SSCG with Hershey-Kiss modulation profile using Dual Sigma-Delta modulators

Hyung‐Min Park, Hyun-Bae Jin, Jin-Ku KangIEICE 2010 · DOI

Abstract

This letter describes a spread spectrum clock generator (SSCG) circuit with the Hershey-Kiss modulation profile using two stacked sigma-delta modulators. The proposed Hershey-Kiss profile modulator generates various slopes to achieve a non-linear modulation profile. Since the modulators are implemented by digital blocks, the design can be easily modified for other applications. Simulation results show a peak power reduction level of 10.2 dBm with 5000 ppm down-spreading at 340 MHz operation using 0.13 μm CMOS.

Introduction

As electronic devices increase in speed, they generate higher levels of electromagnetic interference (EMI), which can disrupt neighboring components. Spread Spectrum Clock Generators (SSCGs) are commonly used to mitigate this by slightly modulating the clock frequency, spreading energy across a wider band to lower peak interference. While simple triangular modulation is often used, it tends to concentrate energy at the frequency boundaries. A "Hershey-Kiss" profile provides a more uniform energy distribution and superior EMI reduction. Traditionally, generating this non-linear curve required large Read-Only Memory (ROM) look-up tables, which consume significant chip area and lack flexibility.

Proposed Architecture

The researchers propose a purely digital approach using dual sigma-delta (ΣΔ) modulators to generate the Hershey-Kiss profile without the need for ROM. The system utilizes a cascaded architecture integrated into a Phase-Locked Loop (PLL) feedback path.

Block diagram of the proposed SSCG architecture featuring the dual-modulator Hershey-Kiss generator.

The modulator consists of two primary blocks:

  1. Slope Modulator: This block uses a 1st-order ΣΔ modulator and an 8-bit up/down counter to generate the rate of change (slope) for the frequency. By sweeping this counter, it creates a triangular variation in the slope itself.
  2. Division Modulator: This block takes the output from the slope modulator and uses a 2nd-order ΣΔ modulator with a 14-bit counter to produce the actual divider values for the multi-modulus divider in the PLL.

Modulation Principles

The core innovation of this design is modulating the slope of the frequency change rather than the frequency values directly. As illustrated in the figure below, by linearly changing the slope of the frequency modulation in a triangular fashion, the resulting frequency-over-time curve naturally forms the desired non-linear Hershey-Kiss shape.

Illustration of how triangular slope modulation (bottom) produces the non-linear Hershey-Kiss frequency profile (top).

This digital implementation is significantly more compact than ROM-based designs and is highly portable, as it can be synthesized into different manufacturing processes more easily than custom memory blocks.

Results and Discussion

The design was validated through circuit simulations using 0.13 μm CMOS process models at a target operating frequency of 340 MHz. Key performance metrics included:

  • EMI Reduction: A peak power reduction of 10.2 dBm compared to a non-spread clock.
  • Spreading Parameters: Achieved 5000 ppm down-spreading.
  • Modulation Frequency: The profile operated at a frequency of 31.25 kHz.

The Hershey-Kiss profile successfully flattened the "shoulders" of the frequency spectrum, preventing the energy spikes at the edges that typically occur with standard triangular modulation.

Conclusion

By replacing bulky memory-based components with a dual sigma-delta modulator architecture, the researchers achieved significant EMI reduction while maintaining a compact and flexible digital footprint. Future work may involve developing adaptive SSCGs that can adjust modulation profiles dynamically based on real-time interference levels.

Summary updated

Abstract

This letter describes a spread spectrum clock generator (SSCG) circuit with the Hershey-Kiss modulation profile using two stacked sigma-delta modulators. The proposed Hershey-Kiss profile modulator generates various slopes to achieve non-linear modulation profile. Since the modulators are implemented by digital blocks, it can be modified for other applications. Simulation results show that peak power reduction level of 10.2dBm with 5000ppm down spreading at the 340MHz operation using 0.13m CMOS.
BibTeX
@inproceedings{park2010sscg,
  author = {Hyung‐Min Park and Hyun-Bae Jin and Jin-Ku Kang},
  title = {{SSCG with Hershey-Kiss modulation profile using Dual Sigma-Delta modulators}},
  booktitle = {IEICE},
  year = {2010},
  doi = {10.1587/elex.7.1349},
}
Figure