyprus (Amathouda and Agia Napa) revealed that the relationship between apparent and real depth is remarkably linear. This linearity allows for highly efficient correction models that do not require complex deep-learning architectures.

Scatter plot comparing apparent depth (Zo) to LiDAR depth (Z), showing the linear relationship and the performance of different regression models.

The SVR model demonstrated impressive performance:

  • Accuracy: In the Agia Napa site (depths up to 14.8m), the mean depth error was reduced from 2.23m in the uncorrected data to just -0.10m after SVR correction.
  • Standards: The corrected data achieved a vertical accuracy of approximately ±25cm, meeting the International Hydrographic Organization (IHO) standards for shallow water surveys.
  • Generalizability: A model trained on the shallower Amathouda site (max depth ~5.5m) successfully corrected data for the deeper Agia Napa site, suggesting the learned refraction physics are transferable across different locations.

Conclusion and Future Work

This research demonstrates that machine learning can bridge the gap between low-cost drone imagery and expensive LiDAR systems for shallow water bathymetry. By treating refraction as a systematic error to be learned rather than a purely optical problem to be modeled, the SVR approach provides a robust and accessible solution for coastal researchers.

Future work will focus on testing the model in more turbid (cloudy) waters and integrating additional variables, such as the angle of incidence and water quality parameters, to further refine accuracy in diverse environmental conditions.

Summary updated

Abstract

The determination of accurate bathymetric information is a key element for near offshore activities, hydrological studies such as coastal engineering applications, sedimentary processes, hydrographic surveying as well as archaeological mapping and biological research. UAV imagery processed with Structure from Motion (SfM) and Multi View Stereo (MVS) techniques can provide a low-cost alternative to established shallow seabed mapping techniques offering as well the important visual information. Nevertheless, water refraction poses significant challenges on depth determination. Till now, this problem has been addressed through customized image-based refraction correction algorithms or by modifying the collinearity equation. In this paper, in order to overcome the water refraction errors, we employ machine learning tools that are able to learn the systematic underestimation of the estimated depths. In the proposed approach, based on known depth observations from bathymetric LiDAR surveys, an SVR model was developed able to estimate more accurately the real depths of point clouds derived from SfM-MVS procedures. Experimental results over two test sites along with the performed quantitative validation indicated the high potential of the developed approach.
BibTeX
@misc{agrafiotis2019shallow,
  author = {Panagiotis Agrafiotis and Dimitrios Skarlatos and Andreas Georgopoulos and Konstantinos Karantzalos},
  title = {{Shallow Water Bathymetry Mapping from UAV Imagery based on Machine Learning}},
  year = {2019},
  eprint = {1902.10733},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1902.10733},
}
Figure