Mechanical Design of Step-Climbing Vehicle with Passive Linkages

Daisuke Chugo, Kuniaki Kawabata, Hayato Kaetsu, Hajime Asama, Taketoshi MishimOpenalex Unknown 2007 · DOI · OpenAlex

Abstract: In this paper, we proposed the mechanical design for passive linkages. We discuss the moment force which is applied on the vehicle body when the vehicle contacts the step and we derive the moment force using the position of free joint point. From the derivation, we design new passive linkage mechanism and utilize it to our prototype. We verified the effectiveness of our proposed design on passive linkages by computer simulations and experiments. Utilizing our proposed mechanical design on the prototype, the moment force becomes positive, all wheels are grounded and step-climbing ability increases. From these results, our proposed mechanical design for passive linkages improves the mobile performance.

Introduction

Mobile robots operating in structured environments like hospitals or industrial plants frequently encounter vertical obstacles such as steps or thresholds. While omni-directional wheels offer superior maneuverability in tight spaces, they often lack the climbing capability required for these common obstacles.

Traditional passive suspension systems, such as the rocker-bogie mechanism used in planetary rovers, allow wheels to adapt to uneven terrain. However, these systems can suffer from a "floating wheel" phenomenon during high-step climbs, where specific wheels lose ground contact and traction, causing the vehicle to stall. This paper proposes a mechanical design methodology for passive linkages that optimizes the suspension geometry to ensure all wheels remain grounded, thereby enhancing step-climbing performance without the need for active control or additional sensors.

Mechanical Design and Modeling

The proposed solution centers on a 22kg, 7-wheeled holonomic vehicle. The architecture utilizes passive linkages to distribute weight and maintain traction through purely mechanical means.

Vehicle Architecture

The vehicle's layout is designed for omni-directional movement, with each wheel featuring twelve cylindrical free rollers. The suspension consists of rocker and bogie components connected at specific "free link points" that allow the frame to flex over obstacles.

Top view of the 7-wheeled vehicle prototype showing the arrangement of wheels and free link points.

Mathematical Modeling and Pivot Optimization

The core of the design methodology is a rigorous force-balance analysis. The researchers derived equations for the moment forces ($M_l$ and $M_b$) acting on the rocker and bogie components as the vehicle encounters a step. These moments are critical because they determine whether the wheels are pressed into the ground (positive moment) or lifted away (negative moment).

The analysis identified that these moments are functions of the free joint point $(x_0, y_0)$—the pivot where the suspension components meet. By plotting the stability criteria for both forward and backward movement, the researchers identified an optimal pivot position ($x_0 = 0, y_0 = 0$ in their coordinate system) that maximizes downward force on the wheels during a climb, ensuring traction is maintained even at steep angles.

Free body diagram used for the force-balance analysis to determine the optimal pivot point coordinates.

Experimental Results

The effectiveness of the optimized passive linkage design was verified through both computer simulations and physical experiments. The prototype was tested against a standard rocker-bogie configuration to establish a baseline for performance.

  • Climbing Height: The optimized prototype successfully climbed a vertical step of 128mm, more than doubling the 60mm limit of the standard design. In simulations, the model reached heights of up to 150mm.
  • Ground Contact Stability: During a 60mm step climb, the standard suspension experienced a wheel "float" (loss of contact) for 2.8 seconds. The proposed design reduced this duration to just 0.6 seconds, significantly improving traction and reliability.
  • Passive Intelligence: The system demonstrated that high-performance obstacle navigation can be achieved through "baked-in" mechanical intelligence, requiring no sensors or microprocessors to adjust the suspension in real-time.

Conclusion

This research demonstrates that careful analytical placement of passive suspension pivots can significantly improve the mobile performance of wheeled robots. By ensuring positive moment forces during obstacle contact, the design keeps all wheels grounded and maximizes available traction. While the current design assumes a vertical step and relies on specific friction coefficients, it provides a robust framework for designing high-mobility vehicles. Future work will explore performance on irregular rubble and the impact of lower pivot points on body clearance during obstacle traversal.

Summary updated

Abstract

In this paper, we proposed the mechanical design for passive linkages. We discuss the moment force which is applied on the vehicle body when the vehicle contacts the step and we derive the moment force using the position of free joint point. From the derivation, we design new passive linkage mechanism and utilize it to our prototype. We verified the effectiveness of our proposed design on passive linkages by computer simulations and experiments. Utilizing our proposed mechanical design on the prototype, the moment force becomes positive, all wheels are grounded and step-climbing ability increases. From these results, our proposed mechanical design for passive linkages improves the mobile performance.
BibTeX
@inproceedings{chugo2007mechanical,
  author = {Daisuke Chugo and Kuniaki Kawabata and Hayato Kaetsu and Hajime Asama and Taketoshi Mishim},
  title = {{Mechanical Design of Step-Climbing Vehicle with Passive Linkages}},
  booktitle = {Openalex Unknown},
  year = {2007},
  doi = {10.5772/5514},
}
Figure