Review and Prospects of Numerical Simulation Research on Internal Flow and Performance Optimization of Twin-Screw Compressors

Yiqiao Li, Xing Zhao, Shan Liu, Chen Wang, Shenqiang Shen, Yali GuoEnergies 2025 · DOI

TL;DR

This review paper provides a comprehensive overview of the current state of numerical simulation research for twin-screw compressors, focusing on internal flow and performance optimization. It highlights the critical role of advanced simulation techniques in improving the energy efficiency and performance of these compressors, which are vital in various industrial applications.

What Problem Does This Paper Address?

Twin-screw compressors are essential components in numerous industries, from refrigeration to construction, due to their efficiency and reliability. However, optimizing their performance and energy efficiency is a complex challenge. Traditional design methods and experimental testing are often costly, time-consuming, and limited in their ability to capture the intricate internal flow dynamics. This paper addresses the need for a consolidated understanding of how numerical simulation techniques can overcome these limitations, offering a detailed review of the advancements, challenges, and future directions in simulating the internal flow and optimizing the performance of twin-screw compressors. The authors aim to bridge the gap in existing literature by providing a systematic review of this rapidly evolving field, particularly in the context of global energy-saving and carbon reduction initiatives.

Methods

The paper delves into various aspects of numerical simulation for twin-screw compressors:

  • Modeling: It discusses the establishment of physical models, including the generation of rotor profiles and the creation of 3D models. The use of specialized software like SCORG and TwinMesh for generating high-quality structured meshes is highlighted.
  • Mathematical Models: The review covers the evolution of mathematical models, including multiphase flow models (e.g., VOF, SFM), turbulence models (RANS, with a note on their limitations), and the importance of real gas state equations. It also touches upon novel models that incorporate factors like oil injection, heat transfer, and thermal deformation.
  • Meshing Techniques: The paper emphasizes the critical role of meshing in achieving accurate simulations, discussing the challenges posed by the complex geometry of twin-screw compressors and the advancements in dynamic mesh technology for capturing transient flows.
  • Numerical Simulation of Internal Flow: It details how CFD simulations are used to analyze complex flow phenomena, including vortex formation, separation, pressure and velocity distributions, and heat transfer.
  • Performance Optimization: The review explores how numerical simulations aid in optimizing structural parameters (rotor profiles, clearances) and operating conditions (speed, pressure ratio, injection parameters) to enhance volume efficiency, reduce losses, and improve overall performance.

Datasets

Not discussed in the paper. The paper focuses on reviewing existing research and methodologies rather than presenting new experimental data or benchmarks.

Key Insights and Ideas

  • The Intrinsic Link: A core insight is the profound connection between local complex flow characteristics within the compressor and its overall structural optimization and performance. Understanding these "local scale" phenomena is key to improving "component scale" and ultimately "system scale" performance.
  • Simulation as a Game-Changer: Numerical simulation offers a cost-effective and time-efficient alternative to physical prototyping, enabling rapid evaluation and optimization of designs, and significantly shortening R&D cycles.
  • Leakage is King (of Losses): Leakage is identified as the most significant factor affecting the volumetric efficiency of rotary compressors. Analyzing and minimizing leakage paths through structural optimization is crucial.
  • Multi-field Coupling is the Future: Current simulations often focus on one or two physical fields. The paper stresses the need for more comprehensive multi-field coupling (hydrodynamics, thermodynamics, mechanics, electromagnetism) for a more accurate understanding of compressor behavior, especially for variable-frequency applications.
  • The "Sweet Spot" for Optimization: For parameters like oil injection, there's an optimal range for injection pressure and position to achieve minimum power consumption and maximum performance, highlighting the need for precise control.

Key Results

The paper synthesizes findings from numerous studies, indicating that:

  • Numerical simulations can accurately predict compressor performance parameters, with errors often within a few percent when compared to experimental data.
  • Optimizing rotor profiles and reducing leakage areas can improve isentropic efficiency by up to 1.95%.
  • Adjusting suction end angles and discharge ports can significantly improve compressor efficiency, especially at high speeds.
  • Water injection can effectively enhance twin-screw compressor performance, with an optimal injection rate that is proportional to rotational speed and suction pressure.
  • Energy-saving control methods, such as adjusting slide valve position, can achieve energy-saving rates of up to 17.55%.

Limitations and Future Work

The authors identify several limitations and suggest future research directions:

  • Model Precision: Existing turbulence models have limitations in accurately simulating complex turbulent flows in screw compressors. There's a need for advanced, matched turbulence models and more realistic mathematical descriptions for multiphase flows, including real gas state equations.
  • Multi-field Coupling: A significant limitation is the lack of comprehensive consideration for multi-physical field coupling (e.g., electromagnetism's influence on motor performance). Future work should focus on deeply analyzing these coupling mechanisms.
  • Experimental Verification: While simulations are advancing, comprehensive and effective experimental verification methods are still needed. Diversified techniques beyond basic pressure and temperature measurements are required.
  • Structural-Flow Relationship: Further exploration of the internal relationship between complex flow characteristics and structural optimization is crucial for designing high-performance compressors.
  • Energy Saving and Environmental Friendliness: Continued research is needed to develop more energy-saving and environmentally friendly twin-screw compressors, potentially through multi-stage compression designs.
  • Intelligent Design: The future trend points towards intelligent industrial machinery design, leveraging artificial intelligence for more efficient and optimized compressor development.

Summary updated

Abstract

The twin-screw compressor exhibits significant application value in the fields of energy, refrigeration, construction, transportation, and related domains. Owing to the benefits of short cycles and low costs, numerical simulation technology has attracted increasing attention. Over recent years, the numerical simulation technology for twin-screw compressors has advanced rapidly, and many important results have been achieved. This paper comprehensively discusses the modeling method of twin-screw compressors, the meshing technique, advances in numerical simulation of internal flow, the research status of numerical simulation research regarding structural operating conditions, and performance optimization. The synergistic potential between these technologies for improving the performance and efficiency of twin-screw compressors is investigated. The numerical simulation research progress of the internal flow and performance optimization of twin-screw compressors is systematically reviewed. Against the background of global energy saving and carbon reduction, this paper offers readers an in-depth understanding of the technical challenges, research hotspots, and development directions in the related field. It fills the relevant gaps within the current literature. The results highlight the role and potential of deep exploration of the intrinsic relationship between local complex flow characteristics and structural optimization for the performance optimization of twin-screw compressors. For conforming to actual conditions and pertinency, mathematical models such as multiphase flow and turbulence models should be further improved. The current research results remain constrained by the lack of comprehensive consideration of multi-field coupling. In the future development of energy-saving and environment-friendly high-performance twin-screw compressors, numerical simulation research should be developed for high precision, multi-physical field coupling, influencing mechanism research, energy-saving, and environmental friendliness, and intelligence. It establishes a theoretical foundation for further enhancing the performance and mechanism theory of twin-screw compressors.
BibTeX
@inproceedings{li2025review,
  author = {Yiqiao Li and Xing Zhao and Shan Liu and Chen Wang and Shenqiang Shen and Yali Guo},
  title = {{Review and Prospects of Numerical Simulation Research on Internal Flow and Performance Optimization of Twin-Screw Compressors}},
  booktitle = {Energies},
  year = {2025},
  doi = {10.3390/en18102608},
}
Figure