Abstract
This article demonstrates a new kind of programmable logic for the representation of an integer that can be used for the programmable Josephson voltage standard. It can enable the numbers of junctions in most bits to be variable integer values, which is different from normal binary logic or ternary logic. Consequently, missing junctions due to superconducting short circuits can be tolerated under this logic. This logic can also have nearly the same segmentation efficiency as ternary logic. The completeness of the sequences using this logic is proven by the recursive method in mathematics in this paper. After that, a new algorithm for the representation of integers is presented according to the proven process, and an analysis of the number of fault-tolerant junctions for each bit is provided. Although the first and second bits are not tolerant to missing junctions, bits beyond these can tolerate one to hundreds of missing junctions. Due to the non-fixed multiples between the bits of the sequence, this logic is called non-integer-multiple logic. Finally, the design and fabrication of a 3 V programmable Josephson junction array using this logic are described, and the measurements and analysis of the characteristic parameters are presented.
Introduction
In the field of precision metrology, the Josephson voltage standard is the definitive reference for voltage. The output voltage of such a device is directly proportional to the number of active superconducting Josephson junctions ($m$) in an array. Traditionally, these arrays are organized into "bits" following rigid binary ($2^n$) or ternary ($3^n$) sequences. However, manufacturing these arrays is exceptionally challenging; a single microscopic defect can cause a "missing junction" (a superconducting short). In a strict ternary or binary system, such a defect breaks the mathematical sequence, creating "holes" in the achievable voltage range and rendering the high-precision instrument unreliable.
The Non-Integer-Multiple Logic (NIMS) Framework
To overcome the limitations of traditional logic, researchers have introduced Non-Integer-Multiple Logic (NIMS). Unlike binary or ternary logic where each bit is a fixed multiple of the last, NIMS allows the number of junctions in each bit ($a_n$) to be a variable integer, provided it stays within specific mathematical bounds—roughly up to three times the value of the preceding bit.
Using a recursive mathematical proof, the authors established that as long as the bits obey these inequality constraints, the sequence remains "complete," meaning every integer $m$ within the array's range can still be represented. This mathematical "slack" acts as a buffer: if a large bit loses junctions due to a fabrication error, the surrounding bits can compensate, ensuring no voltages are missing from the output spectrum.
Hardware Implementation and Results
The team fabricated a physical 3 V array using Nb/(NbₓSi₁₋ₓ/Nb)₂ stacked junctions, featuring 92,098 junctions distributed across 16 branches. To operate this hardware, they developed a new representation algorithm to determine which bits to activate for a target voltage, even when bit values are irregular.
As shown in the comparative analysis above, NIMS maintains a segmentation efficiency (the ratio of resolution to control lines) nearly identical to ternary logic, which is significantly more efficient than binary. Crucially, the fault tolerance increases with bit size. While the smallest bits ($a_0, a_1$) cannot tolerate defects, the most significant bits can tolerate hundreds. For example, in the 3 V circuit, bit $a_6$ (nominally 1,434 junctions) was shown to tolerate up to 242 missing junctions, while larger bits could tolerate more than 100 defects each without affecting accuracy.
The experimental I-V characteristics verify the successful operation of the device. Under an 18.01 GHz drive frequency, the system achieved stable, quantized voltage steps ranging from 2.5 mV up to the full 3.2 V output.
Conclusion
The demonstration of NIMS logic represents a significant step forward in creating resilient, high-precision voltage standards. By moving away from fixed-multiple bit sequences, NIMS provides a robust framework that can tolerate significant manufacturing imperfections without sacrificing performance. Future work will focus on addressing the vulnerability of the smallest bits and optimizing the computational efficiency of the NIMS algorithm for high-speed applications.
Summary updated