Abstract
Internet of Things (IoT) devices are typically powered by small-sized batteries with limited energy storage capacity, requiring regular replacement or recharging. To reduce costs and maintain connectivity in IoT networks, energy harvesting technologies are regarded as a promising solution. Notably, due to its robust analytical and generative capabilities, generative artificial intelligence (GenAI) has demonstrated significant potential in optimizing energy harvesting networks. Therefore, we discuss key applications of GenAI in improving energy harvesting wireless networks for IoT in this article. Specifically, we first review the key technologies of GenAI and the architecture of energy harvesting wireless networks. Then, we show how GenAI can address different problems to improve the performance of the energy harvesting wireless networks. Subsequently, we present a case study of unmanned aerial vehicle (UAV)-enabled data collection and energy transfer. The case study shows distinctively the necessity of energy harvesting technology and verify the effectiveness of GenAI-based methods. Finally, we discuss some important open directions.
Introduction
The rapid expansion of the Internet of Things (IoT) is fundamentally constrained by power availability. Most IoT devices rely on small batteries with limited lifespans, making frequent maintenance costly or impossible in remote locations. Energy Harvesting (EH)—the process of capturing energy from ambient sources like solar, wind, or Radio Frequency (RF) signals—presents a sustainable path forward. However, managing EH-IoT networks is complex due to the stochastic nature of energy sources and dynamic network conditions. Traditional optimization methods often require precise mathematical models that are unavailable in real-world scenarios. This paper explores how Generative AI (GenAI) can serve as an intelligent optimization engine to overcome these challenges.
Generative AI in EH-IoT Networks
GenAI models, including Generative Adversarial Networks (GANs), Variational Autoencoders (VAEs), and Diffusion models, offer unique capabilities for network optimization:
- Data Augmentation: GANs can generate synthetic channel state information (CSI) to train models when real-world data is scarce.
- Latent Representation: VAEs can compress complex network states into lower-dimensional representations, facilitating efficient energy forecasting.
- Policy Optimization: Diffusion models can be integrated into Deep Reinforcement Learning (DRL) to refine decision-making processes.
Case Study: UAV-Enabled Data Collection and Energy Transfer
A critical application involves using Unmanned Aerial Vehicles (UAVs) to collect data and transfer energy to ground-based IoT devices. To optimize this, the authors propose a Diffusion model-based Twin Delayed Deep Deterministic policy gradient (DTD3) algorithm. In this framework, the diffusion model acts as a "denoiser" within the actor network, progressively refining random noise into optimal actions for UAV trajectory and device scheduling.
Key Results and Performance
The application of GenAI yields significant performance gains across various EH-IoT tasks:
- Channel Estimation: A Conditional GAN (CGAN) approach improved estimation accuracy by 82% over traditional methods in low signal-to-noise ratio (SNR) environments.
- Energy Forecasting: VAE-based solar power prediction models achieved a 37.93% improvement in computation time while reducing parameters by over 97%.
- Data Freshness: In the UAV case study, the DTD3 algorithm significantly outperformed standard DRL benchmarks like TD3 in minimizing the Average Age of Information (AoI), ensuring more timely data collection.
Future Directions
While promising, the integration of GenAI into EH-IoT faces several hurdles. Future research must address the computational overhead of complex models like Transformers on resource-constrained devices. Additionally, managing interference in dense networks—potentially converting harmful interference into harvestable energy—and developing high-precision distributed beamforming remain open challenges. Balancing the energy consumed by AI computations against the energy saved through optimization is a critical trade-off for truly autonomous "green" networks.
Summary updated