Abstract
The recycling acrylonitrile–butadiene–styrene (ABS) copolymers from waste electrical and electronic equipment lightens the burden on landfills and enables us to reuse waste ABS (wABS), promoting environmental sustainability and resource conservation. In this work, the effect of electron beam irradiation on the properties of wABS by adding 1,3-bis(4,5-dihydro-2-oxazolyl)benzene (1,3-PBO) has been studied. Various characterization methods including gel permeation chromatography, Fourier-transform infrared spectroscopy, mechanical properties test, differential scanning calorimetry, and scanning electron microscopy were conducted to investigate the change of relative molecular weight, chemical structure, mechanical properties, glass transition temperature ($T_g$), and fracture morphology, respectively. Results demonstrated that the incorporation of 1,3-PBO combined with electron beam irradiation led to significant improvements in molecular weight, tensile strength, impact strength, and $T_g$. Irradiated wABS-PBO reached optimal comprehensive mechanical properties with the dose at 240 kGy. However, higher electron beam irradiation (>240 kGy) significantly reduced the tensile strength due to extensive chain scission. Besides, the fracture surface morphology became coarser with the reinforced intermolecular binding force of irradiated wABS. This study establishes electron beam irradiation as a promising and effective approach for wABS recycling and reuse.
Introduction
Acrylonitrile–butadiene–styrene (ABS) is a workhorse of the electronics industry, but it poses a significant recycling challenge. During its service life, the polybutadiene (PB) component in ABS is highly susceptible to thermo-oxidative degradation and UV damage, leading to "chain scission"—the breaking of long polymer molecules into shorter, weaker fragments. Consequently, recycled waste ABS (wABS) typically suffers from poor mechanical properties, often making it unsuitable for high-performance applications. This research explores a method to reverse this degradation by inducing controlled crosslinking reactions using electron beam (EB) irradiation and a reactive additive, 1,3-PBO, to restore the material's molecular weight and structural integrity.
Methods
The researchers employed a combination of chemical additives and high-energy radiation. Waste ABS was blended with 2.5 parts per hundred resin (phr) of 1,3-bis(4,5-dihydro-2-oxazolyl)benzene (1,3-PBO), a crosslinking agent. The blends were extruded and injection-molded into standard test specimens, which were then exposed to a 10 MeV electron beam accelerator at varying dosages ranging from 0 to 400 kGy. The team used a suite of analytical tools, including Gel Permeation Chromatography (GPC) for molecular weight, FTIR spectroscopy for chemical bonding, mechanical testing for tensile and impact strength, and SEM for fracture surface morphology.
Results and Discussion
Radical-Induced Crosslinking Mechanism
The high-energy electron beam triggers a ring-opening reaction in the 1,3-PBO molecules, creating reactive free radicals. These radicals seek out and bond with the free radicals naturally present in degraded wABS, effectively "stitching" the broken polymer backbone back together through a crosslinking network.
Mechanical Property Enhancement
The most dramatic result was the improvement in mechanical properties. The tensile strength of raw wABS was measured at 8.7 MPa. Upon adding 1,3-PBO and applying an optimal irradiation dose of 240 kGy, the tensile strength surged to 28.7 MPa, a nearly 230% improvement. Impact resistance also showed significant gains at higher dosages.
The study identified 240 kGy as the "sweet spot" for irradiation. At this point, the rate of beneficial crosslinking is at its peak relative to the rate of harmful chain scission. Dosages beyond 240 kGy led to a decline in tensile strength, proving that excessive radiation eventually causes more damage (scission) than it repairs.
Molecular Weight and Morphology
GPC analysis confirmed that short fragments were successfully integrated into larger macromolecular structures, with the weight-average molecular weight ($M_w$) increasing from 136,160 in the raw waste to 217,678 at the optimal dose. SEM imaging revealed that fracture surfaces became significantly coarser, a visual indicator of increased intermolecular binding forces and improved toughness.
Conclusion
This study establishes electron beam irradiation combined with 1,3-PBO as a promising and effective approach for upcycling waste ABS. By restoring molecular weight and significantly boosting mechanical strength, this process enables the reuse of electronic waste in high-value applications, promoting environmental sustainability and resource conservation.
Summary updated