Journal of Alloys and Compounds 2019

35 papers
In 2019, the Journal of Alloys and Compounds published research centered on materials for energy storage, structural composites, and electronic applications. A portion of the work focused on improving lithium-ion battery performance through the development of anode materials such as Fe3O4@C/rGO and Sb@S–N–C nanocomposites. Research also explored hydrogen storage solutions, specifically examining the catalytic effects of anatase TiO2 on MgH2. Beyond energy applications, the journal featured studies on the mechanical behavior of fiber-reinforced aluminum composites and the development of toughened Ti-based carbide cermets. Electronic and magnetic properties were also investigated, including multiferroic modulation in BiFeO3 ceramics and the formation of low-temperature Ohmic contacts on 4H-SiC. Prolific contributors during this period included researchers such as Hui Qi, Jianfeng Huang, and Jiayin Li. The year's output reflected a focus on the synthesis and characterization of complex alloy systems and functional ceramics for industrial and technological use.

Top Research Directions

The 5 research directions with Journal of Alloys and Compounds 2019 papers, ranked by paper count, next to 2018. Share is the fraction of the edition’s papers in the direction.

#Direction20192018Share 2019Share 20182018 rank
1Mapping Chemical Mechanisms with Density Functional Theory102.9%0.0%—
2Multi-Scale Hybridization for Synergistic Material Enhancement102.9%0.0%—
3Operando Spectroscopy for Dynamic Chemical Interfaces102.9%0.0%—
4The Scalability Bottleneck in Nanostructured Material Synthesis102.9%0.0%—
5Thermodynamic and Kinetic Engineering of Hydrogen Storage Materials102.9%0.0%—

Download all directions as CSV

Institutions

Institutions credited by Journal of Alloys and Compounds 2019 papers: a paper credits every institution named in its affiliations, once. 19 institutions share 1 credited papers.

#InstitutionPapersShare20182018 rank
100a7vgh58 1100.0%0—
202jqtg033 1100.0%0—
304c3cen15 1100.0%0—
4Aarhus University 1100.0%0—
5Ben-Gurion University of the Negev 1100.0%0—
6Centre National de la Recherche Scientifique 1100.0%0—
7Curtin University 1100.0%0—
8Griffith University 1100.0%0—
9Kyushu University 1100.0%0—
10Max Planck Institute for Chemistry 1100.0%0—
11Paris-Est Sup 1100.0%0—
12South China University of Technology 1100.0%0—
13Technion – Israel Institute of Technology 1100.0%0—
14Universidad Autónoma de Madrid 1100.0%0—
15University of Bologna 1100.0%0—
16University of Nottingham 1100.0%0—
17University of the Western Cape 1100.0%0—
18University of Turin 1100.0%0—
19Utrecht University 1100.0%0—

Download all institutions as CSV

About this data

Papers. Journal of Alloys and Compounds 2019 lists 35 papers on Lacuna, duplicate versions counted once; rejected and withdrawn submissions are left out.

Directions. Directions are Lacuna’s clustering of the concept elements extracted from each paper, so a paper can belong to several and direction counts add up to more than the paper count. A direction’s share is its papers divided by the edition’s papers. Comparisons with 2018 use shares, since the edition went from 25 to 35 papers.

Institutions. A paper credits each institution named in its affiliations, resolved to a ROR record, once. 1 of 35 papers (2.9%) credit at least one institution and are the base for institution shares; the rest have no resolved affiliation yet.

Data. Counts come from Lacuna’s data build of 2026-11-19 and change as papers are added. Tables as CSV: directions · institutions. Cite as: Lacuna, “Journal of Alloys and Compounds 2019”, https://lacuna.tiptreesystems.com/venue/journal-of-alloys-and-compounds/2019.

Top Authors

AuthorPapers
Chenfei Gu1
Junbin Liu1
Ruixuan Li1

Impactful Papers

Papers from Journal of Alloys and Compounds 2019 that shaped research clusters.

