ACM Trans. Design Autom. Electr. Syst 2017

17 papers

Top Research Directions

The 5 research directions with ACM Trans. Design Autom. Electr. Syst 2017 papers, ranked by paper count, next to 2016. Share is the fraction of the edition’s papers in the direction.

#Direction20172016Share 2017Share 20162016 rank
1From Fractional Solutions to Discrete Decisions105.9%0.0%—
2Path Based Timing Optimization in Digital Circuits105.9%0.0%—
3Probabilistic Worst-Case Execution Time Estimation105.9%0.0%—
4Scaling Mixed Integer Linear Programming for Large Networks105.9%0.0%—
5Semidefinite Relaxation for Non-Convex Engineering Optimization105.9%0.0%—

Download all directions as CSV

Institutions

Institutions credited by ACM Trans. Design Autom. Electr. Syst 2017 papers: a paper credits every institution named in its affiliations, once. 10 institutions share 4 credited papers.

#InstitutionPapersShare
103jd48p79 125.0%
2Aalto University 125.0%
3Artificial Intelligence Research Institute 125.0%
4Chinese University of Hong Kong 125.0%
5Consejo Superior de Investigaciones Científicas 125.0%
6Indian Institute of Technology Kharagpur 125.0%
7Technical University of Munich 125.0%
8The University of Texas at Austin 125.0%
9Universitat Autònoma de Barcelona 125.0%
10University of Warwick 125.0%

Download all institutions as CSV

About this data

Papers. ACM Trans. Design Autom. Electr. Syst 2017 lists 17 papers on Lacuna, duplicate versions counted once; rejected and withdrawn submissions are left out.

Directions. Directions are Lacuna’s clustering of the concept elements extracted from each paper, so a paper can belong to several and direction counts add up to more than the paper count. A direction’s share is its papers divided by the edition’s papers. Comparisons with 2016 use shares, since the edition went from 30 to 17 papers.

Institutions. A paper credits each institution named in its affiliations, resolved to a ROR record, once. 4 of 17 papers (23.5%) credit at least one institution and are the base for institution shares; the rest have no resolved affiliation yet.

Data. Counts come from Lacuna’s data build of 2026-11-19 and change as papers are added. Tables as CSV: directions · institutions. Cite as: Lacuna, “ACM Trans. Design Autom. Electr. Syst 2017”, https://lacuna.tiptreesystems.com/venue/acm-trans-design-autom-electr-syst/2017.

Top Authors

AuthorPapers
Ji Li2
Andrew Paverd1
Bei Yu1
David Z. Pan1
Debdeep Mukhopadhyay1
Francisco J. Cazorla1
Jun Yang1
Lizhong Chen1
Lu Peng1
Mingsong Chen1
Paul Bogdan1
Peng Li1
Sebastian Steinhorst1
Shahin Nazarian1
Vinita Vasudevan1
Xianwei Zhang1
Xin Fu1
Youtao Zhang1
Zonghua Gu1

Impactful Papers

Papers from ACM Trans. Design Autom. Electr. Syst 2017 that shaped research clusters.

Influential

Papers

Title
Accelerated Soft-Error-Rate (SER) Estimation for Combinational and Sequential Circuits
A Hierarchical Technique for Statistical Path Selection and Criticality Computation
An Effective Layout Decomposition Method for DSA with Multiple Patterning in Contact-Hole Generation
A Single-Tier Virtual Queuing Memory Controller Architecture for Heterogeneous MPSoCs
CALM: Contention-Aware Latency-Minimal Application Mapping for Flattened Butterfly On-Chip Networks
Exploring Energy-Efficient Cache Design in Emerging Mobile Platforms
Fundamental Challenges Toward Making the IoT a Reachable Reality: A Model-Centric Investigation
Incremental Layer Assignment for Timing Optimization
Low-Power Clock Tree Synthesis for 3D-ICs
Measurement-Based Worst-Case Execution Time Estimation Using the Coefficient of Variation
Multiharmonic Small-Signal Modeling of Low-Power PWM DC-DC Converters.
On the Restore Time Variations of Future DRAM Memory
Optimized Implementation of Multirate Mixed-Criticality Synchronous Reactive Models
Security Analysis of Arbiter PUF and Its Lightweight Compositions Under Predictability Test
Security in Automotive Networks: Lightweight Authentication and Authorization
TEI-power: Temperature Effect Inversion-Aware Dynamic Thermal Management
Two-Stage Layout Decomposition for Hybrid E-Beam and Triple Patterning Lithography