Adaptive Transmission Policies for Energy Harvesting Communications

16 concepts9 papers

In traditional wireless networks, communication nodes operate under fixed power budgets or predictable battery lifespans. However, next-generation Internet of Things (IoT) devices, medical implants, and autonomous sensors increasingly rely on energy harvesting—drawing power dynamically from ambient sources, dedicated radio-frequency (RF) signals, or intermittent block arrivals.

This paradigm introduces a fundamental challenge: the availability of energy is stochastic and completely decoupled from the immediate demand for data transmission. If a node transmits too aggressively, it drains its energy buffer and suffers an outage. If it transmits too conservatively, it wastes opportunities to send fresh data or lets its internal queue grow stale.

To resolve this tension, a shared research direction has emerged around adaptive transmission policies. Instead of treating communication and energy management as isolated problems, these strategies dynamically couple transmission parameters—such as transmission probability, output power, and data rate—directly to the instantaneous state of the node's energy reserves and application requirements.

Balancing Battery State and Data Freshness in Random Access

Consider a network of energy-harvesting sensors attempting to send status updates over a shared channel using a random-access protocol like Slotted ALOHA. If every node transmits whenever it has a new packet, the network suffers from high contention and rapid battery depletion.

To optimize data freshness—quantified by the Age of Information (AoI)—Giuseppe Durisi et al. demonstrate in Age of Information in Slotted ALOHA With Energy Harvesting that a uniform transmission strategy is highly suboptimal. Instead, the authors propose an optimized policy where a node's transmission probability is scaled dynamically based on its current battery level. By scaling the probability up when the battery is full and down when it is near depletion, the system balances the risk of energy starvation against the need to keep information fresh.

This concept is expanded in Timely Status Updates in Slotted ALOHA Networks With Energy Harvesting, where Giuseppe Durisi et al. incorporate the time elapsed since the last successful transmission into the decision matrix. This multi-dimensional adaptation ensures that nodes with stale data and sufficient energy are prioritized, maximizing network throughput and minimizing average AoI under high network contention.

The core intuition here is that energy is a resource that can be traded for channel access equity. This principle also applies to two-way communication channels where nodes can harvest energy from the signals sent by their partners. As shown by Petar Popovski and Osvaldo Simeone in Two-way communication with energy exchange and further developed by Petar Popovski et al. in Interactive Joint Transfer of Energy and Information, adjusting transmission probabilities based on internal energy states allows the system to approach theoretical capacity limits by optimizing the simultaneous flow of information and power.

Dynamic Power and Rate Scaling in Relay Networks

In multi-hop or relay networks, the challenge shifts from channel contention to downstream efficiency. A harvesting relay node acts as an intermediary, capturing energy from a source transmitter and using it to forward data to a destination. Here, a static transmission power strategy fails because it ignores the fluctuations in both the harvested energy and the downstream channel quality.

Ali Mohammad Fouladgar and Osvaldo Simeone address this in On the Transfer of Information and Energy in Multi-User Systems, showing that the optimal amount of energy a source should transfer to a relay depends heavily on the signal-to-noise ratio (SNR) of the second hop. If the downstream SNR is low, the source must prioritize transferring more energy to empower the relay; if it is high, the source can focus on maximizing the immediate information rate.

Once the energy is received by the relay, how should it be spent? In On joint energy and information transfer in relay networks with an imperfect power amplifier, Behrooz Makki et al. design a strategy where the relay dynamically scales its transmission power to match the exact amount of energy harvested in the preceding phase. This adaptive scaling mitigates the inefficiencies and baseline power demands of realistic, imperfect hardware components.

For self-sustainable systems like medical implants, waiting for a battery to reach a high charge threshold can introduce unacceptable latency. To circumvent this, Ting Ning et al. propose a "best-effort" transmission policy in Energy Buffer-Aided Wireless-Powered Relaying System for Self-Sustainable Implant WBAN. Instead of waiting for a full charge, the relay dynamically adjusts its forwarding power based on whatever energy is currently available in the buffer, significantly reducing data outages.

[Source] ---> (Variable Energy/Info Transfer) ---> [Relay Buffer] ---> (Best-Effort Scaling) ---> [Destination]

When energy arrives in discrete blocks rather than a continuous stream, the timing of transmission matters just as much as the power level. In On achievable rates of AWGN energy-harvesting channels with block energy arrival and non-vanishing error probabilities, Silas L. Fong et al. analyze this using an adaptive "save-and-transmit" strategy. By dynamically adjusting the transmission rate based on the block length of energy arrivals, the authors prove that adaptive strategies fundamentally outperform non-adaptive alternatives under non-vanishing error probabilities.

Information-Driven Energy Conservation

While adapting to the availability of energy is crucial, true efficiency requires adapting to the value of the communication itself. In wireless sensor networks used for feedback control systems, transmitting every single measurement wastes precious harvested energy on redundant data.

Touraj Soleymani and John S. Baras bridge this gap in LQG Control via Wireless Sensor Networks with Minimal Transmission Power by co-designing the network controller and the transmission power mechanism. In their framework, transmission power is modulated based on the information content of the sensor's measurements. When the state estimation error at the controller is low, the sensor node enters a zero-power sleep mode. The node only expends its harvested energy to transmit when the estimation error crosses a critical threshold, preserving its battery for moments when data delivery is vital to maintaining control stability.

Key Foundational Work

Interactive Joint Transfer of Energy and Information (2013) — contributed 3 concept elements to this direction.
On the Transfer of Information and Energy in Multi-User Systems (2012) — contributed 2 concept elements to this direction.
Two-way communication with energy exchange (2012) — contributed 1 concept elements to this direction.
History & citationVersion 1 · 2026-10-04

Current · Permanent link

View frozen version 1

Cite this direction

Latest version (a living page):

@misc{lacuna_energy_aware_adaptive_relaying_1e0bf46e,
  title = {energy-aware adaptive relaying},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/energy-aware-adaptive-relaying/rdr_1e0bf46e84fe4bbabd16980b82655c23},
  note = {Latest version of a living research direction; cite a version for a fixed text. Accessed 2026-11-19},
}

This exact version (version 1, frozen text):

@misc{lacuna_energy_aware_adaptive_relaying_1e0bf46e_v1,
  title = {energy-aware adaptive relaying},
  author = {{Lacuna}},
  howpublished = {Lacuna research direction},
  year = {2026},
  url = {https://lacuna.tiptreesystems.com/direction/energy-aware-adaptive-relaying/rdr_1e0bf46e84fe4bbabd16980b82655c23/v/1},
  note = {Version 1, frozen 2026-10-04. Accessed 2026-11-19},
}

See something wrong? Report a mistake