Critical role of electrons in the short lifetime of blue OLEDs

Jaewook Kim, Joonghyuk Kim, Yongjun Kim, Young-Mok Son, Young-Sik Shin, Hye Jin Bae, Ji Whan Kim, Sungho Nam, Yongsik Jung, Hyeonsu Kim, Sungwoo Kang, Yoon-Soo Jung, Kyung-Hoon Lee, Hyeonho Choi, Woo Youn KimNature Communications 2023 · DOI

Abstract

Designing robust blue organic light-emitting diodes is a long-standing challenge in the display industry. The highly energetic states of blue emitters cause various degradation paths, leading to collective luminance drops in a competitive manner. However, a key mechanism of the operational degradation of organic light-emitting diodes has yet to be elucidated. Here, we show that electron-induced degradation reactions play a critical role in the short lifetime of blue organic light-emitting diodes. Our control experiments demonstrate that the operational lifetime of a whole device can only be explained when excitons and electrons exist together. We examine the atomistic mechanisms of the electron-induced degradation reactions by analyzing their energetic profiles using computational methods. Mass spectrometric analysis of aged devices further confirm the key mechanisms. These results provide new insight into rational design of robust blue organic light-emitting diodes.

Introduction

Organic Light-Emitting Diodes (OLEDs) have transformed modern display technology, yet blue pixels remain a significant hurdle due to their notoriously short operational lifespans. Blue Phosphorescent OLEDs (PhOLEDs) typically exhibit lifetimes 10 to 40 times shorter than their red and green counterparts. Historically, the industry has attributed this rapid degradation to the high-energy "triplet excitons" required for blue light emission, assuming they were the primary cause of chemical bond breakage. However, despite extensive efforts in "exciton management," blue OLED lifetimes have failed to meet commercial standards. This research identifies a critical missing factor: the role of polarons, specifically electrons, in triggering irreversible chemical reactions that degrade emitters and create light-quenching defects.

Experimental and Computational Methodology

To isolate the impact of electrons on device longevity, the researchers employed a multi-pronged approach:

  1. Experimental Control Setups: Three distinct environments were compared: a standard "Whole Device" (WD) with both holes and electrons; an "Exciton-Only" environment (EOD + UV) where excitons were generated via external UV light without current; and an "Exciton + Electron" environment (EOD + UV + Current) where electrons flowed through the emissive layer (EML) alongside UV-generated excitons.
  2. Computational Chemistry: Density Functional Theory (DFT) was used to calculate activation barriers and bond dissociation energies (BDE) for various iridium (Ir) complexes, modeling how the addition of an electron affects molecular stability.
  3. Mass Spectrometry: High-resolution OrbiSIMS analysis was performed on aged devices to identify chemical fragments, providing physical evidence of the predicted degradation products.

The Synergy of Destruction: Electron-Induced Pathways

The study reveals that excitons alone are often insufficient to cause rapid device failure. Instead, degradation is a collaborative process between electrons and excitons. The researchers identified three primary electron-induced pathways: direct ligand breaking by electrons, and two "one-two punch" mechanisms where an exciton weakens a metal-carbon bond, followed by an electron triggering total ligand detachment.

Proposed degradation pathways showing how the addition of an electron to ground and excited states leads to anion states and subsequent degradation products.

Computational analysis showed that adding an electron can reduce the BDE to less than 30 kcal/mol, making bonds vulnerable to breaking even at room temperature. Furthermore, the spatial distribution of the added electron matters; in certain emitters, the electron localizes near weak bonds, acting as a chemical "scissor."

Key Results and Lifetime Analysis

The experimental results underscored the dramatic impact of electrons. For instance, while Emitter 1 showed a moderate decrease in lifetime when electrons were introduced, Emitter 2 exhibited a much more significant drop, falling from approximately 6.6 hours in an exciton-only environment to 4.8 hours when electrons were present. For Emitter 3, the lifetime plummeted from 7.5 hours to 2.5 hours. This discrepancy confirms that managing excitons alone is insufficient for achieving commercial longevity.

Comparison of device lifetimes (LT95) for Emitter 1 and Emitter 2 under different operational conditions, highlighting the impact of electron-induced degradation.

Mass spectrometry further validated these findings by identifying specific molecular fragments in aged devices that matched the weights predicted by the electron-induced degradation models.

Conclusion and Future Outlook

This work provides a breakthrough in understanding the failure mechanisms of blue OLEDs, shifting the focus from purely exciton-based degradation to the critical role of electrons. While the study focused on iridium-based phosphorescent emitters, the implications are broad. The next challenge for the industry is "rational design": developing new host materials and "electron-tolerant" molecular architectures that can either prevent electron trapping or maintain bond integrity in the presence of extra electrons. Such advancements are essential to bridging the lifetime gap between blue and other OLED colors for commercial applications.

Summary updated

Abstract

Designing robust blue organic light-emitting diodes is a long-standing challenge in the display industry. The highly energetic states of blue emitters cause various degradation paths, leading to collective luminance drops in a competitive manner. However, a key mechanism of the operational degradation of organic light-emitting diodes has yet to be elucidated. Here, we show that electron-induced degradation reactions play a critical role in the short lifetime of blue organic light-emitting diodes. Our control experiments demonstrate that the operational lifetime of a whole device can only be explained when excitons and electrons exist together. We examine the atomistic mechanisms of the electron-induced degradation reactions by analyzing their energetic profiles using computational methods. Mass spectrometric analysis of aged devices further confirm the key mechanisms. These results provide new insight into rational design of robust blue organic light-emitting diodes.
BibTeX
@inproceedings{kim2023critical,
  author = {Jaewook Kim and Joonghyuk Kim and Yongjun Kim and Young-Mok Son and Young-Sik Shin and Hye Jin Bae and Ji Whan Kim and Sungho Nam and Yongsik Jung and Hyeonsu Kim and Sungwoo Kang and Yoon-Soo Jung and Kyung-Hoon Lee and Hyeonho Choi and Woo Youn Kim},
  title = {{Critical role of electrons in the short lifetime of blue OLEDs}},
  booktitle = {Nature Communications},
  year = {2023},
  doi = {10.1038/s41467-023-43408-7},
}
Figure