Generative AI for Energy Harvesting Internet of Things Network: Fundamental, Applications, and Opportunities

Wenwen Xie, Geng Sun, Jiahui Li, Jiacheng Wang, Hongyang Du, Dusit Niyato, Octavia A. Dobre

TL;DR

This paper explores the integration of Generative AI (GenAI) into Energy Harvesting Internet of Things (EH-IoT) networks to overcome the limitations of traditional battery-powered devices. By leveraging models like GANs, VAEs, and Diffusion models, the authors demonstrate how GenAI can optimize resource allocation, antenna design, and energy forecasting, ultimately leading to more sustainable and autonomous IoT ecosystems.

What Problem Does This Paper Address?

The Internet of Things (IoT) is expanding rapidly, but its growth is tethered by a fundamental bottleneck: power. Most IoT devices rely on small batteries that require frequent replacement or recharging, which is costly and often impractical in remote environments.

While Energy Harvesting (EH)—drawing power from solar, wind, or Radio Frequency (RF) signals—offers a solution, managing these networks is incredibly complex. Traditional optimization techniques (like convex optimization) struggle with the "messiness" of the real world: they aren't adaptable to dynamic environments and require near-perfect mathematical models of the network, which are rarely available. This paper proposes GenAI as the "brain" to manage these "green" networks.

Methods

The authors categorize GenAI’s utility into three core strengths: Data Augmentation (creating synthetic training data), Latent Representation Learning (finding hidden patterns in complex signals), and Knowledge Transfer (applying learned logic from one environment to another).

They detail how specific architectures solve EH-IoT problems:

  • Generative Adversarial Networks (GANs): Used for channel estimation and optimizing 3D antenna designs.
  • Variational Autoencoders (VAEs): Employed for unsupervised relay topology design and dimensionality reduction in energy forecasting.
  • Diffusion Models: Integrated into Deep Reinforcement Learning (DRL) to improve decision-making policies.
  • Transformers: Used for handling long-range dependencies in network data sequences.

A highlight of the paper is a case study featuring a Diffusion model-based Twin Delayed Deep Deterministic policy gradient (DTD3) algorithm. This novel approach uses the reverse process of a diffusion model to refine the "actor" in a DRL framework, helping a UAV (Unmanned Aerial Vehicle) decide how to move and charge IoT devices to minimize the Age of Information (AoI)—a metric for data freshness.

Datasets

The paper references several data sources used across different applications:

  • Synthetic Data: GANs were used to generate synthetic channel state information (CSI) and 3D antenna configurations to expand limited real-world datasets.
  • Solar Power Data: A dataset spanning six months of solar power generation was used to evaluate VAE-based forecasting models.
  • Simulation Environments: The case study utilized a custom simulation environment built in Pytorch, modeling UAV trajectories and IoT energy buffers.

Key Insights and Ideas

  • Beyond Content Generation: While the public sees GenAI as a tool for text and images, this paper highlights its role as a powerful optimization engine for physical layer problems in telecommunications.
  • The "Denoiser" as a Decision Maker: In the DTD3 algorithm, the diffusion model acts as a denoiser that progressively "cleans" a random noise signal into an optimal action (e.g., a UAV's next move). This allows for much better exploration of the "action space" than traditional neural networks.
  • Solving the "Model Dependency" Trap: Traditional methods fail when the network state is unknown. GenAI models, particularly VAEs and GANs, can learn the underlying distribution of the environment, allowing the system to function effectively even with incomplete information.

Key Results

  • Channel Estimation: A Conditional GAN (CGAN) approach achieved an 82% improvement in estimation accuracy over traditional methods under low signal-to-noise ratio (SNR) conditions.
  • Energy Forecasting: A VAE-based model for solar power prediction achieved a 97.35% reduction in parameters and a 37.93% improvement in computation time compared to benchmark methods, making it suitable for resource-constrained IoT gateways.
  • UAV Case Study: The proposed DTD3 algorithm converged faster and maintained a significantly lower Average AoI compared to standard DRL algorithms (like TD3), proving that the UAV could more efficiently balance energy transfer and data collection.

Limitations and Future Work

The authors acknowledge that while GenAI is powerful, it is not a silver bullet. Key challenges include:

  • Computational Overhead: Training complex models like Transformers or Diffusion models can be resource-intensive for low-power IoT devices.
  • Interference Management: Future work needs to address how GenAI can better manage the "harmful" interference in dense wireless networks and turn it into "useful" harvested energy.
  • Distributed Beamforming: There is an opportunity to use GenAI to coordinate multiple energy sources to "aim" RF energy precisely at moving harvesters, though this requires high-precision synchronization.
  • Trade-off Strategies: More research is needed to balance the energy consumed by the AI's computations versus the energy saved through its optimizations.

Summary updated

Abstract

Internet of Things (IoT) devices are typically powered by small-sized batteries with limited energy storage capacity, requiring regular replacement or recharging. To reduce costs and maintain connectivity in IoT networks, energy harvesting technologies are regarded as a promising solution. Notably, due to its robust analytical and generative capabilities, generative artificial intelligence (GenAl) has demonstrated significant potential in optimizing energy harvesting networks. Therefore, we discuss key applications of GenAl in improving energy harvesting IoT networks in this article. Specifically, we first review the key technologies of GenAI and the architecture of energy harvesting IoT networks. Then, we show how GenAI can address different problems to improve the performance of the energy harvesting IoT networks. Subsequently, we present a case study of unmanned aerial vehicle (UAV)-enabled data col-lection and energy transfer. The case study shows distinctively the necessity of energy harvesting technology and verify the effectiveness of GenAI-based methods. Finally, we discuss some import-ant open directions.
BibTeX
@inproceedings{xie2025generative,
  author = {Wenwen Xie and Geng Sun and Jiahui Li and Jiacheng Wang and Hongyang Du and Dusit Niyato and Octavia A. Dobre},
  title = {{Generative AI for Energy Harvesting Internet of Things Network: Fundamental, Applications, and Opportunities}},
  booktitle = {IEEE Internet Things Mag},
  year = {2025},
  url = {https://openreview.net/forum?id=5WofK32132},
}

Loading related content...

Figure