Influential

Papers

Title
An embedded heterostructure Fe2O3@α-FeOOH/RGO with optimized SEI film and fast Li-ion diffusion
A novel N-doped organic porous carbon derive from water-based alkyd resin for lithium ion battery anode materials
Bi0 nanoparticle loaded on Bi3+-doped ZnWO4 nanorods with oxygen vacancies for enhanced photocatalytic NO removal
Combined experimental and theoretical investigation on modulation of multiferroic properties in BiFeO3 ceramics induced by Dy and transition metals co-doping
Corrigendum to “On the atomic model of Guinier-Preston zones in Al-Mg-Si-Cu alloys” [J. Alloys Compd. 745 (2018) 644–650]
Crystal-facet-dependent catalysis of anatase TiO2 on hydrogen storage of MgH2
Design and controllable synthesis of core-shell nanostructured Ni-P particles with an ionothermal strategy
Ductility enhancement of tungsten after plastic deformation
Effect of rGO supported NiCu derived from layered double hydroxide on hydrogen sorption kinetics of MgH2
Enhanced dielectric and piezoelectric properties of RF sputtered Pb(Zr0.60,Ti0.40)O3 thin films deposited on sol-gel derived Pb1+x(Zr0.40,Ti0.60)O3 seed layer with various lead contents
Enhanced interface charge transfer via n-n WO3/Ti–Fe2O3 heterojunction formation for water splitting
Experimental investigation of the Al–Co–Fe phase diagram over the whole composition range
Extremely toughened Ti-based solid-solution carbide cermets
Facile synthesis of three-dimensional interconnected porous carbon derived from potassium alginate for high performance supercapacitor
Fe nanoparticles and CNTs co-decorated porous carbon/graphene foam composite for excellent electromagnetic interference shielding performance
Full visible waveband tunable formamidinium halides hybrid perovskite QDs via anion-exchange route and their high luminous efficiency LEDs
Influences of sulfurization on performances of Cu(In,Ga)(Se,S)2 cells fabricated based on the method of sputtering CIGSe quaternary target
In situ fabrication of ZnO–MoO2/C hetero-phase nanocomposite derived from MOFs with enhanced performance for lithium storage
Investigation of high piezoelectric properties of KNNSb-Sr BNZ ceramics
Investigations of new bulk metallic glass alloys fabricated using a high-pressure die-casting method based on industrial grade Zr raw material
Lithium-ion conductive coating layer on nickel rich layered oxide cathode material with improved electrochemical properties for Li-ion battery
Low-temperature preparation of HTM-free SnO2-based planar heterojunction perovskite solar cells with commercial carbon as counter electrode
Materials for hydrogen-based energy storage – past, recent progress and future outlook
Micromechanics analysis on the microscopic damage mechanism and mechanical behavior of graphite fiber-reinforced aluminum composites under transverse tension loading
Nitrogen-containing porous carbon/α-MnO2 nanowires composite electrode towards supercapacitor applications
Ohmic contacts simultaneously formed on n-type and p-type 4H-SiC at low temperature
Preparation of novel reticulated porous ceramics with hierarchical pore structures
Preparing LaMnO3 nanocrystals on surface graphitized micro-diamond for efficient oxygen reduction
Rice crust-like Fe3O4@C/rGO with improved extrinsic pseudocapacitance for high-rate and long-life Li-ion anodes
Sb@S–N–C nanocomposite as long-cycle stable anode material for lithium ion batteries
Shaddock peels as bio-templates synthesis of Cd-doped SnO2 nanofibers: A high performance formaldehyde sensing material
Significantly enhancing the strength + ductility combination of Mg-9Al alloy using multi-walled carbon nanotubes
Significantly enhancing the strength + ductility combination of Mg-9Al alloy using multi-walled carbon nanotubes
Synthesis of hierarchical porous Co(OH)2/Ni2Mn1Ox composites on Ni foam for high performance battery-supercapacitor hybrid devices
Tailoring the micromorphology of the as-cast Mg–Sn–In alloys to corrosion-resistant microstructures via adjusting In concentration