Abstract
Aiming at the problem of polygon effect vibration caused by unreasonable matching between track plate and chain link pitch of crawler robot in coal mine, a method is proposed to improve polygon effect by adjusting characteristic parameters of guide arc branch. First, the theory of polygon effect and vibration of chain link is analysed. Second, the virtual simulation experiments and discussion of the crawler robot with different guide arc branch parameters are carried out by RecurDyn. Finally, the external test is carried out. The results show that with the increase of $D_c$ and $L_c$, the contact forces between the observed track plate and the idler, and between the mountain damping pad and the road significantly decrease, the vibration displacement of vehicle body correspondingly decreases, and the vibration impact of the crawler robot is weakened, which provides theoretical reference for improving ride comfort of the crawler robot in coal mine.
The Challenge of the Polygon Effect
Crawler robots are essential for hazardous environments like coal mines, where they handle excavation, inspection, and rescue. However, they suffer from a mechanical quirk known as the polygon effect.
Because a crawler track is made of discrete, rigid links rather than a perfect circle, it behaves like a polygon rolling over a round sprocket or idler. This leads to non-uniform motion, periodic "jerks," and intense vibrations. In the confined and harsh environments of a mine, these vibrations don't just make for a bumpy ride; they accelerate mechanical wear, reduce operational stability, and can lead to "chain off" events where the track jumps its guides. The authors aim to find the geometric "sweet spot" to minimize these destructive forces.
Methodology and Modeling
The research team employed a three-pronged approach involving theoretical modeling, virtual simulation, and physical testing. To facilitate this, they developed a high-fidelity 3D model of the crawler robot to analyze the interaction between the track and the drive components.
- Theoretical Modeling: They derived kinematic equations to show how idler diameter ($D_c$) and the approach angle ($\beta$) influence the angular velocity and inertial forces of the track.
- Virtual Simulation: Using RecurDyn (a multi-body dynamics software), they simulated various scenarios by varying the idler diameter ($130$ mm to $180$ mm) and the distance between the idler and the first roadwheel ($L_c$).
- Physical Testing: To validate the simulations, they conducted "external tests" on hard pavement using a physical robot prototype equipped with a DH5902N data acquisition system, five acceleration sensors, and a dynamic torque sensor.
Optimizing the Guide Arc
The core of the study focuses on the "guide arc branch" — the section of the track transitioning from the ground to the idler. The researchers identified two primary geometric levers for reducing vibration: the idler diameter ($D_c$) and the horizontal distance between the idler and the nearest roadwheel ($L_c$).
- The Geometry of Smoothness: The relationship between idler size and angular velocity is critical. Increasing the idler diameter ($D_c$) directly decreases the idler's angular velocity fluctuations, which in turn weakens the polygon effect.
- The Spacing Factor: Increasing the distance between the idler and the first roadwheel ($L_c$) reduces the "approach angle" ($\beta$) of the track. A shallower angle means the track links transition more smoothly from the ground to the idler, reducing the "slap" or impact force.
Key Results and Discussion
- Force Reduction: In simulations, increasing the idler diameter from $130$ mm to $160$ mm slashed the maximum contact force between the track plate and idler from $1850$ N down to $534$ N—a nearly $70\%$ reduction.
- Vibration Damping: Increasing the idler-to-roadwheel distance ($L_c$) from $160$ mm to $200$ mm reduced the peak vertical vibration displacement of the vehicle body from $16.4$ mm to $15.1$ mm.
- Optimal Configuration: The authors concluded that for their robot, a configuration of $D_c = 160$ mm and $L_c = 160$ mm provided the best balance of stability and mechanical efficiency. Benefits began to plateau beyond these dimensions.
- Simulation Accuracy: The real-world tests closely mirrored the simulations, with test acceleration curves fluctuating within $\pm 2.0$ g, compared to the $\pm 2.3$ g predicted by the model.
Conclusion and Future Directions
While the study successfully demonstrates how geometric optimization can mitigate the polygon effect, the authors acknowledge areas for further exploration. The current simulation treated many components as rigid bodies, whereas real-world track links and damping pads have elastic properties. Furthermore, while tests were performed on hard pavement, future work is needed to validate these optimizations in the actual mud and unstructured debris of a coal mine. Finally, optimizing the link-to-plate pitch ratio alongside guide arc parameters remains a promising avenue for future research.
Summary updated