Subsurface Imaging with Ambient Noise Interferometry

This direction is split into other directions: ambient noise interferometry. Its last version stays readable and citable here.

Version 1 of 117 papers26 conceptsfrozen 2026-10-04

Traditionally, to see what lies beneath the Earth's surface, geophysicists had to create their own signals—using explosions, heavy hammers, or air guns to send waves into the ground and record the echoes. This "active" approach is powerful but limited: it is expensive, logistically difficult, and provides only a snapshot in time.

A growing body of research suggests we don't need to make our own noise. Instead, we can listen to the "hum" of the planet. By correlating the random, ambient vibrations caused by ocean waves, traffic, and industrial activity, researchers can turn the environment itself into a continuous, high-resolution lens for the subsurface.

The Intuition of Cross-Correlation

The core idea, often called ambient noise interferometry, relies on a simple but profound mathematical trick: if you record random noise at two different locations and calculate the cross-correlation of those signals, the result behaves as if one location were a source and the other were a receiver.

As Knut Solna demonstrates in Correlation of ambient noise signals in the radiative transport regime, random scattering—usually considered a nuisance that blurs images—actually helps this process. In a scattering-rich environment, noise is randomized so thoroughly that it effectively illuminates the medium from all directions. This allows researchers to recover the "Green’s function," or the fundamental impulse response of the medium, without ever firing an active source.

Monitoring the Earth in Real Time

Because ambient noise is constant, this technique allows for continuous monitoring rather than one-off surveys. Researchers like Timothy Clements have used this to track how the Earth's crust "breathes" in response to environmental stress. In The Seismic Signature of California's Earthquakes, Droughts, and Floods, Clements shows that as groundwater is depleted during droughts, the seismic velocity of the shallow crust changes. These subtle shifts ($dv/v$) serve as a mechanical signature of the state of our water tables.

This capability is particularly useful in "Critical Zone" science. Qibin Shi and colleagues argue in Ambient field seismology in critical zone hydrological sciences that this method is the only way to achieve the temporal resolution needed to track permafrost melt or soil moisture dynamics at scale.

From Urban Bustle to Deep Oceans

The source of the noise can be anything. In Probing environmental and tectonic changes underneath Mexico City with the urban seismic field, Laura Ermert and her team used the "noise" of city traffic to monitor the compaction of clay soils beneath Mexico City. They even demonstrated that a single station can monitor its own surroundings by using autocorrelation—comparing a station's current noise to its historical record.

Similarly, Maleen Kidiwela and Kuan‐Fu Feng have applied these principles to the Cascadia Subduction Zone. In Active Protothrusts and Fluid Highways, they show how ocean wave energy can be used to probe underwater faults that are otherwise inaccessible to traditional GPS monitoring.

Mathematical Robustness and New Frontiers

The utility of noise correlation extends beyond seismology into radar and general wave physics. Liliana Borcea has developed methods like HCINT to image through highly turbulent or scattering media by processing sensor cross-correlations, as detailed in High-Resolution Interferometric Synthetic Aperture Imaging in Scattering Media.

Furthermore, Josselin Garnier has shown that these correlation techniques can be used to build "Reduced Order Models" (ROMs). In When data driven reduced order modeling meets full waveform inversion, the authors explain that ROMs built from noise correlations can make complex inversion problems more "convex," helping algorithms find the true structure of a medium without getting stuck in the mathematical traps that plague traditional methods.

Even the requirement for an array of sensors is being challenged. Mathias Fink explores how a single moving sensor can create a "synthetic aperture" for passive imaging in Ambient noise correlation-based imaging with moving sensors. By correlating signals from different points along its path, a single receiver can reconstruct the same information as a stationary network.

Papers in this version

History & citationVersion 1 · 2026-10-04

Split into other directions · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_subsurface_imaging_with_ambient_noise_in_5dca3bd4,
  title = {Subsurface Imaging with Ambient Noise Interferometry},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/subsurface-imaging-with-ambient-noise-interferometry/rdr_5dca3bd4c2934629be4bb290753d6ad7},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-22},
}

This exact version (version 1, frozen text):

@misc{lacuna_subsurface_imaging_with_ambient_noise_in_5dca3bd4_v1,
  title = {Subsurface Imaging with Ambient Noise Interferometry},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/subsurface-imaging-with-ambient-noise-interferometry/rdr_5dca3bd4c2934629be4bb290753d6ad7/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-22},
}