Cooperative Transportation by Mutual Handling of Two Autonomous Mobile Robots.

Hajime Asama, Masatoshi Sato, Nobuyuki Goto, Hayato Kaetsu, Akihiro Matsumoto, Isao EndoJournal of the Robotics Society of Japan 1997 · DOI

Abstract

This paper introduces "mutual handling," a cooperative strategy where autonomous robots manipulate each other to overcome physical obstacles. By using synchronized forklift mechanisms, two small omni-directional robots can successfully climb steps that are impossible for a single unit to navigate alone. The study details the hardware design, the "push-down" cooperative strategy, and experimental validation on a 120mm vertical step.

The Challenge of Environmental Constraints

In mobile robotics, a robot's capability is often strictly limited by its physical dimensions. A small robot, while agile and cost-effective, is easily defeated by environmental constraints like high curbs, deep grooves, or large steps. While building larger robots is one solution, it is not always practical or efficient. This research proposes Cooperation as an alternative: a multi-robot system achieving "advanced functionality"—tasks that are physically impossible for a single agent—by treating fellow robots as objects to be handled and supported.

Methods: The Mutual Handling Mechanism

The researchers developed a system based on two primary components: the mutual handling concept and specialized hardware.

Hardware Design

The system utilizes two identical autonomous mobile robots. Each is built on an omni-directional platform (3 Degrees of Freedom), allowing movement in any direction without changing orientation. Each robot is equipped with a custom-designed 1-DOF forklift.

The "Push-Down" Strategy

To overcome the weight limits of small motors, the robot being lifted (Robot A) does not remain passive. It uses its own forklift to push down against the floor or the step, effectively assisting the lifting robot (Robot B). This distributes the load and prevents the lifting robot from tipping over.

The cooperative "push-down" strategy allows the robots to lift loads exceeding individual motor capacities.

Control and Communication

The robots communicate via a wireless Radio LAN using a real-time OS. They follow a synchronized state machine: Robot B approaches and lifts Robot A onto the step; then they reposition, and Robot A assists Robot B in climbing.

Key Insights and Experimental Results

The most significant insight is the shift from passive payloads to active cooperation. By having the "passenger" robot actively push against the ground, the required lifting force from the "carrier" is significantly reduced. This allows small, lightweight motors to move loads that would normally be over their limit.

The sequence of mutual handling: from initial lift to cooperative push-down and movement.

The system successfully demonstrated two robots climbing a 120mm step. Given that the robots' wheels are only 200mm in diameter, this step represents a massive obstacle that no single robot could navigate. The experiment proved that wireless communication and dead-reckoning-based position control were sufficient to coordinate the complex "lift-push-move" sequence required for mutual handling.

Limitations and Future Outlook

While successful, the authors noted that "drift" in dead reckoning (internal position tracking) caused minor misalignments during the lifting process. Future iterations will incorporate external sensors like electronic compasses, ultrasonic sensors, or vision systems to correct these errors in real-time. Additionally, the researchers aim to scale the system to three or more robots and implement autonomous obstacle detection to allow the robots to characterize and overcome unknown environments without pre-programmed instructions.

Summary updated

Abstract

A new type of cooperation called mutual handling is introduced in this paper, which enables a multi-robot system to achieve an advanced functionality that cannot be realized by a single robot, and as an application of mutual handling, a method of cooperative transportation for two autonomous mobile robots to climb over a large step by operating each forklifts cooperatively is proposed, which cannot be overcome by a single robot. Then, a forklift mechanism for mutual handling is designed, and two autonomous mobile robots equipped with the forklifts are developed. Finally, a cooperative transportation method in which two autonomous mobile robots are controlled based on communication is presented, and the step-climbing motion by cooperative transportation is proved feasible by showing the experimental results using the developed omni-directional mobile robots.
BibTeX
@article{asama1997cooperative,
  author = {Hajime Asama and Masatoshi Sato and Nobuyuki Goto and Hayato Kaetsu and Akihiro Matsumoto and Isao Endo},
  title = {{Cooperative Transportation by Mutual Handling of Two Autonomous Mobile Robots.}},
  journal = {Journal of the Robotics Society of Japan},
  year = {1997},
  doi = {10.7210/jrsj.15.1043},
}
Figure