As electronic systems become more compact, highly integrated, and operate at higher frequencies, they inevitably generate stray electromagnetic fields. If left unmanaged, this electromagnetic interference (EMI) degrades signal integrity, triggers algorithmic errors, and damages sensitive components. To achieve electromagnetic compatibility (EMC), modern research attacks the problem from two complementary angles: active suppression at the circuit level to minimize noise generation, and passive shielding at the material level to absorb escaping waves.
Active Suppression: Reshaping Noise at the Source
Why does electromagnetic noise happen in the first place? High-speed switching components, such as insulated-gate bipolar transistors (IGBTs) in power electronics, generate sharp voltage and current transients ($dv/dt$ and $di/dt$). As Liu et al. demonstrate, these high-energy transients act on the physical constraints of a circuit to produce wide-band conducted and radiated noise. This noise can corrupt data, cause control system resets, and trigger erroneous protection circuits. Furthermore, topological complexities—such as the absence of a common ground between the input source and output load—complicate control loops and exacerbate noise propagation, as noted by Duan et al..
Rather than relying solely on heavy physical filters to clean up noise after it has been created, active suppression techniques modify the underlying signals to prevent high-energy spikes:
- Spectrum Spreading: Instead of allowing clock energy to concentrate at a single sharp peak frequency, designers can spread it across a wider bandwidth. Park et al. achieved this by implementing a "Hershey-Kiss" modulation profile driven by a dual sigma-delta modulator architecture. This approach flattens the peak power spectrum by 10.2 dBm while eliminating the need for bulky, memory-based components.
- Common-Mode Voltage (CMV) Reduction: In three-phase inverters, high-frequency switching generates common-mode voltage, which drives EMI and induces damaging bearing currents in motor drives. To mitigate this, Guo et al. developed an optimized Model Predictive Control (MPC) strategy that avoids zero-voltage vectors and strategically selects adjacent active vectors, slashing EMI while maintaining current quality. Similarly, Yuan et al. optimized Space Vector Modulation in hybrid-switch T-type inverters to balance neutral-point voltage while reducing both losses and CMV, bypassing the need for large, expensive physical filters.
Passive Shielding: Trapping and Dissipating Stray Waves
When active suppression is insufficient or impractical, escaping waves must be blocked. Traditional shielding relies on metallic foils, but these primarily reflect waves. In dense electronic environments, reflected signals create secondary electromagnetic pollution that can disrupt neighboring components. The modern frontier of materials science focuses on absorption-dominated shielding—converting electromagnetic energy directly into heat through dielectric and magnetic losses.
To maximize absorption, a material must achieve excellent impedance matching (allowing waves to enter rather than bounce off the surface) and possess an internal architecture that repeatedly scatters the waves.
Advanced Microstructures and Hybrids
Zhao et al. repurposed the chemistry of common structural steel to construct highly anisotropic $\text{Fe}_3\text{C}$ microflakes, enhancing microwave absorption through optimized magnetic loss mechanisms. To overcome the weight and corrosion limitations of traditional metals highlighted by Ning et al., researchers are turning to self-assembled "ball-plate" structures combining MXene and $\text{TiO}_2$ hollow spheres. This design achieves a 72 dB shielding efficiency in a flexible 50 µm film by trapping waves within the hollow cavities, forcing internal reflections that dissipate the energy.
Nanofiber and Carbon Networks
Carbon-based networks provide excellent electrical pathways for dielectric loss. Wang et al. developed a modified graphene foam/polyaniline@epoxy composite that simultaneously boosts thermal conductivity and EMI shielding. To improve structural integrity and electrical continuity, Cheng et al. utilized polyaniline as a conductive "solder" to non-covalently weld graphene sheets within a polyimide film. Sustainable alternatives have also emerged: Ren et al. pyrolyzed bacterial cellulose into 3D web-like biocarbon nanofiber networks for efficient microwave dissipation.
Broadband and High-Frequency Absorption
For stealth and high-frequency applications, materials must be lightweight yet capable of broadband absorption. Zhang et al. integrated reduced graphene oxide (rGO) with high-entropy alloys to balance dielectric and magnetic losses, significantly widening the effective absorption bandwidth. Similarly, Cao et al. used an in situ electrospinning strategy to derive uniformly dispersed cobalt nanoparticles within carbon nanofibers from ZIF-67 frameworks, maximizing electromagnetic wave absorption.
At even higher frequencies, such as the terahertz (THz) spectrum, Chen et al. designed 3D-printed aerogel frameworks that mimic the staggered cellular structures found in bone and wood. This architecture creates a high green shielding index by trapping terahertz radiation within its biomimetic pores, minimizing secondary reflection back into the environment.
From Component Compatibility to System-Level Electromagnetic Safety
As systems grow more interconnected, EMI ceases to be an isolated hardware bug and becomes a systemic safety hazard. The industry is undergoing a paradigm shift from basic component-level electromagnetic compatibility (EMC) toward comprehensive "Electromagnetic Safety," as outlined by Fan et al.. This shift requires analyzing complex interactions within integrated environments rather than focusing on isolated components.
This systemic vulnerability is particularly acute in high-power or shared-medium environments:
- Industrial Automation: High-intensity electromagnetic fields in manufacturing create a dual threat. As Goncharova et al. point out, intense EMF can simultaneously impair the cognitive health of human operators and corrupt the operational algorithms of high-precision computer numerical control (CNC) tools, leading to catastrophic production errors or equipment damage.
- Shared Infrastructure: In Power Line Communication (PLC) systems, narrowband data signals share the same physical medium as high-voltage power. Tonello et al. emphasize that achieving reliable data transmission without disrupting nearby electronics remains a critical hurdle. Conversely, managing this proximity can yield innovative solutions: Ren et al. successfully synchronized underwater marine transmitters within 504 nanoseconds by locking the high-voltage AC power line frequency to a GPS signal, though they noted that rigorous shielding is mandatory to prevent noise pulses from disrupting the timing electronics.
- Physical Isolation: The fundamental necessity of isolating sensitive digital monitoring tools from high-voltage spark-gap noise dates back to the origins of radio experimentation, a dynamic revisited by Clerici et al. using modern Fourier analysis to demonstrate how near-field radiation decay patterns dictate physical isolation requirements in laboratory and industrial settings.
Key Foundational Work
SSCG with Hershey-Kiss modulation profile using Dual Sigma-Delta modulators (2010) — contributed 1 concept elements to this direction.
Revisiting the 1888 Hertz experiment (2006) — contributed 1 concept elements to this direction.