Traditional mobile robots are often designed as a collection of specialized parts: a wheeled or legged base for movement, and a dedicated robotic arm for interaction. However, this modularity comes at a cost. Adding a heavy, top-mounted arm increases mechanical complexity, shifts the center of mass, and reduces the robot's agility and payload efficiency.
A growing body of research suggests a more integrated approach: treating robotic limbs as generic actuators that can dynamically switch between locomotion and manipulation. By repurposing the legs of a quadruped or the frame of a mobile robot, these systems can interact with their environment without the weight penalty of specialized hardware.
The Duality of Limbs
The core intuition behind this research is that a limb is essentially a high-degree-of-freedom (DoF) chain capable of exerting force. Whether that force is used to push against the ground (locomotion) or an object (manipulation) is a matter of control, not just hardware. Voyles et al. describe this as "Intuitive Autonomy," where limbs transition dynamically based on the task.
This duality allows for surprising dexterity. For example, Shi et al. demonstrated that a quadruped robot could lie on its back and use its four legs like fingers to balance and rotate a yoga ball. By treating locomotive limbs as a multi-fingered hand, the robot achieves complex object interaction without any dedicated contact sensors. Similarly, Stolle and Arm developed "pedipulation" frameworks that allow robots to use their feet to manipulate objects while navigating cluttered environments, deciding in real-time whether to step over or push an obstacle.
Whole-Body Contact Manipulation
When robots use their entire structure rather than just an end-effector (like a gripper), they can handle much larger loads. This is known as whole-body manipulation. Jeon et al. showed that a quadruped could re-pose a 19.2 kg water drum—nearly 70% of its own body weight—by coordinating its torso and legs to lean into and push the object.
This strategy mimics how humans use their elbows to hold a door open or their shoulders to move furniture. Levé et al. formalized this by treating sliding and whole-surface contact as intentional primitives rather than constraints to be avoided. By optimizing for contact across the robot's entire surface, they reduced the computation time for complex manipulation plans by 96%. Even soft robotics adopts this principle; Zhang developed fabric limbs that wrap around objects like an elephant's trunk, allowing them to lift ten times their own weight through distributed contact.
Morphological and Stance Reconfiguration
To bridge the gap between walking and grasping, researchers are exploring new morphologies and stances. Lin et al. introduced "LocoMan," which mounts lightweight manipulators directly onto the calves of a quadruped. This keeps the center of gravity low and allows the robot to reach into narrow, low-clearance spaces—like under furniture—that a top-mounted arm could never access.
Other systems use stance transitions to free up limbs. Schakkal et al. developed a framework where a quadruped transitions to a bipedal stance, using its rear legs for stability while its front limbs catch dynamic objects in mid-air. This repurposing maintains the robot's inherent agility while enabling high-speed interaction.
Coordinating Interlimb Roles
The primary challenge in multi-purpose limb utilization is coordination: how does a robot decide which limb should walk and which should work? Zhu et al. proposed a framework called ReLIC, which uses a binary masking system to assign limbs to either locomotion or manipulation tasks. This allows a robot to, for instance, open a drawer with one foot while the other three maintain a stable walking gait.
This coordination can even work in reverse. While most research focuses on legs becoming arms, Zhang and Manchester showed that robotic arms can be repurposed for locomotion. Their "Wallbounce" framework allows a robot to push off walls with its arms to perform agile maneuvers, proving that the boundary between "leg" and "arm" is entirely fluid.
By moving away from specialized appendages, the authors of these works demonstrate that robots can become more capable, lighter, and more versatile by simply using the hardware they already have in more creative, whole-body ways.
Key Foundational Work
Sensor-Based Reactive Execution of Symbolic Rearrangement Plans by a Legged Mobile Manipulator (2018) — contributed 3 concept elements to this direction.
Robotics and IoT: Interdisciplinary Applied Research in the RIoT Zone (2017) — contributed 2 concept elements to this direction.