Lignocellulosic biomass—such as wood, bamboo, and agricultural residues—is nature’s premier structural material. It owes its remarkable strength to a dense, cross-linked matrix where crystalline cellulose fibers are embedded in a protective wrapping of hemicellulose and a rigid, hydrophobic glue called lignin.
While this architecture makes plants resilient in nature, it presents a massive obstacle for biorefineries and material scientists. Breaking down this "lignocellulose fortress" to extract fermentable sugars or to engineer high-surface-area porous carbons typically requires brute-force methods: high temperatures, concentrated acids, or energy-intensive mechanical milling. However, these harsh single-step treatments often degrade the underlying carbohydrates and consume more energy than they salvage.
To overcome this, a powerful paradigm has emerged: sequential deconstruction and activation. Instead of smashing the biomass matrix in a single step, researchers use a coordinated two-step strategy. First, a mild priming phase selectively untangles or swells the matrix to expose its internal architecture. Second, an activation phase targets the newly exposed components with high precision. By pairing these steps synergistically, this approach achieves deep structural deconstruction under remarkably mild conditions.
The Priming Phase: Softening the Fortress
The goal of the priming phase is not to destroy the biomass, but to make its internal bonds physically accessible. This is achieved through either biological or mild chemical mechanisms.
Biological Priming via Microbial Networks
In nature, white-rot fungi have evolved specialized enzymatic toolkits to bypass the lignin shield. Researchers are leveraging these organisms to "pre-bore" pathways into biomass.
When biomass is incubated with fungi like Phanerochaete chrysosporium, the fungal hyphae physically penetrate the dense cell walls. As shown by Wen Kong et al. and Jian Zhang et al., this biological step selectively degrades a portion of the lignin, leaving behind a highly porous, interconnected channel network. Similarly, Jingxin Wang et al. demonstrated that pretreating industrial waste like brewer's grain with Aspergillus strains alters the surface chemistry and introduces initial porosity without relying on harsh chemicals.
This biological priming can even be extended to fossilized, highly recalcitrant organic matrices; Yichen Li et al. demonstrated that Phanerochaete chrysosporium successfully increases the porosity and biodegradability of lignite coal, priming it for subsequent microbial methane conversion.
Chemical Priming via Swelling and Selective Hydrolysis
Alternatively, mild chemical agents can be used to relax the matrix. Alkaline solutions (like NaOH) are highly effective at saponifying the ester bonds that tie hemicellulose to lignin. As detailed by Chunyan Zhang et al. and Saurabh Sudha Dhiman et al., this alkaline treatment causes the crystalline cellulose structure to swell, disrupting the tightly packed lignin-carbohydrate complex.
Other chemical priming strategies target specific fractions of the matrix. For instance, Wenjing Tang et al. and Chunyan Xu et al. utilized dilute phosphoric acid to selectively hydrolyze and remove hemicellulose from poplar wood, which destabilizes the matrix while preserving the lignin for secondary uses. On the other hand, Qian Li et al. employed deep eutectic solvents (DESs) to disrupt the rigid lignin-hemicellulose framework of peanut shells, unlocking previously buried active sites for environmental adsorption.
The Activation Phase: Targeted Deconstruction
Once the biomass matrix is primed and its internal surface area is exposed, the secondary activation step can proceed with unprecedented efficiency. Because the physical barriers have been lowered, the activating agents require far less energy or concentration to achieve deep deconstruction.
[Raw Biomass]
│
▼ (Step 1: Priming via Fungal Hyphae or Alkaline Swelling)
[Opened, Swollen Matrix]
│
▼ (Step 2: Activation via Ozone, Salts, or Enzymes)
[High-Yield Sugars] OR [Hierarchical Porous Carbon]
Sequential Alkaline-Oxidative Cleavage
The power of this synergy is perfectly illustrated by combining alkaline priming with oxidative ozone activation. Ozone is a powerful oxidant, but if applied directly to raw biomass, it reacts superficially and unevenly.
