Abstract
The accumulation of post-consumer polyethylene terephthalate (PET) necessitates the development of high-value recycling strategies. This study presents a "circular upcycling" route that transforms waste PET into high-performance, semi-aromatic polyamides (SAPs). By employing aminolysis with bio-based reagents derived from castor oil, we synthesized a series of polymers with bio-based content reaching up to 79%. The resulting materials exhibit excellent thermal stability and tunable mechanical properties, offering a sustainable alternative to conventional petroleum-derived engineering plastics.
Introduction
Polyethylene Terephthalate (PET) is a ubiquitous thermoplastic, yet its current recycling landscape is dominated by mechanical processes that often result in "downcycling"—a progressive loss of material quality. While chemical recycling methods like methanolysis exist, they typically aim to regenerate virgin PET for single-use applications. There is a critical need for "upcycling" strategies that convert plastic waste into durable, high-performance materials with extended lifecycles.
Semi-aromatic polyamides (SAPs), such as polyphthalamides, are essential engineering plastics used in automotive and electronic sectors due to their high melting points and thermal resistance. However, these materials are traditionally synthesized from petroleum-based feedstocks. This research explores a hybrid approach, utilizing recycled aromatic units from PET and renewable aliphatic segments from biomass to create sustainable SAPs.
Methodology
The synthesis of the semi-aromatic polyamides followed a two-step chemical pathway:
1. Aminolysis of PET
Waste PET was depolymerized using amines as "molecular scissors" rather than water or methanol. The researchers utilized hexamethylene diamine (HMD) and the bio-based 1,10-diaminodecane (DMD) in the presence of a TBD (1,5,7-triazabicyclo[4.4.0]dec-5-ene) catalyst at ambient pressure. This step yielded terephthalamide precursors, specifically HMDTA and DMDTA, which retain the aromatic rings from the original PET backbone.
2. Solution Polycondensation
The recycled precursors were subsequently reacted with dicarboxylic acids—either adipic acid or bio-based sebacic acid—through solution polycondensation. This process resulted in four distinct SAPs: PA 6.6.T, PA 6.10.T, PA 10.6.T, and PA 10.10.T. To improve the flexibility of these inherently brittle materials, a copolyamide was also synthesized by incorporating a bio-based "dimer diamine" into the polymer backbone.
The synthesized polymers were characterized using Nuclear Magnetic Resonance (NMR) and Fourier-Transform Infrared (FTIR) spectroscopy for structural verification, Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA) for thermal profiling, and Gel Permeation Chromatography (GPC) for molecular weight determination.
Results and Discussion
Thermal and Mechanical Performance
The synthesized SAPs demonstrated exceptional thermal stability, a prerequisite for engineering applications. Melting points ($T_m$) were recorded between 218°C and 281°C, while degradation temperatures ($T_{d5\%}$) consistently exceeded 329°C. These values are comparable to commercial SAP standards.
Mechanically, the materials showed high stiffness, with Young’s modulus values reaching up to 1086 MPa. However, the base SAPs were characterized by brittleness, with elongation at break ranging from 3.9% to 10.1%. A significant breakthrough was achieved with the introduction of the bio-based dimer diamine in the PA 6.6DD copolyamide, which increased the elongation at break to 16.9% without compromising the material's integrity.
Sustainability Metrics
A key highlight of this approach is the tunable nature of the polymer's sustainable content. By selecting different reagents, the researchers produced materials containing 21% to 31% recycled carbon and 0% to 79% bio-based carbon. The use of aminolysis at ambient pressure also suggests a lower energy requirement compared to high-pressure chemical recycling methods.
Structural Insights
The study revealed that chain length symmetry plays a vital role in material properties. For instance, PA 10.10.T (with matched aliphatic segments) exhibited a significantly higher Young’s modulus than the mismatched PA 10.6.T. This is attributed to more efficient molecular packing and stronger hydrogen bonding within the symmetric polymer chains.
Conclusion
This research successfully demonstrates a viable pathway for upcycling post-consumer PET into high-value, semi-aromatic polyamides. By integrating recycled waste with renewable biomass, the study addresses both plastic pollution and the reliance on fossil fuels for engineering plastics. While the current materials show promise, future work will focus on optimizing polymerization conditions to achieve higher molecular weights and conducting a comprehensive Life Cycle Analysis (LCA) to validate the environmental benefits of this circular upcycling route.
Summary updated