Abstract
The emerging joint sensing and communication (JSC) technology is expected to support new applications and services, such as autonomous driving and extended reality (XR), in the future wireless communication systems. Pilot (or reference) signals in wireless communications usually have good passive detection performance, strong anti-noise capability and good auto-correlation characteristics, hence they bear the potential for applying in radar sensing. In this paper, we investigate how to apply the positioning reference signal (PRS) of the 5th generation (5G) mobile communications in radar sensing. This approach has the unique benefit of compatibility with the most advanced mobile communication system available so far. Thus, the PRS can be regarded as a sensing reference signal to simultaneously realize the functions of radar sensing, communication and positioning in a convenient manner. Firstly, we propose a PRS based radar sensing scheme and analyze its range and velocity estimation performance, based on which we propose a method that improves the accuracy of velocity estimation by using multiple frames. Furthermore, the Cramer-Rao lower bound (CRLB) of the range and velocity estimation for PRS based radar sensing and the CRLB of the range estimation for PRS based positioning are derived. Our analysis and simulation results demonstrate the feasibility and superiority of PRS over other pilot signals in radar sensing. Finally, some suggestions for the future 5G-Advanced and 6th generation (6G) frame structure design containing the sensing reference signal are derived based on our study.
Introduction
As the telecommunications industry pivots toward 5G-Advanced and 6G, the integration of radar-like sensing capabilities into mobile networks—known as Joint Sensing and Communication (JSC)—has become a priority. Future applications such as autonomous driving and Extended Reality (XR) require networks that can simultaneously transmit high-speed data and perceive the physical environment.
A significant challenge in JSC is the waveform design. While radar-centric waveforms like Linear Frequency Modulation (LFM) excel at sensing, they are inefficient for high-rate data communication. Conversely, communication-centric Orthogonal Frequency Division Multiplexing (OFDM) waveforms often lack the structured characteristics required for high-resolution radar. This research investigates the use of the existing 5G Positioning Reference Signal (PRS) as a "sensing reference signal," enabling high-performance radar sensing within standard 5G frameworks without requiring hardware modifications.
Methodology
The proposed sensing scheme treats reflected PRS echoes as radar signals. The technical pipeline involves using an Inverse Fast Fourier Transform (IFFT) across subcarriers to estimate target range and a Fast Fourier Transform (FFT) across symbols to estimate velocity.
To enhance resolution beyond the standard 5G grid, the authors introduce a Fractional Fourier Transform (FRFT) approach using a "fractional factor" ($m_a$). This allows for finer interpolation of the signal. Furthermore, to maintain communication efficiency, the researchers propose a multi-frame velocity estimation method that spreads sensing symbols across multiple 5G frames, reducing overhead in any single time slot.
The PRS signal is mapped to the time-frequency resource grid using a "comb" structure, where symbols occupy specific subcarriers at specific times.
As shown in Figure 5, different comb sizes (e.g., Comb-2, Comb-4, Comb-6, and Comb-12) allow for a trade-off between sensing density and communication throughput.
Results and Discussion
The study demonstrates that PRS is inherently superior for sensing compared to other 5G pilots like the Synchronization Signal (SS) or Demodulation Reference Signal (DMRS). This superiority stems from the use of long Gold sequences which possess ideal signal properties for radar.
As illustrated in Figure 3, the auto-correlation function of the PRS exhibits a sharp, impulse-like peak at zero delay. This characteristic is critical for distinguishing targets and achieving high-precision range estimation.
Key findings from Monte Carlo simulations include:
- Centimeter-Level Accuracy: By applying the fractional factor ($m_a = 10$), the Root Mean Square Error (RMSE) for range estimation was reduced from 1.17 meters to 0.33 meters.
- Comb Performance: While denser structures like Comb-2 are more robust in low Signal-to-Noise Ratio (SNR) environments, sparser structures like Comb-4 provide a better balance for high-SNR scenarios, preserving more bandwidth for data.
- Multi-frame Efficiency: The multi-frame approach achieved a velocity resolution of 54 km/h with a sensing refresh time of just 0.03 seconds, proving its viability for real-time automotive tracking.
Conclusion
This research confirms that the 5G PRS can effectively serve as a dual-purpose signal for both positioning and radar sensing. By leveraging existing standards, network operators can implement sensing capabilities with minimal disruption. Future work will address the computational complexity of the FRFT and the challenges of sensing in highly dynamic environments where target velocities may change rapidly. The authors suggest that future 6G frame designs should incorporate dedicated "Sensing Subframes" to further optimize this joint functionality.
Summary updated