When Shuo Fang et al. and Chunyan Zhang et al. applied a sequential NaOH-ozone treatment to corn stover, the results were transformative. The initial NaOH step swelled the matrix, exposing the core lignin linkages. When ozone was introduced as the second step, it rapidly penetrated the open structure and cleaved the stubborn $\beta$-O-4 ether bonds, breaking the remaining lignin down into small, highly accessible fragments. This targeted deconstruction boosted downstream enzymatic cellulose conversion to an astonishing 91.73%.
A similar mass-transfer synergy was captured by Bo-Yu Chen et al., who paired a Fenton oxidation reaction with a mixed organic-aqueous solvent (DMSO/water). The mixed solvent allowed reactive hydroxyl radicals to penetrate deep into the lignocellulosic framework under mild thermal conditions, achieving a dual-stream triumph: recovering 94% of the carbohydrates as soluble sugars while simultaneously preserving 87% of the lignin as a clean solid residue.
Priming for Advanced Carbon Materials
When engineering porous carbons for supercapacitors or pollutant adsorbents, the priming phase dictates the final pore architecture. If raw biomass is carbonized and chemically activated in one step, the rapid escape of volatile gases often causes the microscopic structure to collapse, yielding a low surface area.
By introducing a biological priming step, Wen Kong et al. showed that white-rot fungi create a highly stable, porous framework. When an activating salt (like NaCl) is introduced in the second step, it distributes uniformly throughout the pre-existing fungal channels. During carbonization, this uniform distribution allows for the controlled development of micro- and mesopores, preventing structural collapse and yielding a superior hierarchical porous carbon.
Designing Functional Skeletons
The philosophy of sequential deconstruction does not always aim for the total breakdown of biomass. Instead, it can be tuned to selectively remove specific components, leaving behind a highly functional, natural skeleton.
Porous Cellulose Skeletonization
By carefully controlling the chemical removal of lignin and hemicellulose, researchers can transform rigid wood into flexible, high-performance electronics. Hongting Ma et al. utilized selective chemical deconstruction to strip the rigid matrix from balsa wood, leaving behind a flexible, porous cellulose skeleton. Because this process preserves the wood's original hierarchical, vertical channel architecture, the resulting skeleton acts as an exceptional highway for ion transport, forming the basis for flexible, anti-freezing supercapacitors.
Spatial Control and Biomimicry
Because chemical and biological agents diffuse through biomass over time, researchers can also achieve spatial control over deconstruction. Jingpeng Li et al. demonstrated this by performing selective surface delignification on bamboo. By restricting the deconstruction to the outer layers of the biomass, they exposed surface cellulose fibers for subsequent chemical cross-linking while keeping the internal core intact. This produced a tooth-mimetic composite with a superhard outer shell and a ultra-tough core, completely eliminating the need for petroleum-based protective coatings.
Why the Synergy Works: A Summary
The sequential deconstruction and activation paradigm works because it replaces a single, high-energy thermodynamic barrier with a series of low-energy, kinetically favorable steps.
- Mass Transfer Optimization: Priming steps (like fungal tunneling or solvent swelling) open physical pathways, allowing downstream chemicals, oxidants, or enzymes to flood the interior of the material rather than getting stuck on the surface.
- Bond Exposure: Relaxing the matrix exposes specific chemical bonds—such as $\beta$-O-4 ether bonds or amorphous cellulose regions—making them highly vulnerable to targeted secondary agents like ozone or cellulase enzymes.
- Structural Preservation: By avoiding harsh, all-at-once treatments, the valuable components of biomass (like crystalline cellulose skeletons or intact solid lignin) can be harvested cleanly, paving the way for high-yield biorefineries and advanced green materials.
Key Foundational Work
Understanding Multiscale Structural Changes During Dilute Acid Pretreatment of Switchgrass and Poplar (2016) — contributed 2 concept elements to this direction.
Usefulness of Freshwater Alga Water-net (Hydrodictyon reticulatum) as Resources for Production of Fermentable Sugars (2012) — contributed 1 concept elements to this direction.