Abstract
The introduction of fully-actuated multirotors has opened the door to new possibilities and more efficient solutions to many real-world applications. However, their integration had been slower than expected, partly due to the need for new tools to take full advantage of these robots. We propose a way of bridging the gap between the tools already available for underactuated robots and the new fully-actuated vehicles. The approach can extend the existing underactuated flight controllers to support the fully-actuated robots, or enhance the existing fully-actuated controllers to support existing underactuated flight stacks. We introduce attitude strategies that work with the underactuated controllers, tools, planners and remote control interfaces, all while allowing taking advantage of the full actuation. Moreover, new methods are proposed that can properly handle the limited lateral thrust suffered by many fully-actuated UAV designs. The strategies are lightweight, simple, and allow rapid integration of the available tools with these new vehicles for the fast development of new real-world applications.
Introduction
Standard multirotors, such as typical quadcopters, are inherently underactuated. Their co-planar rotor configuration dictates that they must tilt their entire body to generate lateral or forward movement. This coupling of rotation and translation complicates tasks requiring precise orientation, such as vertical wall inspections or physical interactions with the environment.
Fully-actuated multirotors overcome these limitations by tilting their rotors, enabling independent control over all six degrees of freedom (6-DOF). Despite this advantage, adoption has been hindered by the lack of compatible software. Most flight stacks, planners, and pilot interfaces are designed for 4-DOF underactuated flight. This research proposes a modular framework to bridge this gap, allowing fully-actuated drones to utilize existing underactuated software ecosystems like the PX4 firmware.
Proposed Methodology
The core of the proposal is a modular extension to the standard flight controller architecture. By treating 6-DOF capabilities as an extension rather than a replacement, the framework maintains backward compatibility with existing high-level tools.
The framework introduces two primary components:
- Attitude Setpoint Generator: This module translates standard 4-DOF inputs (position and yaw) into 6-DOF commands using specific "attitude strategies." These include Zero-Tilt (maintaining a level body), Full-Tilt (mimicking underactuated flight for efficiency), Minimum-Tilt (prioritizing lateral thrust), Fixed-Tilt, and Fixed-Attitude.
- Thrust Setpoint Generator: Designed for Laterally Bounded Force (LBF) vehicles, this module manages hardware limits. It ensures that if lateral thrust limits are reached, the controller prioritizes critical components like vertical thrust to maintain altitude stability.
Experimental Results
The methodology was validated through extensive simulation in MATLAB and Gazebo (PX4 SITL), as well as real-world flight tests using a custom-built hexarotor with 30-degree tilted rotors.
Key findings include:
- Seamless Integration: The modified PX4 firmware successfully supported 6-DOF flight while retaining compatibility with standard RC transmitters and planners.
- Operational Versatility: Simulations confirmed the drone's ability to follow identical paths using vastly different body orientations based on the selected attitude strategy.
- Real-World Robustness: Outdoor experiments demonstrated that the "Zero-Tilt" strategy effectively rejected external disturbances, allowing the drone to maintain a level orientation even during aggressive maneuvers and wall contact.
Conclusion
This work provides a practical "bridge" for the robotics community, enabling the immediate use of fully-actuated multirotors with mature software stacks. While fully-actuated designs face challenges in energy efficiency and mechanical complexity, the proposed strategies allow researchers to focus on application development rather than low-level software infrastructure. Future work will explore 6-DOF-native planners that can dynamically switch strategies to optimize performance mid-flight.
Summary updated