Diboride compounds doped with transition metals$\unicode{x2013}$a route to superconductivity through structure stabilization as well as defects

Philip M. Dee, J. S. Kim, Ajinkya C. Hire, Jinhyuk Lim, Laura Fanfarillo, Shubham Sinha, J. J. Hamlin, Richard G. Hennig, P. J. Hirschfeld, G. R. Stewart

TL;DR

Researchers have successfully induced superconductivity in molybdenum diboride (MoB₂) at ambient pressure—a state previously only seen under extreme compression (100 GPa). By using transition metal doping to stabilize a specific crystal structure and rapid "splat-quenching" to freeze in beneficial defects, the team achieved critical temperatures ($T_c$) up to 10.7 K.

What Problem Does This Paper Address?

Since the 2001 discovery of superconductivity in magnesium diboride (MgB₂), scientists have searched for transition metal diborides that could match its impressive 39 K critical temperature. Molybdenum diboride (MoB₂) emerged as a top contender, but with a catch: at normal pressure, its boron layers are "puckered," and it doesn't superconduct. Under massive pressure (70–100 GPa), the structure shifts to a flat-layered hexagonal phase ($P6/mmm$), and $T_c$ jumps to 32 K.

The challenge addressed here is metastability: How can we trick MoB₂ into adopting its high-pressure, superconducting structure at room pressure? The authors explore two routes: chemical "pressure" via doping and kinetic "trapping" via rapid cooling.

Methods

The researchers employed two primary synthesis strategies:

  1. Chemical Doping: They substituted Molybdenum with other transition metals (Zr, Hf, Ta) using standard arc-melting. These dopants have fewer d-electrons, which helps flatten the boron layers.
  2. Rapid Cooling (Quenching): To trap metastable states, they used two techniques:
  3. $\rho$-bars: Casting molten metal into water-cooled molds (cooling rate $\sim 10^4$ °C/s).
  4. Splat-quenching: A custom-built device that uses high-pressure argon to slam a molten sample against a water-cooled copper block, freezing the structure almost instantaneously.

Characterization was performed using X-ray diffraction (XRD) for structure, four-point probe resistivity measurements for $T_c$ onset, and low-temperature specific heat measurements to confirm that superconductivity was a "bulk" property of the material rather than a surface effect.

Datasets

As an experimental condensed matter physics paper, it does not use traditional "big data" training sets. However, it utilizes:

  • The Materials Project database: Used for cross-referencing and identifying XRD patterns.
  • Literature Benchmarks: Comparative data from previous studies on Sc, Nb, and Zr-doped diborides to establish trends in electron-phonon coupling ($\lambda$) and the density of states (DOS).

Key Insights and Ideas

  • Structural Stabilization: Doping with Zr, Hf, or Ta successfully stabilizes the $P6/mmm$ (MgB₂-type) structure at ambient pressure. This confirms that reducing the electron count in the metal layers prevents the boron layers from puckering.
  • The Power of Quenching: Rapid cooling was found to significantly boost $T_c$. For example, Nb-doped MoB₂ saw its $T_c$ rise from 8.05 K (slow-cooled) to 10.67 K (quenched).
  • Superconducting MoB₂ at 1 atm: Most notably, the authors report the first observation of superconductivity in pure MoB₂ at ambient pressure ($T_c \approx 4.5$ K) achieved through splat-quenching. This is likely due to the creation of "P6/mmm-like" defects or stacking faults that mimic the high-pressure environment.
  • Weak Coupling: Despite achieving the desired structure, the ambient-pressure compounds exhibit "weak-coupling" superconductivity ($\lambda \approx 0.4 - 0.6$). This explains why their $T_c$ (max ~11 K) is still much lower than the 32 K seen at 100 GPa.

Key Results

  • Highest $T_c$: Achieved in quenched Nb$_{0.25}$Mo$_{0.75}$B₂ at 10.67 K.
  • Doping Effects: Zr-doping yielded a $T_c$ of ~8.5 K, while Ta-doping resulted in lower temperatures (~2.4–3.2 K).
  • Bulk Confirmation: Specific heat jumps ($\Delta C/\gamma T_c$) ranged from 0.53 to 1.32, indicating that a significant fraction of the samples (up to ~90%) was superconducting.
  • Structure: XRD confirmed that doping successfully shifted the samples from the $R\bar{3}m$ (puckered) phase to the $P6/mmm$ (flat) phase.

Limitations and Future Work

  • Structural Uncertainty: While splat-quenching induces superconductivity in pure MoB₂, the XRD patterns for these samples are "ill-defined," making it difficult to pinpoint the exact nature of the defects responsible.
  • The $T_c$ Gap: There remains a large gap between the 10 K achieved here and the 32 K seen under high pressure. The authors suggest that while they stabilized the structure, they haven't yet replicated the high electronic density of states or strong coupling provided by physical compression.
  • Future Direction: The authors suggest that further studies into the precise Boron-to-Metal ratio and the role of vacancies in quenched samples are necessary to unlock higher transition temperatures.

Summary updated

Abstract

Recent investigations into MoB$_{2}$ have unveiled a direct connection between a pressure-induced structural transition to a P6/mmm space group structure and the emergence of superconductivity, producing critical temperatures up to 32 K at 100 GPa. This pressure-induced superconducting state underscores the potential of doped MoB$_{2}$ as a possible candidate for metastable superconductivity at ambient pressure. In this work, we demonstrate that doping by Zr, Hf, or Ta stabilizes the P6/mmm structure at ambient pressure and results in the realization of a superconducting state with critical temperatures ranging from 2.4 up to 8.5 K depending on the specific doping. We estimate the electron-phonon coupling $λ$ and the density of states based on resistivity and specific heat data, finding that $λ$ ranges from 0.4 - 0.6 for these compounds. Finally, to investigate the role of possible metastable defect structures on the critical temperature, we analyze MoB$_{2}$, MoB$_{2.5}$, and Nb/Zr-doped MoB$_{2}$ using rapid cooling techniques. Notably, splat-quenching produces samples with higher critical temperatures and even retains superconductivity in MoB$_{2}$ at ambient pressure, achieving a critical temperature of 4.5 K.
BibTeX
@inproceedings{dee2024diboride,
  author = {Philip M. Dee and J. S. Kim and Ajinkya C. Hire and Jinhyuk Lim and Laura Fanfarillo and Shubham Sinha and J. J. Hamlin and Richard G. Hennig and P. J. Hirschfeld and G. R. Stewart},
  title = {{Diboride compounds doped with transition metals$\textbackslash\{\}unicode\{x2013\}$a route to superconductivity through structure stabilization as well as defects}},
  booktitle = {Physical},
  year = {2024},
  doi = {10.1103/physrevb.109.104520},
}

Loading related content...

Figure