Unraveling the luminescence signatures of chemical defects in polyethylene

Lihua Chen, Tran Doan Huan, Chenchen Wang, Rampi RamprasadThe Journal of Chemical Physics 2015 · DOI · arXiv

Abstract

Chemical defects in polyethylene (PE) can deleteriously downgrade its electrical properties and performance. Although these defects usually leave spectroscopic signatures in terms of characteristic luminescence peaks, it is nontrivial to make unambiguous assignments of the peaks to specific defect types. In this work, we go beyond traditional density functional theory calculations to determine intra-defect state transition and charge recombination process derived emission and absorption energies in PE. By calculating the total energy differences of the neutral defect at excited and ground states, the emission energies from intra-defect state transition are obtained, reasonably explaining the photoluminescence peaks in PE. In order to study the luminescence emitted in charge recombination processes, we characterize PE defect levels in terms of thermodynamic and optical charge transition levels that involve total energy calculations of neutral and charged defects. Calculations are performed at several levels of theory including those involving (semi)local and hybrid electron exchange-correlation functionals, and many-body perturbation theory. With these critical elements, the emission energies are computed and further used to clarify and confirm the origins of the observed electroluminescence and thermoluminescence peaks.

Introduction

Polyethylene (PE) is the primary insulating material for high-voltage power cables and energy-storage capacitors. However, its long-term reliability is often compromised by chemical defects—typically arising from oxidation or manufacturing impurities. These defects act as "traps" for electrical charges, degrading material performance and potentially leading to catastrophic electrical breakdown.

While scientists can detect these defects using luminescence (measuring light emitted when charges fall into or out of these traps), identifying the specific chemical structure responsible for a given spectral peak has historically been a challenge. Traditional Density Functional Theory (DFT) notoriously underestimates the electronic band gap of insulators, making it nearly impossible to accurately place defect energy levels and predict their spectroscopic signatures.

Computational Methodology

To address this, researchers developed a high-precision computational "prescription" using a hierarchy of quantum mechanical simulations. The study focused on six common defects: carbonyl, dienone, vinyl, hydroxyl, isolated double bonds, and conjugated double bonds.

Schematic representation of common chemical defects in polyethylene, including carbonyl, vinyl, and hydroxyl groups.

Instead of relying on single-electron energy levels, the team calculated the total energy of the system in different charge states (neutral, +1, and -1). This approach accounts for atomic relaxation by distinguishing between "optical" transitions (where atoms remain stationary) and "thermodynamic" transitions (where the lattice relaxes). Crucially, the study compared standard PBE (semi-local) calculations with the HSE06 hybrid functional and the many-body perturbation theory-based "GW" method. The GW method proved essential, providing a band gap of 8.95 eV, which aligns closely with the experimental value of ~8.8 eV.

Results and Discussion

The most significant finding is that while simple DFT (PBE) can approximate defect levels relative to electrostatic potential, it fails to correctly predict the band edges. Because luminescence is measured relative to these edges, the high-level GW method is required to establish the correct "frame of reference."

Calculated energy levels for various defects in polyethylene using PBE, HSE06, and GW methods compared to experimental band edges.

Defect-Specific Signatures

The analysis revealed distinct mechanisms for different defect types:

  • Carbonyl, Dienone, and Conjugated Double Bonds: Luminescence likely results from an electron jumping from the conduction band to a neutral defect, creating a negative (-1) state.
  • Vinyl Defects: These behave differently; their signature most likely comes from an electron jumping from the conduction band to a positively charged (+1) defect, returning it to neutral.
  • Stability: The study found that carbonyl, dienone, and hydroxyl defects are not stable in a positive charge state within the PE band gap.

The calculated emission energies showed excellent correspondence with experimental peaks. For example, the calculated range for dienone (2.36–3.04 eV) matches well with experimental photoluminescence observations (2.25–3.54 eV).

Conclusion

The authors propose a cost-effective 4-step workflow: calculate transition levels with efficient PBE, determine band edges with the more accurate GW method, apply a correction factor, and finally determine the emission energy. While this study assumes a crystalline environment, future work will explore the impact of the semi-crystalline or amorphous nature of real-world PE. This "prescription" offers a general-purpose tool for identifying defects in various organic polymers used in electronics and energy applications.

Summary updated

Abstract

Chemical defects in polyethylene (PE) can deleteriously downgrade its electrical properties and performance. Although these defects usually leave spectroscopic signatures in terms of characteristic luminescence peaks, it is nontrivial to make unambiguous assignments of the peaks to specific defect types. In this work, we go beyond traditional density functional theory calculations to determine intra-defect state transition and charge recombination process derived emission and absorption energies in PE. By calculating the total energy differences of the neutral defect at excited and ground states, the emission energies from intra-defect state transition are obtained, reasonably explaining the photoluminescence peaks in PE. In order to study the luminescence emitted in charge recombination processes, we characterize PE defect levels in terms of thermodynamic and optical charge transition levels that involve total energy calculations of neutral and charged defects. Calculations are performed at several levels of theory including those involving (semi)local and hybrid electron exchange-correlation functionals, and many-body perturbation theory. With these critical elements, the emission energies are computed and further used to clarify and confirm the origins of the observed electroluminescence and thermoluminescence peaks.
BibTeX
@article{chen2015unraveling,
  author = {Lihua Chen and Tran Doan Huan and Chenchen Wang and Rampi Ramprasad},
  title = {{Unraveling the luminescence signatures of chemical defects in polyethylene}},
  journal = {The Journal of Chemical Physics},
  year = {2015},
  doi = {10.1063/1.4931986},
}
Figure