Evaluation of Biological Pretreatment of Wormwood Rod Reies with White Rot Fungi for Preparation of Porous Carbon

Wen Kong, Shuhui Wang, Xinyu Zhang, Xiao Fu, Wanju ZhangJournal of Fungi 2022 · DOI

TL;DR

This paper presents a novel, environmentally friendly method for creating high-performance porous carbon materials from wormwood rod residues. By pretreating the biomass with white rot fungi and then activating it with NaCl, the researchers achieved a material with exceptional surface area and pore structure, leading to superior performance in supercapacitors and as an adsorbent for pollutants.

What Problem Does This Paper Address?

The disposal of Chinese medicinal herbal residues (CMHR) poses an environmental challenge, with current methods like landfilling and incineration being costly and polluting. Simultaneously, there's a growing demand for advanced porous carbon materials for applications in energy storage (supercapacitors) and environmental remediation (adsorbents). Traditional methods for producing these carbons often involve harsh chemicals and high energy consumption. This paper addresses the need for a sustainable, cost-effective, and environmentally benign approach to convert CMHR into high-value porous carbon materials with excellent performance characteristics.

Methods

The study employs a multi-step process to transform wormwood rod residues into porous carbon. The key steps include:

  • Fungal Pretreatment: Wormwood rod powder is incubated with the white rot fungus Physisporinus vitreus. This biological step is crucial for degrading the recalcitrant lignin and loosening the biomass structure, creating a more accessible substrate for subsequent processing.
  • Carbonization: The fungi-pretreated material is then carbonized in a tubular furnace under a nitrogen atmosphere at 700°C. This process converts the organic biomass into a carbonaceous structure.
  • NaCl Activation: Following carbonization, the material is mixed with NaCl and further pyrolyzed. The NaCl acts as a chemical activating agent, helping to create a more developed porous structure with a high surface area and pore volume.

The resulting porous carbon material is denoted as FWRA. For comparison, the researchers also prepared carbon from raw wormwood rod residues (WR) and fungi-pretreated but non-activated material (FWR).

Characterization techniques used include:

  • Scanning Electron Microscopy (SEM) for morphology.
  • X-ray Diffraction (XRD) and Raman Spectroscopy for structural analysis.
  • X-ray Photoelectron Spectroscopy (XPS) for chemical composition.
  • Nitrogen adsorption-desorption isotherms and porosimetry for surface area and pore size distribution analysis.
  • Electrochemical tests (CV, GCD, EIS) for supercapacitor performance evaluation.
  • UV-visible spectroscopy for adsorption capacity measurements.

Datasets

Not discussed in the paper. The study utilizes raw wormwood rod residues as the precursor material and does not rely on pre-existing datasets for training or evaluation.

Key Insights and Ideas

  • Biological Pretreatment is Key: The white rot fungi effectively break down the lignin in the wormwood, creating a more porous and accessible structure. This biological step is critical for enhancing the efficacy of subsequent chemical activation.
  • Synergy of Fungi and NaCl: The combination of fungal pretreatment and NaCl activation yields a superior porous carbon (FWRA) compared to either method alone or using raw biomass. The fungi loosen the structure, allowing NaCl to access and create more pores during activation.
  • Hierarchical Porosity: The FWRA material exhibits a hierarchical pore structure (micropores, mesopores, and macropores), which is highly beneficial for both ion transport in supercapacitors and diffusion of adsorbate molecules.
  • Value-Added from Waste: This research demonstrates a viable pathway to transform agricultural/herbal waste into high-value functional materials, aligning with circular economy principles.
  • Dual Functionality: The developed porous carbon shows excellent performance in two distinct applications: energy storage (supercapacitors) and environmental remediation (adsorption of methyl orange).

Key Results

  • High Surface Area and Pore Volume: The FWRA sample achieved a high specific surface area of 1165.7 m²/g and a large pore volume of 1.02 cm³/g.
  • Supercapacitor Performance:
    • High specific capacitance of 443.2 F/g at 0.5 A/g in 6 M KOH electrolyte.
  • Excellent rate capability, retaining 270 F/g at a high current density of 100 A/g.
  • Superb cyclic stability with only a 0.4% capacitance decay after 20,000 cycles at 5 A/g in 1 M Na₂SO₄ electrolyte.
  • Adsorption Performance:
    • Superior adsorption capacity for methyl orange (MO) of 260.8 mg/g, significantly higher than the untreated wormwood rod carbon.

Limitations and Future Work

  • Optimization of Fungi-Biomass Matching: The authors suggest that further investigation into the matching of different fungal species with various biomass types could lead to even better results.
  • Scalability: While the method is described as simple and environmentally friendly, the scalability of the fungal pretreatment step for industrial applications might require further study.
  • Mechanism of Pseudocapacitance: The paper notes the presence of pseudocapacitance in FWRA due to nitrogen and oxygen functional groups, suggesting further research into optimizing these groups for enhanced electrochemical performance.
  • Broader Pollutant Removal: While MO was used as a probe, exploring the adsorption capabilities of FWRA for a wider range of organic pollutants would be beneficial.

Summary updated

Abstract

In this work, the wormwood rod residues are pretreated with white rot fungi as the precursor to preparing porous carbon following a simple carbonization and activation process (denoted herein as FWRA sample). The FWRA sample possesses abundant hierarchical pores structure with high specific surface area (1165.7 m<sup>2</sup> g<sup>-1</sup>) and large pore volume (1.02 cm<sup>3</sup> g<sup>-1</sup>). As an electrode for supercapacitors, the FWRA sample offers a high specific capacitance of 443.2 F g<sup>-1</sup> at 0.5 A g<sup>-1</sup> and superb rate ability holding a specific capacitance of 270 F g<sup>-1</sup> at 100 A g<sup>-1</sup> in 6 M KOH electrolyte. The corresponding symmetrical capacitor has a superb cyclic stability with a low specific capacitance decay rate of 0.4% after 20,000 cycles at 5 A g<sup>-1</sup> in 1 M Na<sub>2</sub>SO<sub>4</sub> electrolyte. Moreover, measurements revealed that when used as adsorbent, the FWRA sample is ideal for removing methyl orange (MO) from water, exhibiting a superior adsorption ability of 260.8 mg g<sup>-1</sup>. Therefore, this study is expected to provide a simple and environmentally friendly technique for the generation of value-added and functional porous carbon materials from Chinese medicinal herbal residues, thus offering promising candidates for broad application areas.
BibTeX
@article{kong2022evaluation,
  author = {Wen Kong and Shuhui Wang and Xinyu Zhang and Xiao Fu and Wanju Zhang},
  title = {{Evaluation of Biological Pretreatment of Wormwood Rod Reies with White Rot Fungi for Preparation of Porous Carbon}},
  journal = {Journal of Fungi},
  year = {2022},
  doi = {10.3390/jof9010043},
}
Figure