Mitigating Internal Leakage in Positive Displacement Clearances

16 concepts7 papers1 proposal

Positive displacement machines—such as gear pumps, screw compressors, and sliding vane expanders—rely on physically trapping a volume of fluid and moving it across a pressure gradient. In an ideal world, these trapped volumes would be perfectly sealed. In reality, moving parts require mechanical clearances to prevent friction, wear, and mechanical seizure.

These clearances create microscopic pathways connecting high-pressure discharge zones directly back to low-pressure suction zones. Driven by extreme pressure differentials, fluid inevitably escapes backward through these gaps. This phenomenon, known as internal leakage, is the primary driver of volumetric efficiency degradation across positive displacement architectures. When fluid leaks backward, the machine must expend extra energy to re-pump or re-compress the same medium, leading to severe performance drops, energy waste, and operational instability.

The Mechanics of Backflow and Efficiency Loss

To understand why internal leakage is so destructive, we must look at how fluid behaves within these internal clearances. The leakage rate is primarily governed by the pressure differential across the gap, the geometry of the clearance, and the properties of the fluid.

When a machine operates under high pressure ratios, the force driving the fluid through the clearances intensifies. For instance, in scroll compressors, Chang Liu et al. demonstrated in Experimental investigation of a horizontal hermetic scroll compressor with novel oil circuit design. that high pressure ratios force compressed gas to flow backward toward the intake. This backflow directly reduces the net mass flow rate of the compressor, meaning the system does more work for less throughput.

In rotary configurations like external gear pumps, the leakage paths are highly dynamic. Liping Chen et al. analyzed these complex internal pathways in Modeling and Simulation of Gear Pumps based on Modelica/Mworks®. By dividing the internal chambers into dynamic control volumes, the authors illustrated that leakage does not just lower volumetric efficiency; it also induces flow ripples and localized pressure peaks. These fluctuations generate severe noise, vibration, and mechanical stress, transforming a fluid dynamics problem into a structural reliability issue.

[High-Pressure Zone] ---> (Leakage Path through Clearance) ---> [Low-Pressure Zone]
         |                                                                |
         +--- (Reduces Net Mass Flow) <-----------------------------------+
         +--- (Causes Pressure Ripples & Vibration)

The Geometric Balancing Act

The most intuitive solution to leakage is simply tightening the mechanical clearances. However, engineering these gaps introduces a delicate trade-off between fluid leakage and mechanical losses.

If clearances are too large, volumetric efficiency plummets. If they are too tight, mechanical friction increases, risking component wear or catastrophic seizure due to thermal expansion. Furthermore, in compressible fluids, altering the geometry can introduce unexpected thermodynamic penalties.

In their study of trans-critical $\text{CO}_2$ rolling piston compressors, Yunfeng Chang et al. in Simulation and Development of Trans-critical CO2 Rolling Piston Compressor identified a critical trade-off: while larger clearances reduce the power required to compress the remaining gas, they trigger a massive net drop in both volumetric and adiabatic efficiency due to fluid bypass.

Additionally, the authors pointed out the danger of over-compression. If the discharge valve orifices are downsized or poorly optimized in an attempt to manage the high-pressure gas flow, the internal pressure can spike significantly above the actual discharge line pressure, wasting substantial energy. Optimizing the flow area alongside vane clearances is therefore required to facilitate smooth gas evacuation without sacrificing efficiency.

This optimization becomes even more challenging when systems operate away from their baseline parameters. In sliding vane expanders used for Organic Rankine Cycles (ORC), Fabio Fatigati et al. established in Design and Operational Control Strategy for Optimum Off-Design Performance of an ORC Plant for Low-Grade Waste Heat Recovery that internal leakage through blade-to-stator clearances is the single largest bottleneck during off-design operation. By simulating minimized clearance gaps, the authors achieved up to a 50% gain in net power output compared to baseline systems, underscoring that tight geometric control is essential for maintaining performance under fluctuating conditions.

Similarly, for twin-screw compressors, Yiqiao Li et al. noted in Review and Prospects of Numerical Simulation Research on Internal Flow and Performance Optimization of Twin-Screw Compressors that structural optimization of the rotor profiles to minimize leakage paths can yield immediate, measurable gains in isentropic efficiency.

Hydrodynamic and Viscous Self-Sealing

Because purely mechanical seals are constrained by manufacturing tolerances and thermal expansion, modern research focuses on leveraging the fluid itself to act as a dynamic seal within the clearance gaps.

Viscosity-Dominant Leakage Control

One approach relies on the inherent fluid properties of the working medium. In Study on Clearance Optimization of All-metal Screw Pumps: Experiment and Simulation, Mingzhong Li et al. investigated all-metal screw pumps operating in high-temperature environments (up to 400°C). At these extremes, components expand, making fixed mechanical seals impractical.

The authors demonstrated that a high-viscosity fluid acts as a self-sealing medium within the clearance gaps. The fluid's internal resistance to shear limits its own ability to flow backward through the clearance. Crucially, the authors discovered that fluid viscosity has a far more substantial impact on volumetric efficiency than the rotational speed of the pump. When fluid viscosity drops—either due to rising temperatures or water dilution—the secondary seal breaks down, causing leakage to surge.

High Viscosity Fluid:  [Clearance Gap] ===[ High Resistance / Low Leakage ]===>> Sealing Effect
Low Viscosity Fluid:   [Clearance Gap] ===[ Low Resistance / High Leakage ]===>> Efficiency Loss

Micro-Structured Surface Texturing

Instead of relying solely on bulk fluid properties, engineers can also alter the boundary layer physics within the clearance gap using surface texturing. Jin Xie et al. explored this mechanism in The mechanism performance of improved oil pump with micro-structured vanes by grinding micro-V-grooves (approximately 50 $\mu\text{m}$ deep) into the tips of oil pump vanes.

Vane Tip Profile with Micro-Grooves:
   |   |___|   |___|   |
   |   /   \   /   \   |  <-- Micro-V-Grooves generate localized hydrodynamic pressure
========================  <-- Stator Wall

These micro-grooves operate on a "Goldilocks" principle. When fluid attempts to escape through the vane-to-stator clearance, the micro-grooves disrupt the smooth leakage path, generating localized hydrodynamic pressure zones. This pressure acts as a contactless fluid barrier that opposes backflow while simultaneously maintaining a thin, lubricating film. By fine-tuning this microstructure, the authors managed to eliminate internal leakage paths without increasing mechanical wear, offering a path forward for high-efficiency, high-durability fluid machinery.

Key Foundational Work

Simulation and Development of Trans-critical CO2 Rolling Piston Compressor (2010) — contributed 4 concept elements to this direction.
Modeling and Simulation of Gear Pumps based on Modelica/Mworks® (2011) — contributed 1 concept elements to this direction.
History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_volumetric_efficiency_degradation_30af8b91,
  title = {volumetric efficiency degradation},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/volumetric-efficiency-degradation/rdr_30af8b91d1064bb0afcc6997871ad05b},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}

This exact version (version 1, frozen text):

@misc{lacuna_volumetric_efficiency_degradation_30af8b91_v1,
  title = {volumetric efficiency degradation},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/volumetric-efficiency-degradation/rdr_30af8b91d1064bb0afcc6997871ad05b/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-19},
}
About

These directions overlap with this one through shared papers.

See something wrong? Report a mistake