A Cooperative Contactless Object Transport with Acoustic Robots

Narsimlu Kemsaram, Akın Delibaşı, James Hardwick, Bonot Gautam, Diego Martínez Plasencia, Sriram Subramanian

Abstract

Cooperative transport, the simultaneous movement of an object by multiple agents, has been widely observed in biological systems such as ant colonies, which improve efficiency and adaptability in dynamic environments. Inspired by these natural phenomena, we present a novel acoustic robotic system for the transport of contactless objects in mid-air. Our system leverages phased ultrasonic transducers and a robotic control system onboard to generate localized acoustic pressure fields, enabling precise manipulation of airborne particles and robots. We categorize contactless object-transport strategies into independent transport (uncoordinated) and forward-facing cooperative transport (coordinated), drawing parallels with biological systems to optimize efficiency and robustness. The proposed system is experimentally validated by evaluating levitation stability using a microphone in the measurement lab, transport efficiency through a phase-space motion capture system, and clock synchronization accuracy via an oscilloscope. The results demonstrate the feasibility of both independent and cooperative airborne object transport. This research contributes to the field of acoustophoretic robotics, with potential applications in contactless material handling, micro-assembly, and biomedical applications.

Introduction

In swarm robotics, cooperative transport typically involves robots physically pushing, pulling, or caging an object. While effective, physical contact is not always ideal for fragile, sterile, or micro-scale objects. Acoustic levitation offers a solution by using sound waves to create "traps" that hold objects in mid-air without contact. However, most existing acoustic systems are static and fixed in place.

This research bridges the gap between swarm robotics and acoustic levitation by introducing mobile "acoustic robots." Inspired by the cooperative transport strategies seen in ant colonies, we developed a system capable of both independent and coordinated contactless transport, allowing robots to carry objects while moving through an environment.

Conceptual overview of independent (A, C, E) and cooperative (B, D, F) transport strategies in biological and robotic systems.

System Design and Methodology

The authors developed custom acoustic robots using the Mona mobile robot platform, equipped with an 8x8 ultrasonic phased array (Phased Array Transducer or PAT) operating at 40 kHz. Each robot is self-contained with an onboard battery and an FPGA for high-speed signal processing.

Transport Strategies

Two distinct strategies were implemented to move objects:

  1. Independent Transport: A single robot uses a single-sided acoustic field (a vortex trap) to levitate and move a particle.
  2. Cooperative Transport: Two robots face each other and move in a leader-follower formation. They generate a joint standing wave to trap the object between them, mimicking the "forward-facing" coordination of army ants.

Technical Challenges: Synchronization and Control

The core technical challenge is maintaining a stable acoustic trap between two moving, independent robots. This requires microsecond-level synchronization of the acoustic phases. Standard wireless protocols like Wi-Fi (ESP-NOW) were found to have millisecond-level latency, which is too slow for acoustic physics. To solve this, the team built a custom synchronization system using FPGAs and Infrared (IR) communication, achieving a clock synchronization accuracy of 1.6 microseconds.

Hardware components of the cooperative robotic system, showing the integration of the Mona robot, PAT board, and battery holders.

To ensure the robots remain aligned, a leader-follower PID control loop was implemented using odometry and external motion capture data. Additionally, passive neodymium magnets are used to physically dock the robots' frames, ensuring the phased arrays remain perfectly parallel during cooperative transport.

Key Results

The system was validated through several physical experiments:

  • Levitation Stability: The cooperative face-to-face setup measured a focal point pressure of 5675.5 Pascals, nearly double the 2956.8 Pascals generated by the independent single-sided setup. This increased pressure allows the swarm to carry larger and heavier particles.
  • Transport Efficiency: A single robot successfully transported a 1 mm radius expanded polystyrene (EPS) particle at 5 cm/s. The cooperative two-robot setup successfully transported a larger 2 mm radius EPS particle at the same speed with minimal oscillation.
  • Synchronization Accuracy: The IR-based FPGA system achieved a massive improvement in timing, reducing error from 7.8 milliseconds (Wi-Fi) to just 1.6 microseconds.

Discussion and Future Work

This work demonstrates that biological swarm strategies are highly adaptable to the strict physical constraints of acoustophoretic robotics. By moving from single-agent to multi-agent systems, the researchers significantly boosted the strength and stability of the acoustic traps.

Current limitations include the weight of the phased array hardware, which affects robot maneuverability at low speeds, and the strength of the magnetic docking mechanism, which currently prevents autonomous undocking. Future work will explore multi-particle transportation and real-world applications in sterile material handling, microfluidics, and micro-assembly.

Summary updated

Abstract

Cooperative transport, the simultaneous movement of an object by multiple agents, has been widely observed in biological systems such as ant colonies, which improve efficiency and adaptability in dynamic environments. Inspired by these natural phenomena, we present a novel acoustic robotic system for the transport of contactless objects in mid-air. Our system utilizes onboard phased ultrasonic transducers and a robotic control system to generate localized acoustic pressure fields, enabling the precise manipulation of airborne particles and robots. We categorize contactless object-transport strategies into independent transport (uncoordinated) and forward-facing cooperative transport (coordinated), drawing parallels with biological systems to optimize efficiency and robustness. The proposed system is experimentally validated by evaluating levitation stability using a microphone in the measurements lab, transport efficiency through a phase-space motion capture system, and clock synchronization accuracy using an oscilloscope. The results demonstrate the feasibility of both independent and cooperative airborne object transport. This research contributes to the field of acoustophoretic robotics, with potential applications in contactless material handling, microassembly, and biomedical applications.
BibTeX
@misc{kemsaram2025cooperative,
  author = {Narsimlu Kemsaram and Akın Delibaşı and James Hardwick and Bonot Gautam and Diego Martínez Plasencia and Sriram Subramanian},
  title = {{A Cooperative Contactless Object Transport with Acoustic Robots}},
  year = {2025},
  eprint = {2506.13957},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2506.13957},
  howpublished = {arXiv},
}
Figure