5G PRS-Based Sensing: A Sensing Reference Signal Approach for Joint Sensing and Communication System

Zhiqing Wei, Yuan Wang, Liang Ma, Shaoshi Yang, Zhiyong Feng, Chengkang Pan, Qixun Zhang, Yajuan Wang, Huici Wu, Ping Zhang

TL;DR

This paper proposes using the existing 5G Positioning Reference Signal (PRS) as a "sensing reference signal" to enable radar-like capabilities within standard mobile networks. By leveraging the unique properties of PRS, the researchers demonstrate that 5G base stations can achieve centimeter-level ranging accuracy and precise velocity estimation without requiring any modifications to the current 5G signal standard.

What Problem Does This Paper Address?

As we move toward 5G-Advanced and 6G, there is a growing need for Joint Sensing and Communication (JSC). Future applications like autonomous driving and Extended Reality (XR) require networks that can "see" the environment (radar sensing) while simultaneously transmitting massive amounts of data.

The challenge lies in the waveform. Radar-centric waveforms (like LFM) are great for sensing but terrible for data rates. Communication-centric waveforms (like OFDM) are great for data but often lack the structured characteristics needed for high-resolution radar. While researchers have looked at using communication "pilots" (reference signals) for sensing, most existing work uses non-standard signals or requires hardware changes. This paper asks: Can we use a signal already defined in the 5G standard to perform high-performance radar sensing?

Methods

The authors focus on the Positioning Reference Signal (PRS), originally designed for downlink positioning (finding a phone's location).

Key technical approaches include:

  • Signal Processing Pipeline: They treat the reflected PRS echo as a radar signal. They use an Inverse Fast Fourier Transform (IFFT) across subcarriers to estimate range and a Fast Fourier Transform (FFT) across symbols to estimate velocity.
  • Fractional Fourier Transform (FRFT): To overcome the resolution limits of the standard 5G grid, they introduce a "fractional factor" ($m_a$). This interpolates the signal to provide much finer estimation than the raw subcarrier spacing would normally allow.
  • Multi-Frame Velocity Estimation: High-resolution velocity estimation usually requires many consecutive symbols, which hogs network resources. The authors propose a method to spread these symbols across multiple 5G frames, reducing the "overhead" in any single frame while maintaining accuracy.
  • Theoretical Bounds: They derive the Cramér-Rao Lower Bound (CRLB) for PRS-based sensing, providing a mathematical "gold standard" to prove how close their method gets to the theoretical limit of accuracy.

Datasets

The paper does not use a real-world dataset. Instead, it utilizes Monte Carlo simulations based on the 3GPP TS 38.211 and 38.214 standards.

  • Parameters: They simulate a 24 GHz carrier frequency with 120 kHz subcarrier spacing (standard 5G NR FR2 parameters).
  • Comparison: They compare PRS performance against other 5G pilot signals, specifically the Synchronization Signal (SS) and the Demodulation Reference Signal (DMRS).

Key Insights and Ideas

  • PRS is Superior by Design: Unlike other pilots (SS or DMRS) that are sparse or short, PRS uses long Gold sequences with excellent auto-correlation properties. This makes it naturally "radar-like" and significantly more accurate for sensing than other 5G signals.
  • The "Comb" Advantage: PRS uses a "comb" structure (occupying every 2nd, 4th, 6th, or 12th subcarrier). The authors found that while a denser comb (Comb-2) is more robust in noisy environments, a sparser comb (Comb-4) allows for higher data throughput with only a slight hit to sensing performance in high-SNR scenarios.
  • The Range-Velocity Trade-off: The derived CRLB reveals a fundamental trade-off: decreasing the OFDM symbol duration improves range accuracy but degrades velocity accuracy. This insight allows engineers to tune 5G parameters based on whether they are tracking a fast-moving car or a slow-moving pedestrian.

Key Results

  • Centimeter Accuracy: By using the fractional factor ($m_a = 10$), the Root Mean Square Error (RMSE) for range estimation was reduced from 1.17 meters to just 0.33 meters, reaching centimeter-level precision.
  • Superiority over DMRS/SS: Simulations showed that PRS consistently maintains a lower RMSE than SS and DMRS across all Signal-to-Noise Ratio (SNR) levels.
  • Multi-frame Efficiency: The multi-frame approach achieved a velocity resolution of 54 km/h with a sensing refresh time of only 0.03 seconds, proving it is viable for real-time automotive tracking without crippling communication speeds.

Limitations and Future Work

  • Computational Complexity: While the Fractional Fourier Transform (FRFT) significantly improves accuracy, it increases the number of search steps and computational load on the base station.
  • Dynamic Environments: The current study assumes a constant velocity during the sensing period. In reality, vehicles accelerate and turn; future work needs to address how multi-frame sensing handles non-linear motion.
  • Hardware Realities: The paper is simulation-based. The authors suggest that the next step is validating these results with hardware-level verification in 5G-Advanced testbeds.
  • 6G Frame Design: The authors conclude by suggesting that 6G should include "Sensing Subframes" where these reference signals can be dynamically adjusted based on the environment's sensing demands.

Summary updated

Abstract

The emerging joint sensing and communication (JSC) technology is expected to support new applications and services, such as autonomous driving and extended reality (XR), in the future wireless communication systems. Pilot (or reference) signals in wireless communications usually have good passive detection performance, strong anti-noise capability and good auto-correlation characteristics, hence they bear the potential for applying in radar sensing. In this paper, we investigate how to apply the positioning reference signal (PRS) of the 5th generation (5G) mobile communications in radar sensing. This approach has the unique benefit of compatibility with the most advanced mobile communication system available so far. Thus, the PRS can be regarded as a sensing reference signal to simultaneously realize the functions of radar sensing, communication and positioning in a convenient manner. Firstly, we propose a PRS based radar sensing scheme and analyze its range and velocity estimation performance, based on which we propose a method that improves the accuracy of velocity estimation by using multiple frames. Furthermore, the Crámer-Rao lower bound (CRLB) of the range and velocity estimation for PRS based radar sensing and the CRLB of the range estimation for PRS based positioning are derived. Our analysis and simulation results demonstrate the feasibility and superiority of PRS over other pilot signals in radar sensing. Finally, some suggestions for the future 5G-Advanced (5G-A) and 6th generation (6G) frame structure design containing the sensing reference signal are derived based on our study.
BibTeX
@article{wei2023g,
  author = {Zhiqing Wei and Yuan Wang and Liang Ma and Shaoshi Yang and Zhiyong Feng and Chengkang Pan and Qixun Zhang and Yajuan Wang and Huici Wu and Ping Zhang},
  title = {{5G PRS-Based Sensing: A Sensing Reference Signal Approach for Joint Sensing and Communication System}},
  journal = {IEEE Trans. Vehicular Technology},
  year = {2023},
  doi = {10.1109/tvt.2022.3215159},
}

Loading related content...

Figure