Abstract
Quantum metrology based on Josephson junction array reproduces the most accurate desired voltage by far, therefore being introduced to provide voltage standards worldwide. In this work, we quantitatively analyzed the dependence of the first Shapiro step height of the junction array at 50 GHz on the parameter spread of 10,000 Josephson junctions by numerical simulation with resistively shunted junction model. The results indicate an upper limit spread of the critical current and resistance of the Josephson junctions. Specifically, to keep the maximum first Shapiro step above 0.88 mA, the critical current standard deviation, $\sigma$, should not exceed 25%, and for it to stay above 0.6 mA, the resistance standard deviation should not exceed 1.5%.
Introduction
The Josephson Voltage Standard (JVS) serves as the global benchmark for accuracy, linking voltage directly to frequency through fundamental constants. Currently, most JVS systems utilize low-temperature superconductors (LTS) requiring liquid helium cooling (4 K), which necessitates bulky and expensive infrastructure. Transitioning to high-temperature superconductors (HTS) would enable operation at 77 K (liquid nitrogen), significantly reducing costs and improving portability.
However, HTS fabrication presents substantial challenges. Achieving useful voltage levels requires arrays of over 10,000 junctions. If these junctions exhibit significant "parameter spread"—variations in physical properties—the quantum-locked Shapiro steps used to define voltage become "smeared" and unusable for metrology.
Methodology
This study employs a numerical simulation based on the Resistively Shunted Junction (RSJ) model to define tolerance limits for parameter spread. The researchers simulated a series array of 10,000 Josephson junctions, solving the governing differential equations for phase difference ($\phi$) using the Euler method in MATLAB. A time step of $1 \times 10^{-12}$ seconds was used to capture high-frequency oscillations at 50 GHz.
Crucially, the model incorporates thermal noise (Nyquist noise) at 77 K to simulate realistic operating conditions. Parameter spread was modeled using Gaussian distributions for critical current ($I_c$) and normal state resistance ($R_n$). The simulation was validated against theoretical Bessel function predictions for single junctions before scaling to the full array.
Results and Discussion
The simulation reveals a significant sensitivity asymmetry between current and resistance variations. While the array maintains functionality with a 25% spread in critical current, it is extremely sensitive to resistance spread.
The "Smearing" Effect
As parameter spread increases, the sharp, flat plateaus of the Shapiro steps—essential for precise voltage definition—tilt and smooth out. This "smearing" effect eventually destroys the quantum-locking properties of the array.
Quantitative Tolerance Limits
- Critical Current ($I_c$): For a perfectly uniform array, the first Shapiro step height is 2.21 mA. At a 25% spread ($\sigma$), the height decreases to 0.88 mA. This 25% threshold is identified as the upper limit for a viable HTS voltage standard.
- Resistance ($R_n$): Resistance variation is far more critical. A spread of just 0.5% reduces the step height to 1.77 mA. By 1.5% spread, the height drops to 0.6 mA, and at 2%, the step effectively disappears (0.17 mA).
Conclusion
This work establishes the first quantitative tolerance limits for HTS Josephson junction arrays. To maintain a functional voltage standard, fabricators must achieve a critical current spread of less than 25% and, more challengingly, a resistance spread of less than 1.5%. Technologies such as Helium-Focused Ion Beam (He-FIB) patterning are likely necessary to meet these stringent uniformity requirements. Future research will focus on experimental validation of these limits and addressing microwave power distribution challenges in large-scale arrays.
Summary updated