Hybrid Reconfigurable Intelligent Metasurfaces: Enabling Simultaneous Tunable Reflections and Sensing for 6G Wireless Communications

George C. Alexandropoulos, Nir Shlezinger, Idban Alamzadeh, Mohammadreza F. Imani, Haiyang Zhang, Yonina C. Eldar

TL;DR

This paper introduces Hybrid Reconfigurable Intelligent Metasurfaces (HRISs), a new hardware paradigm for 6G that allows metasurfaces to simultaneously reflect and sense incoming radio signals. By integrating sensing capabilities directly into the surface, HRISs enable self-configuring "smart radio environments" and significantly simplify the complex task of channel estimation in wireless networks.

What Problem Does This Paper Address?

As we move toward 6G, researchers are looking at Reconfigurable Intelligent Surfaces (RISs) to create "smart radio environments." A standard RIS is a thin sheet of passive elements that can be electronically tuned to reflect signals in specific directions, helping to bypass obstacles and improve coverage.

However, standard RISs are "blind." Because they lack sensing hardware, they cannot "see" the signals they are reflecting. This creates two major headaches:

  1. Orchestration Overhead: The RIS doesn't know where users are, so it must be externally controlled by a Base Station (BS) via a dedicated link, adding complexity to network management.
  2. Channel Estimation: To work effectively, the system needs to know the exact characteristics of the wireless channel between the user and the RIS, and between the RIS and the BS. Estimating these "cascaded" channels is mathematically difficult and requires a massive number of pilot signals, which eats up valuable bandwidth.

Methods

The authors propose a hardware architecture for Hybrid RISs (HRISs) where each unit element (meta-atom) can split the incident energy. A portion is reflected with a tunable phase, while the remainder is coupled into a sensing circuit.

  • Hardware Design: The proposed meta-atom uses a multi-layer structure. A varactor diode controls the reflection phase, while a metallic "via" captures a fraction of the incident signal and directs it into a Substrate Integrated Waveguide (SIW). These waveguides are connected to a small number of reception Radio Frequency (RF) chains for digital processing.
  • Dual Operation Model: The authors developed a mathematical model where a "coupling coefficient" ($\rho$) determines the power split between reflection and sensing. This allows the surface to be tuned for different tasks—for example, sensing more during an initial discovery phase and reflecting more during data transmission.
  • Validation: The concept was validated using full-wave electromagnetic (EM) simulations in Ansys HFSS to prove the meta-atom's performance at 19 GHz, followed by system-level numerical simulations to evaluate sensing and channel estimation accuracy.
Fig. 1: Illustration of the HRIS and the constitutive hybrid meta-atom design proposed in [11]. The layers of the meta-atom on the top right are artificially separated for visualization purposes. The cross section of the metasurface and the coupled-wave signal path are depicted on the bottom-right drawing.

Datasets

Not discussed in the paper. The study relies on physics-based EM simulations and synthetic channel models common in wireless communications research.

Key Insights and Ideas

  • Sensing Autonomy: Because HRISs can sense signals locally, they can estimate the Angle-of-Arrival (AoA) of incoming waves. This allows the surface to self-configure its reflection pattern without needing constant instructions from the Base Station.
  • The Sensing-Reflection Trade-off: There is a fundamental balance to strike. Sensing more signal improves channel estimation accuracy but reduces the power of the reflected signal (lowering the SNR at the receiver). The authors show that even sensing a small fraction (e.g., 20%) is often enough for high-quality estimation.
  • Pilot Reduction: By sensing the user-to-RIS channel directly at the metasurface, the system can disentangle the complex cascaded channel. This drastically reduces the number of pilot symbols needed compared to standard "blind" RIS systems.
  • Hardware Efficiency: Unlike active relays, HRISs don't need power-hungry transmission circuitry. They only need a few reception RF chains (e.g., 8 chains for a 64-element surface) to achieve significant gains.

Key Results

  • AoA Estimation: Simulations showed that an HRIS can accurately estimate the elevation angle of an incoming signal even when sensing only 20% of the energy. Larger surfaces (more meta-atoms) further improve this accuracy.
  • Channel Estimation Efficiency: In a multi-user MIMO setup with 8 users and a 64-element HRIS, individual channels could be recovered using only 64 pilot symbols. In contrast, standard RIS methods would require over 90 pilots just to estimate the combined cascaded channel.
  • Performance Gains: As shown in Figure 6, once the number of RF chains reaches a certain threshold (around 5 in their setup), the HRIS significantly outperforms standard reflective RISs in channel estimation accuracy, especially when the coupling parameters are optimized.
Fig. 6: Normalized Mean-Squared Error (MSE) of channel estimation vs. the number of RF chains. HRIS (blue/red lines) outperforms standard RIS (dashed lines) as sensing hardware increases.

Limitations and Future Work

  • Hardware Complexity: Adding RF chains and digital processing increases the cost and power consumption of the metasurface compared to purely passive designs.
  • Physics-Driven Modeling: The current study uses a simplified model for the meta-atoms. Real-world implementations will face complex inter-element coupling and non-linear responses that need more detailed characterization.
  • Control Protocols: Future research is needed to develop low-latency protocols for sharing sensed information between the HRIS and the Base Station, especially in fast-moving mobile environments.
  • Frequency Scaling: While this proof-of-concept focused on 19 GHz, designing efficient hybrid structures for higher frequencies (mmWave and THz) remains a significant engineering challenge.

Summary updated

Abstract

The latest discussions on the upcoming sixth Generation (6G) of wireless communications are envisioning future networks as a unified communications, sensing, and computing platform. The recently conceived concept of the smart radio environment, enabled by Reconfigurable Intelligent Surfaces (RISs), contributes towards this vision offering programmable propagation of information-bearing signals. Typical RIS implementations include metasurfaces with almost passive unit elements capable of reflecting their incident waves in controllable ways. However, this solely reflective operation induces significant challenges for the RIS optimization from the wireless network orchestrator. For example, RISs lack information to locally tune their reflection pattern, which can only be acquired by other network entities, and then shared with the RIS controller. Furthermore, channel estimation, which is essential for coherent RIS-empowered communications, is challenging with the available RIS designs. This article reviews the emerging concept of Hybrid reflecting and sensing RISs (HRISs), which enables metasurfaces to reflect the impinging signal in a controllable manner, while simultaneously sensing a portion of it. The sensing capability of HRISs facilitates various network management functionalities, including channel parameter estimation and localization, while giving rise to potentially computationally autonomous and self-configuring metasurfaces. We discuss a hardware design for HRISs and detail a full-wave electromagnetic proof of concept. The distinctive properties of HRISs, in comparison to their solely reflective counterparts, are highlighted and a simulation study evaluating their capability for performing full and parametric channel estimation is presented. Future research challenges and opportunities arising from the HRIS concept are also included.
BibTeX
@article{alexandropoulos2024hybrid,
  author = {George C. Alexandropoulos and Nir Shlezinger and Idban Alamzadeh and Mohammadreza F. Imani and Haiyang Zhang and Yonina C. Eldar},
  title = {{Hybrid Reconfigurable Intelligent Metasurfaces: Enabling Simultaneous Tunable Reflections and Sensing for 6G Wireless Communications}},
  journal = {IEEE Veh. Technol. mag},
  year = {2024},
  doi = {10.1109/mvt.2023.3332580},
}
Figure