Introduction
Deploying legged robots in dynamic real-world environments requires balancing three often-conflicting goals: agility, safety, and adaptivity. While a robot might be trained to run fast (agility) or avoid obstacles (safety), it often fails when physical conditions—such as floor friction or payload weight—change unexpectedly (adaptivity). For example, a high-speed policy might cause a robot to slip on a wet floor because it cannot perceive the change in friction. The Bridging Adaptivity and Safety (BAS) framework addresses this "trilemma" by integrating physical parameter estimation directly into a safety-aware control pipeline.
The BAS Framework
The BAS architecture builds upon the "Agile But Safe" (ABS) paradigm, introducing a layer of physical adaptivity. It consists of four integrated components:
- Agile Policy: A reinforcement learning (RL) policy optimized for high-speed goal-reaching.
- Recovery Policy: A robust policy designed to steer the robot away from imminent collisions or instability.
- Physical Parameter Estimator: This module analyzes proprioceptive history (e.g., joint velocities and angles) to explicitly estimate mass, friction, and Center-of-Mass (CoM) shifts.
- Reach-Avoid (RA) Value Network: Serving as a "safety guard," this network determines when to switch from the agile policy to the recovery policy. Crucially, the RA network is conditioned on the estimated physical parameters, allowing it to adjust safety margins dynamically (e.g., braking earlier when carrying a heavy load).
To ensure robustness, the authors employed Fusion Interpolation during training, mixing ground-truth physics with estimated values. Additionally, On-Policy Fine-Tuning was used to keep the estimator accurate even as the robot's behavior shifts between agile and recovery modes.
Experimental Results
The framework was validated using a Unitree Go1 quadruped robot in both simulation (IsaacGym) and real-world scenarios. Testing environments included slippery floors, rough carpets, slopes, and varying payloads up to 8kg.
Real-World Performance
In real-world "agility tests," BAS demonstrated a 19.8% increase in average speed compared to existing state-of-the-art methods. More importantly, it maintained high safety standards across diverse conditions.
While non-adaptive baselines like ABS saw success rates drop to 34.38% in these challenging environments, BAS maintained an 81.25% success rate. The explicit estimation of physical parameters allowed the safety guard to trigger recovery maneuvers appropriately for the current dynamics, such as navigating slippery surfaces that would otherwise cause a crash.
Conclusion and Future Work
The BAS framework successfully bridges the gap between agility and safety by incorporating real-time physical adaptivity. By conditioning safety networks on estimated dynamics, robots can remain aggressive when safe and cautious when necessary. Future research will focus on integrating 3D vision for more complex obstacle detection and handling highly dynamic environments.
Summary updated