Imaging Properties of Large Field-of-View Quadratic Metalenses and Their Applications to Fingerprint Detection

Emmanuel Lassalle, Tobias W. W. Maß, Damien Eschimèse, Anton V. Baranikov, Egor Khaidarov, Shiqiang Li, Ramón Paniagua‐Domínguez, Arseniy I. Kuznetsov

TL;DR

Researchers have developed an ultra-compact imaging system using a "quadratic metalens" that achieves an extremely wide field-of-view (FOV) in a package just 2.7 mm thick. By leveraging a unique quadratic phase profile, they demonstrated the most compact fingerprint detection system to date, capable of imaging a 5 mm object from only 2.5 mm away.

What Problem Does This Paper Address?

In the world of optics, there is a constant battle between performance and size. Traditional wide-angle lenses (like fisheye lenses) are bulky, requiring multiple curved glass elements to correct for off-axis aberrations. Metalenses—flat surfaces covered in sub-wavelength nanostructures—offer a path toward miniaturization, but they usually struggle with "off-axis" light. As the angle of incidence increases, standard metalenses suffer from severe aberrations that blur the image.

While "quadratic" phase profiles were recently proposed to allow for a theoretical 180° FOV with a single flat element, their actual imaging performance hadn't been rigorously tested. This paper bridges that gap, analyzing the fundamental trade-offs between field-of-view, resolution, and the intrinsic "barrel distortion" that comes with this specific lens geometry.

Methods

The team combined theoretical modeling, numerical simulations, and experimental fabrication:

  • Phase Design: Unlike standard lenses that use a hyperbolic phase profile to achieve a perfect point focus, the authors used a quadratic phase profile. This profile has a unique property: light hitting the lens at an angle simply shifts the "effective working area" of the lens laterally rather than introducing massive new aberrations.
  • Simulations: They used Fourier optics (specifically the plane-wave spectrum method) to model light propagation and Finite-Difference Time-Domain (FDTD) simulations to design the individual "meta-atoms"—amorphous silicon (aSi) nanopillars on a glass substrate.
  • Fabrication: The metalenses were fabricated using electron-beam lithography and deep reactive ion etching (a pseudo-Bosch process) to create high-aspect-ratio silicon pillars.
  • Testing: They characterized the lens using Point Spread Function (PSF) measurements and Modulation Transfer Function (MTF) analysis. Finally, they built a prototype imaging system to capture images of a ruler and a printed fingerprint.

Datasets

Not discussed in the paper. As this is a physical optics and hardware design paper, it does not utilize large-scale training datasets common in machine learning. The "data" consists of experimental measurements and a printed 5 mm x 5 mm fingerprint used as a test object.

Key Insights and Ideas

  • The Lateral Shift Property: The most striking feature of a quadratic metalens is that an incident angle $\theta$ is converted into a simple lateral shift of the phase profile. This allows the lens to maintain a consistent focus quality across an incredibly wide range of angles.
  • Non-Planar Imaging: The authors discovered that a quadratic metalens does not naturally image a flat object onto a flat plane. Instead, it conjugates a planar object onto an ellipsoidal surface. For very distant objects, this flattens out, but for close-up imaging (like fingerprints), the sensor placement is critical.
  • The Resolution/FOV Trade-off: The paper identifies a fundamental limit: because the lens compresses a huge FOV into a small image area (barrel distortion), the "relative resolution" required at the edges of the image is much higher than at the center. This means your sensor's pixel size or the lens's intrinsic resolution eventually limits how wide your FOV can actually be in practice.
  • Intrinsic Aberrations: Quadratic lenses are inherently non-stigmatic; they have built-in spherical aberrations that result in an elongated focal spot. This leads to a lower focusing efficiency (~8-14%) compared to ideal lenses but provides a larger depth-of-focus.

Key Results

  • Extreme Compactness: The team demonstrated a fingerprint sensor with a total device thickness of only ~2.7 mm.
  • Wide FOV: They experimentally demonstrated imaging with a FOV exceeding 120° for a ruler and successfully captured a full 5 mm x 5 mm fingerprint at a distance of just 2.5 mm.
  • Resolution: The system resolved fingerprint features on the order of 100 µm, which is sufficient for biometric identification.
  • Consistency: The Point Spread Function (PSF) remained stable up to an angle of incidence of 80°, confirming the lens's robustness for wide-angle applications.

Limitations and Future Work

  • Efficiency: The focusing efficiency is relatively low (8% experimentally). This is an intrinsic property of the quadratic profile's elongated focal spot. Future work could look into hybrid designs to boost efficiency without sacrificing FOV.
  • Post-Processing: The images suffer from significant barrel distortion. While the authors showed this can be corrected via software, it requires a high-resolution sensor to maintain detail at the edges after the image is "unwarped."
  • Contrast: The inherent spherical aberrations limit image contrast. The authors suggest that adding an aperture stop (pinhole) at the front focal plane could significantly improve the Modulation Transfer Function (MTF) and overall image quality, albeit at the cost of some light collection.

Summary updated

Abstract

Dielectric metasurfaces, extremely thin nanostructured dielectric surfaces, hold promise to replace conventional refractive optics, such as lenses, due to their high performance and compactness. However, designing large field-of-view (FOV) metalenses, which are of particular importance when imaging relatively big objects at short distances, remains one of the most critical challenges. Recently, metalenses implementing a quadratic phase profile have been put forward to solve this problem with a single element, but despite their theoretical ability to provide 180° FOV, imaging over very large FOV has not been demonstrated yet. In this work, we provide an in-depth analysis of the imaging properties of quadratic metalenses and, in particular, show that due to their intrinsic barrel distortion or fish-eye effect, there is a fundamental trade-off between the FOV achievable in a given imaging configuration and the optical resolution of the metalens and/or the detector resolution. To illustrate how to harness the full potential of quadratic metalenses, we apply these considerations to the fingerprint detection problem and demonstrate experimentally the full imaging of a 5 mm fingerprint with features of the order of 100 μm, with a metalens ten times smaller in size and located at a distance of only 2.5 mm away from the object. This constitutes the most compact imaging system reported so far for fingerprint detection.
BibTeX
@inproceedings{lassalle2021imaging,
  author = {Emmanuel Lassalle and Tobias W. W. Maß and Damien Eschimèse and Anton V. Baranikov and Egor Khaidarov and Shiqiang Li and Ramón Paniagua‐Domínguez and Arseniy I. Kuznetsov},
  title = {{Imaging Properties of Large Field-of-View Quadratic Metalenses and Their Applications to Fingerprint Detection}},
  booktitle = {ACS},
  year = {2021},
  doi = {10.1021/acsphotonics.1c00237},
}

Loading related content...

Figure