Abstract: High-pressure electrical resistivity measurements reveal that the mechanical deformation of ultra-hard WB2 during compression induces superconductivity above 50 GPa with a maximum superconducting critical temperature, Tc of 17 K at 90 GPa. Upon further compression up to 190 GPa, the Tc gradually decreases. Theoretical calculations show that electron-phonon mediated superconductivity originates from the formation of metastable stacking faults and twin boundaries that exhibit a local structure resembling MgB2 (hP3, space group 191, prototype AlB2). Synchrotron x-ray diffraction measurements up to 145 GPa show that the ambient pressure hP12 structure (space group 194, prototype WB2) continues to persist to this pressure, consistent with the formation of the planar defects above 50 GPa. The abrupt appearance of superconductivity under pressure does not coincide with a structural transition but instead with the formation and percolation of mechanically-induced stacking faults and twin boundaries. The results identify an alternate route for designing superconducting materials.
Introduction
The search for new superconductors often focuses on finding materials with specific crystal structures. A famous example is magnesium diboride ($MgB_2$), which has a remarkably high critical temperature ($T_c$) of 39 K. Scientists have long looked at "isoelectronic" cousins—materials with the same number of valence electrons—to see if they can replicate this success. Tungsten diboride ($WB_2$) is one such cousin, but it normally adopts a different, more complex crystal structure ($hP12$) that is not superconducting. While previous studies suggested $WB_2$ might become superconducting under pressure, the results were inconsistent. This study aims to resolve the paradox of why $WB_2$ becomes superconducting even when X-ray data suggests its bulk structure remains unchanged.
Methods
The research team combined high-pressure experimental physics with advanced computational modeling. High-quality single crystals of $WB_2$ were synthesized using arc-melting and subjected to pressures up to 187 GPa using Diamond Anvil Cells (DACs). Electrical resistivity was measured as a function of temperature and magnetic field to identify the superconducting transition. Structural analysis was performed using Synchrotron X-ray Diffraction (XRD) at the Advanced Photon Source to track the crystal structure under pressure. Finally, Density Functional Theory (DFT) was employed to calculate the stability (enthalpy) and superconducting properties of various possible phases and specific defect structures like stacking faults and twin boundaries.
Experimental Results
Superconductivity in $WB_2$ was found to appear abruptly above 50 GPa. The critical temperature ($T_c$) peaks at 17 K at approximately 91 GPa, followed by a gradual decline with further compression. At 63 GPa, the zero-temperature upper critical field ($\mu_0H_{c2}(0)$) was measured at 2.36 T. Notably, the experimental bulk modulus was determined to be 267 GPa, confirming $WB_2$ as an exceptionally stiff, ultra-hard material.
The Defect-Induced Percolation Mechanism
The most striking insight from this work is that superconductivity in $WB_2$ is filamentary rather than a bulk phase transition. Synchrotron XRD confirmed that the bulk material remains in the $hP12$ phase even at 145 GPa, which typically would rule out superconductivity. However, DFT calculations revealed that pressure-induced mechanical deformation creates stacking faults and twin boundaries. These planar defects create a local atomic environment that mimics the $hP3$ structure of $MgB_2$.
While the bulk $hP3$ phase is energetically unstable, these local "scars" are stable enough to carry supercurrent. When the density of these defects reaches a percolation threshold, they form a continuous superconducting path through the sample. This explains the irreversible behavior observed during decompression; once the defects are "squeezed" into existence, they persist until internal stresses are fully relieved.
Conclusion
This study identifies an alternate route for designing superconducting materials through "defect engineering." By inducing metastable planar defects that locally mimic high-$T_c$ structures, superconductivity can be achieved in materials that are otherwise non-superconducting in their bulk form. Future work may focus on stabilizing these defects at ambient pressure through chemical doping or specific mechanical processing, potentially leading to new high-hardness, high-$T_c$ materials.
Summary updated