Abstract
This paper presents an output capacitor-less low-dropout regulator (LDO) with a bias switching scheme for biomedical applications with dual-range load currents. Power optimization is crucial for systems with multiple activation modes such as neural interfaces, IoT and edge devices with varying load currents. To enable rapid switching between low and high current states, a flipped voltage follower (FVF) configuration is utilized, along with a super source follower buffer to drive the power transistor. Two feedback loops and an on-chip compensation capacitor $C_C$ maintain the stability of the regulator under various load conditions. The LDO was implemented in a 65nm CMOS process with 1.5V input and 1.2V output voltages. The measured quiescent current is as low as 3µA and 50µA for the 0-500µA and 5-15mA load current ranges, respectively. An undershoot voltage of 100mV is observed when the load current switches from 0 to 15mA within 80ns, with a maximum current efficiency of 99.98%. Our design achieved a low Figure-of-Merit of 0.21ps, outperforming state-of-the-art analog LDOs.
Introduction
In biomedical applications like neural interfaces, power demand is highly dynamic. Devices often alternate between low-power recording modes and high-power stimulation bursts. Standard analog Low-Dropout (LDO) regulators struggle with this "Goldilocks" problem: tuning for low power results in slow transient responses, while high-performance tuning wastes quiescent current. Furthermore, the requirement for large off-chip capacitors is a significant barrier to miniaturization in implantable devices. This work introduces a capacitor-less analog LDO that utilizes a dual-range biasing scheme to achieve high efficiency and rapid response.
Proposed Architecture
The LDO is implemented in a 65nm CMOS process and features a novel architecture designed for both efficiency and speed. The core of the design is a Flipped Voltage Follower (FVF) topology, which enables high-speed regulation without large external capacitors.
Key architectural features include:
- Dual-Range Bias Switching: A control block detects load demand and switches between a "Low Mode" (3µA quiescent current) and a "High Mode" (50-110µA) to provide necessary drive.
- Super Source Follower Buffer: This specialized buffer drives the large power transistor, pushing parasitic poles to higher frequencies and enabling a faster transient response.
- Dual Feedback Loops: Loop 2 provides high DC gain for accuracy, while Loop 1 is a high-bandwidth loop optimized for fast transients.
- On-Chip Compensation: Integration of a 40pF compensation capacitor ($C_C$) and a 160pF load capacitor ($C_{LOAD}$) directly on-chip eliminates bulky external components.
Experimental Results
The fabricated chip converts a 1.5V input to a stable 1.2V output. The design achieves a record-breaking Figure-of-Merit (FOM) of 0.21 ps, significantly lower than recent state-of-the-art works (typically 0.88–3.9 ps).
Performance highlights include:
- Quiescent Current: 3µA in low-power mode, scaling to ~50µA under high load.
- Transient Performance: For a load current step from 0 to 15mA in 80ns, the output voltage undershoot is limited to 100mV with a recovery time under 500ns.
- Efficiency and Rejection: The regulator achieves a maximum current efficiency of 99.98% and maintains Power Supply Rejection (PSR) better than 40dB up to 10kHz.
Conclusion
By linking internal bias current to load demand and utilizing a dual-loop FVF architecture, this LDO achieves exceptional power efficiency and transient performance. While the use of on-chip MIM capacitors increases the active area to $0.165 mm^2$, the design provides a robust power management solution for space-constrained, power-sensitive biomedical implants. Future work will focus on integrating this LDO into full neural stimulator SoCs and exploring more area-efficient capacitor structures.
Summary updated