Abstract
In this paper, we investigate the design of energy-efficient beamforming for an ISAC system, where the transmitted waveform is optimized for joint multi-user communication and target estimation simultaneously. We aim to maximize the system energy efficiency (EE), taking into account the constraints of a maximum transmit power budget, a minimum required signal-to-interference-plus-noise ratio (SINR) for communication, and a maximum tolerable Cramer-Rao bound (CRB) for target estimation. We first consider communication-centric EE maximization. To handle the non-convex fractional objective function, we propose an iterative quadratic-transform-Dinkelbach method, where Schur complement and semi-definite relaxation (SDR) techniques are leveraged to solve the subproblem in each iteration. For the scenarios where sensing is critical, we propose a novel performance metric for characterizing the sensing-centric EE and optimize the metric adopted in the scenario of sensing a point-like target and an extended target. To handle the nonconvexity, we employ the successive convex approximation (SCA) technique to develop an efficient algorithm for approximating the nonconvex problem as a sequence of convex ones. Furthermore, we adopt a Pareto optimization mechanism to articulate the tradeoff between the communication-centric EE and sensing-centric EE. We formulate the search of the Pareto boundary as a constrained optimization problem and propose a computationally efficient algorithm to handle it. Numerical results validate the effectiveness of our proposed algorithms compared with the baseline schemes and the obtained approximate Pareto boundary shows that there is a non-trivial tradeoff between communication-centric EE and sensing-centric EE, where the number of communication users and EE requirements have serious effects on the achievable tradeoff.
Introduction
As we move toward 6G, Integrated Sensing and Communications (ISAC) has emerged as a flagship technology. It allows base stations to simultaneously serve cellular users and "see" the environment—tracking objects like UAVs or vehicles—using the same hardware and frequency bands. However, the high power consumption of modern 5G/6G networks makes energy efficiency (EE) a critical concern. While previous research has focused on maximizing data rates or minimizing sensing errors (measured by the Cramér-Rao Bound, or CRB), the "bits-per-Joule" aspect of ISAC remains under-explored. This paper addresses the challenge of designing waveforms that maximize the ratio of performance to power consumption when the system has two competing goals.
System Model
The system consists of a dual-functional ISAC base station (BS) equipped with multiple antennas. The BS serves $K$ single-antenna communication users while simultaneously performing radar sensing on targets in the environment.
As illustrated in Figure 1, the study considers two distinct physical scenarios for sensing:
- Point-like targets: Unstructured objects located far from the BS, such as a drone.
- Extended targets: Larger objects nearby that act as reflecting surfaces, such as a car.
The objective is to optimize the beamforming weights to maximize energy efficiency while satisfying constraints on transmit power, communication SINR, and sensing accuracy (CRB).
Methodology
The optimization problem is non-convex and fractional, making it difficult to solve directly. The authors propose a three-pronged approach:
1. Communication-Centric EE
This approach focuses on maximizing the data rate per Joule while meeting a minimum sensing accuracy requirement. The authors utilize the Dinkelbach method and Quadratic Transform to convert the fractional objective into a series of manageable convex sub-problems.
2. Sensing-Centric EE
A novel metric is introduced: the reciprocal of the CRB divided by the total power, representing "sensing information per Joule." To optimize this, Successive Convex Approximation (SCA) and the Schur Complement are employed to transform complex sensing constraints into Linear Matrix Inequalities (LMIs).
3. Pareto Optimization
To navigate the tradeoff between communication and sensing, a Pareto optimization mechanism is adopted. By formulating the search for the Pareto boundary as a constrained optimization problem, network operators can quantify the sacrifice in communication efficiency required to achieve specific sensing performance levels.
Numerical Results and Discussion
The proposed algorithms were evaluated using numerical simulations with a BS equipped with 20 antennas and a maximum transmit power of 30 dBm.
Key Findings: * Convergence: The iterative algorithms are computationally efficient, typically converging within 12 iterations. * Performance Gain: The energy-efficient design significantly outperforms traditional "sum-rate maximization" baselines. Unlike baselines that waste power for marginal rate gains, the proposed algorithm identifies the optimal "sweet spot" on the power curve. * Tradeoff Dynamics: The Pareto boundary reveals that while high communication efficiency can coexist with baseline sensing, demanding extreme sensing accuracy leads to a sharp drop in communication EE. * Impact of Users: Increasing the number of communication users ($K$) consumes spatial degrees of freedom, reducing the room available to optimize for sensing efficiency.
Conclusion
This work provides a comprehensive framework for energy-efficient beamforming in ISAC systems. By introducing a sensing-centric EE metric and a Pareto optimization approach, it offers valuable insights into the fundamental tradeoffs between communication and radar performance. Future work will explore extending this framework to more complex architectures like Cell-Free Massive MIMO and Reconfigurable Intelligent Surfaces (RIS) to further enhance the energy efficiency of future 6G networks.
Summary updated