Cooperative Reflection and Synchronization Design for Distributed Multiple-RIS Communications

Yaqiong Zhao, Wei Xu, Xiaohu You, Ning Wang, Huan SunarXiv 2022 · DOI · arXiv

TL;DR

Distributed Reconfigurable Intelligent Surfaces (RISs) promise massive capacity and coverage gains for 6G networks, but only if their reflected signals arrive at the receiver perfectly synchronized. This paper introduces a unified framework to jointly estimate unknown timing offsets and cascaded channels for passive RISs, followed by a majorization-minimization optimization algorithm that effectively eliminates inter-symbol interference (ISI).

What Problem Does This Paper Address?

Reconfigurable Intelligent Surfaces (RISs) are a cornerstone of next-generation wireless networks, acting as smart, passive mirrors that alter the phase of electromagnetic waves to optimize signal delivery. Deploying multiple distributed RISs can significantly boost network reliability and coverage, especially for high-frequency bands (like mmWave) that suffer from severe path loss and blockages.

However, existing literature frequently relies on an unrealistic assumption: perfect timing synchronization among all distributed RISs. In practice, because RISs are passive devices lacking active radio-frequency (RF) chains and signal processing capabilities, they cannot measure or correct timing delays locally. Signals traveling through different RIS paths arrive at the destination asynchronously due to hardware inconsistencies and varying propagation distances. This time misalignment causes time dispersion and severe inter-symbol interference (ISI), threatening to completely erase the performance gains promised by distributed RIS architectures.

Methods

The authors tackle this challenge by breaking the solution into two main phases: a training phase for joint estimation and a data transmission phase for cooperative resynchronization.

  1. Joint Timing and Channel Estimation: Because individual hop channels (Source $\rightarrow$ RIS and RIS $\rightarrow$ Destination) cannot be isolated directly due to the passive nature of the RIS, the authors reformulate the system model to estimate the cascaded channels and overall timing offsets jointly. They derive a Maximum Likelihood Estimator (MLE) and employ an alternating projection technique to reduce a complex multi-dimensional search into a series of low-complexity 1-D minimization problems.
  2. Cramér-Rao Lower Bound (CRLB) Analysis: To evaluate the estimator's accuracy, the authors derive closed-form expressions for the CRLB, providing a theoretical benchmark for the variance of any unbiased estimator under this setup.
  3. Cooperative Resynchronization Design: Utilizing the estimates and their statistical error bounds, the authors jointly optimize the RIS reflection matrices and a destination-side timing offset equalizer to minimize the system's Mean-Squared Error (MSE). This non-convex problem features a fourth-order polynomial objective function and strict unit-modulus constraints. The authors solve it using a Majorization-Minimization (MM) framework, which yields semi-closed and closed-form solutions. They also introduce an accelerated scheme based on the SQUAREM method to speed up convergence.

The overall system architecture, including the destination receiver block diagram and the equivalent circuit of the passive RIS elements, is illustrated below:

System model for a multiple-RIS-assisted system, detailing the receiver block diagram and the hardware architecture of the passive RIS.

Datasets

Not discussed in the paper. The evaluation relies entirely on simulated wireless environments, including Rayleigh fading channels and sparse mmWave channels generated via the extended Saleh-Valenzuela geometric model.

Key Insights and Ideas

  • Embracing the Cascade: Trying to separate the timing offsets or channel gains of individual hops for a passive device is mathematically intractable. Treating them as a combined "cascaded" parameter allows standard estimation theory to apply cleanly.
  • Unit-Modulus over On/Off Training: Traditional RIS channel estimation often relies on turning elements "on" and "off" sequentially. The authors show that a general unit-modulus reflection pattern (keeping all elements active) combined with white pilot sequences fully exploits the RIS beamforming gain during training, significantly boosting estimation accuracy.
  • Double Minorization: In the optimization phase, the objective function is minorized twice to handle the coupling effects between variables and the hardware-constrained unit-modulus reflection elements. This clever mathematical bounding makes an otherwise intractable non-convex problem solvable in closed forms.

Key Results

  • Bound Convergence: Simulation results demonstrate that the Normalized Mean-Squared Error (NMSE) of the proposed MLE tightly matches the theoretical CRLB in the high Signal-to-Noise Ratio (SNR) region for both Rayleigh and mmWave channels, proving the estimator's efficiency.
  • Mitigating Asynchronization: Under severe timing misalignment ($\Delta_k \le 0.3$), the proposed algorithm outperforms conventional designs that naively assume perfect synchronization by orders of magnitude.
  • Near-Ideal Performance: The proposed resynchronization algorithm achieves performance remarkably close to an ideal benchmark that assumes perfect channel and timing information are known a priori.
  • Algorithmic Speedup: The accelerated SQUAREM-based scheme (Algorithm 3) converges significantly faster and provides more accurate solutions than the standard MM approach (Algorithm 2).

Limitations and Future Work

  • Flat-Fading Assumption: The paper assumes a quasi-static flat-fading channel model. In highly frequency-selective wideband channels, timing offsets will interact with multi-path delays in a much more complex manner, which remains an open area for research.
  • Single-Antenna Nodes: The system model focuses on a single-antenna source and destination. Scaling this framework to Multi-Input Multi-Output (MIMO) configurations will introduce additional spatial-temporal coupling complexities that need to be addressed.

Summary updated

Abstract

To reap the promised gain achieved by distributed reconfigurable intelligent surfaces (RISs)-enhanced communications in a wireless network, timing synchronization among these metasurfaces is an essential prerequisite in practice. This paper proposes a unified framework for the joint estimation of the unknown timing offsets and the RIS channel parameters, as well as the design of cooperative reflection and synchronization algorithm for the distributed multiple-RIS communication. Considering that RIS is usually a passive device with limited capability of signal processing, the individual timing offset and channel gains of each hop of the RIS links cannot be directly estimated. To make the estimation tractable, we propose to estimate the cascaded channels and timing offsets jointly by deriving a maximum likelihood estimator. Furthermore, we theoretically characterize the Cramer-Rao lower bound (CRLB) to evaluate the accuracy of this estimator. By using the proposed estimator and the derived CRLBs, an efficient resynchronization algorithm is devised jointly at the RISs and the destination to compensate the multiple timing offsets. Based on the majorization-minimization framework, the proposed algorithm admits semi-closed and closed form solutions for the RIS reflection matrices and the timing offset equalizer, respectively. Simulation results verify that our theoretical analysis well matches the numerical tests and validate the effectiveness of the proposed resynchronization algorithm.
BibTeX
@misc{zhao2022cooperative,
  author = {Yaqiong Zhao and Wei Xu and Xiaohu You and Ning Wang and Huan Sun},
  title = {{Cooperative Reflection and Synchronization Design for Distributed Multiple-RIS Communications}},
  year = {2022},
  eprint = {2205.02426},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2205.02426},
}
Figure