Abstract
The introduction of fully-actuated multirotors has opened the door to new possibilities and more efficient solutions to many real-world applications. However, their integration had been slower than expected, partly due to the need for new tools to take full advantage of these robots. As far as we know, all the groups currently working on the fully-actuated multirotors develop new full-pose (6-D) tools and methods to use their robots, which is inefficient, time-consuming, and requires many resources. We propose methods that extend the existing flight controllers to support the new fully-actuated robots and bridge the gap between the tools already available for underactuated robots and the new fully-actuated vehicles. We introduce attitude strategies that work with the underactuated planners, controllers, tools, and remote control interfaces, all while allowing taking advantage of the full actuation. Moreover, new methods are proposed that can properly handle the limited lateral thrust suffered by many fully-actuated UAV designs. The strategies are lightweight, simple, and allow rapid integration of the available tools with these new vehicles for the fast development of new real-world applications. The source code of the PX4 firmware enhanced with the proposed methods and its simulator with our fully-actuated hexarotor model are provided with this paper.
Introduction
Standard multirotors are inherently underactuated; to generate horizontal force, they must tilt their entire body. This coupling between orientation and translation limits their effectiveness in specialized tasks, such as contact-based inspection or maintaining a stable sensor platform during aggressive maneuvers. Fully-actuated multirotors overcome this by decoupling rotation from translation, enabling 6 Degrees of Freedom (6-DOF) movement.
Despite their potential, the transition to fully-actuated platforms has been slow. Most existing software ecosystems—including flight stacks like PX4, path planners, and remote control interfaces—are built around a 4-DOF paradigm (x, y, z, and yaw). Transitioning to 6-DOF typically requires a complete and resource-intensive overhaul of these tools. Furthermore, many fully-actuated designs are "Laterally Bounded Force" (LBF) vehicles, possessing significantly less thrust capacity horizontally than vertically, which can lead to instability if not managed correctly.
Proposed Control Strategies
This research introduces a "bridge" approach, extending standard 4-DOF flight controllers to support 6-DOF hardware without requiring a total software rewrite. The core of this approach lies in two modules: Attitude Setpoint Generation and Thrust Setpoint Generation.
Attitude Strategies
The authors propose five distinct strategies to map 4-DOF inputs to 6-DOF capabilities:
- Zero-Tilt: Maintains a perfectly level orientation, ideal for stable filming or surface interaction.
- Full-Tilt: Mimics underactuated flight for maximum energy efficiency.
- Minimum-Tilt: Prioritizes lateral thrust, only tilting when the required force exceeds lateral limits.
- Fixed-Tilt: Maintains a constant angle, useful for aerodynamic efficiency in steady winds.
- Fixed-Attitude: Keeps a specific roll/pitch for specialized tool or sensor orientations.
Thrust Management for LBF Vehicles
To handle the physical limits of lateral thrust in LBF vehicles, two methods are proposed:
- Altitude Priority: Ensures vertical thrust is maintained to prevent altitude loss, even if horizontal tracking is compromised.
- Direction Priority: Scales all thrust components proportionally to maintain the intended direction of acceleration.
Experimental Evaluation
The proposed methods were validated through a combination of MATLAB simulations, Gazebo with PX4 Software In The Loop (SITL), and real-world hardware tests. The hardware platform was a custom fixed-tilt hexarotor based on a Tarot T960 frame, with rotors tilted at $\pm 30^\circ$ to achieve full actuation.
Results and Discussion
The integration into the PX4 firmware (versions v1.10 and v1.11) was achieved with minimal overhead, demonstrating the feasibility of "upgrading" existing flight stacks.
In hardware experiments, the drone successfully performed unmodeled contact with a vertical surface using an ultrasonic sensor while maintaining a "Zero-Tilt" attitude. This capability is a significant advancement for infrastructure inspection tasks. Outdoor tests in gusty conditions further proved the robustness of the "Zero-Tilt" and "Fixed-Tilt" strategies in rejecting disturbances while maintaining precise orientation.
Conclusion
By bridging the gap between 4-DOF software and 6-DOF hardware, these strategies provide a "fast-track" for the adoption of fully-actuated multirotors. The lightweight nature of the proposed methods allows researchers to leverage existing, robust flight stacks while unlocking the unique benefits of full actuation. Future work will explore more complex interaction tasks and detailed energy efficiency analyses across the different attitude strategies.
Summary updated