Circular Holographic MIMO Beamforming for Integrated Data and Energy Multicast Systems

Qingxiao Huang, Yizhe Zhao, Jie Hu, Kun Yang, Yuguang Fang

Abstract

As the Internet of Things (IoT) expands, the need for efficient Integrated Data and Energy Multicast (IDEM) systems becomes critical. Holographic multiple-input multiple-output (H-MIMO) systems, leveraging metamaterial-based antennas, offer a low-complexity solution for high spatial diversity. This paper investigates beamforming design for circular H-MIMO systems to maximize the minimum data rate for users while satisfying energy harvesting requirements. We derive a closed-form near-field resolution function and prove the asymptotic spatial orthogonality of near-field channels for circular arrays. Based on these findings, we propose an alternating optimization (AO) framework with a novel scaling parameter to bridge the gap between ideal digital beamforming and hardware-constrained H-MIMO. Numerical results demonstrate that our proposed schemes achieve near-optimal performance with significantly reduced hardware complexity and computational overhead.

Introduction

The proliferation of IoT devices presents a dual challenge: delivering high-speed data while ensuring sustainable power without frequent battery replacements. IDEM systems address this by utilizing radio frequency (RF) signals for simultaneous communication and wireless energy transfer. Traditional massive MIMO systems, while effective, are often hindered by high hardware costs and power consumption.

Holographic MIMO (H-MIMO) emerges as a promising alternative, utilizing metamaterial-based "leaky-wave" antennas to achieve high-gain beamforming with fewer RF chains. Unlike traditional far-field models, H-MIMO often operates in the near-field region where signals behave as spherical waves. While linear and planar arrays have been extensively studied, circular arrays offer unique advantages, including $360^\circ$ coverage and consistent focusing performance across all angles. However, characterizing their spatial orthogonality in 3D space remains a significant challenge for efficient beamforming design.

System Architecture and Near-Field Theory

The proposed system utilizes a circular H-MIMO transmitter equipped with $N_t$ elements and a limited number of RF chains ($N_{RF}$). The architecture is designed to serve a mix of Data Users (DUs) and Energy Users (EUs) located in the near-field region.

Architecture of the circular H-MIMO transmitter for IDEM systems, showing the transition from digital precoding to the circular antenna array.

A core contribution of this work is the derivation of a closed-form resolution function for 3D space. We prove that as the number of antenna elements $N$ grows, the channels for different users become perfectly orthogonal. This "asymptotic spatial orthogonality" simplifies the beamforming design, allowing the system to treat multi-user interference as negligible in the limit. This property is particularly potent in the near-field, where high spatial resolution allows the transmitter to focus energy on specific points in space rather than just steering beams in specific directions.

Beamforming Design via Alternating Optimization

To maximize the minimum rate among DUs while meeting the energy requirements of EUs, we employ an Alternating Optimization (AO) approach. The challenge lies in the hardware constraints of H-MIMO, such as binary amplitude control (on/off) or Lorentzian-constrained phase shifts.

We introduce a novel equivalent scaling parameter ($a$) to address these constraints. This technique relaxes strict hardware requirements during the optimization phase and subsequently maps the results back to feasible hardware states. We evaluate three primary control modes:

  1. Amplitude-only: Adjusting signal strength per element.
  2. Binary amplitude: Utilizing simple on/off switching for antenna elements.
  3. Lorentzian-constrained phase: Modeling the specific phase-shift responses typical of metamaterial antennas.

By optimizing the digital precoder and the analog beamformer iteratively, the system can achieve high performance even with a single RF chain.

Near-Field Focusing and Performance

Numerical simulations at 30 GHz with an 800-element circular array validate our theoretical findings. The results confirm that circular arrays maintain sharp, consistent focusing performance regardless of the user's angular position, a significant advantage over linear arrays which suffer from beam "smearing" at wide angles.

Spatial focusing patterns in the x-y, x-z, and angular planes, demonstrating the high resolution and point-focusing capability of the circular H-MIMO system.

Key performance highlights include:

  • Hardware Efficiency: With the proposed scaling optimization, a system with just one RF chain can achieve data rates comparable to systems with six RF chains, drastically reducing costs.
  • Computational Speed: The "Amplitude Scaling" algorithm demonstrated a 280x speedup over traditional Successive Convex Approximation (SCA) benchmarks, completing in approximately 0.014 seconds compared to 4.04 seconds.
  • Convergence: The scaling method allows the system to reach maximum achievable rates significantly faster than unscaled alternatives.

Conclusion

This paper provides a robust framework for beamforming in circular H-MIMO IDEM systems. By exploiting asymptotic spatial orthogonality in the near-field and utilizing a scaling-based optimization strategy, we demonstrate that high-performance data and energy transfer can be achieved with low hardware and computational complexity. Future work will focus on addressing Channel State Information (CSI) acquisition overhead and adapting these sharp focal points for mobile user scenarios.

Summary updated

Abstract

Due to the innovative application of metamaterials, holographic multiple-input multiple-output (H-MIMO) is expected to achieve a higher spatial diversity gain with lower hardware complexity. Together with the aid of a circular antenna arrangement in H-MIMO, integrated data and energy multicast (IDEM) can fully exploit the near-field channel to realize wider range of energy focusing and higher achievable rate. In this paper, we focus on beamforming design and investigate the IDEM systems that maximize the minimum rate of data users (DUs) while meeting the energy harvesting requirements for energy users (EUs). Specifically, we first derive the closed-form near-field resolution function in 3D space and show the asymptotic spatial orthogonality of near-field channel for circular antenna arrays. Then, we design an asymptotically optimal fully-digital beamformer based on the spatial orthogonality. After that, we apply the alternating optimization to develop H-MIMO beamforming scheme, where the digital beamformer is given in closed form while the analog beamformers of three different control modes are obtained numerically, respectively. Scaling schemes are also investigated to further improve the IDEM performance. Numerical results verify the correctness of the resolution function and asymptotic orthogonality and demonstrate that the proposed beamforming schemes outperform benchmark schemes, with very low complexity.
BibTeX
@article{huang2026circular,
  author = {Qingxiao Huang and Yizhe Zhao and Jie Hu and Kun Yang and Yuguang Fang},
  title = {{Circular Holographic MIMO Beamforming for Integrated Data and Energy Multicast Systems}},
  journal = {IEEE Trans. Wireless Communications},
  year = {2026},
  doi = {10.1109/twc.2025.3620886},
}
Figure