In classical semiconductor physics, creating a heterojunction requires finding materials with compatible crystal lattices. If the atomic spacings mismatch, the interface fractures with defects and dislocations, destroying the desired electronic properties. Atomic-scale heterostructure synthesis solves this by shifting the paradigm from rigid chemical bonding to mechanical and epitaxial stacking. By layering materials at the scale of single atoms or unit cells, researchers can force entirely new quantum behaviors to emerge at the interfaces.
Bypassing the Lattice Match via Van der Waals Stacking
Why can we stack completely different two-dimensional (2D) materials without them cracking or degrading? As Anhan Liu et al. point out in The Roadmap of 2D Materials and Devices Toward Chips, 2D materials possess surfaces entirely free of dangling bonds. Because there are no out-of-plane chemical bonds looking for a partner, layers do not need to share a matching crystal structure to sit stably on top of one another. Instead, they are held together by weak van der Waals forces.
As Young-Woo Son explains in Looking Forward on the Physics of Low-dimensional Crystals Heterostructures, this vertical stacking allows researchers to bypass traditional lattice-matching requirements entirely. Materials with wildly disparate electronic properties can be combined into a single, atomically sharp device without generating structural defects.
To build these structures without introducing performance-degrading contaminants, researchers rely on dry transfer techniques. V. E. Calado et al. demonstrated in Ballistic transport in graphene grown by chemical vapor deposition that placing thin films onto atomically flat insulating substrates without liquid solvents preserves a clean electronic environment, enabling micron-scale ballistic transport. Similarly, Xiyu Sun et al. utilized a nondestructive dry transfer technique in Facile formation of van der Waals metal contact with III-nitride semiconductors to laminate metal electrodes onto target semiconductors, avoiding the high-energy bombardment and atomic diffusion typical of traditional thermal evaporation.
This clean assembly method unlocks a unique degree of freedom: the twist angle. Yuhang Jiang details the "tear-and-stack" fabrication method in Physical properties of novel electronic states related to flat band in twisted two-dimensional quantum materials, where a single atomic layer is split and re-stacked with a controlled rotational offset. This ensures identical lattice constants before the twist is applied, creating moiré superlattices that host "flat bands" where electron kinetic energy is suppressed, allowing electron-electron interactions to dominate and give rise to unconventional superconductivity.
Growing Atomically Flat Crystals via Epitaxial Superlattices
When dealing with materials that are not naturally layered—such as complex transition metal oxides—researchers cannot simply peel them apart. Instead, they construct artificial superlattices layer-by-layer using Pulsed Laser Deposition (PLD) or Molecular Beam Epitaxy (MBE).
The challenge here is maintaining absolute structural perfection across each atomic layer. To achieve this, synthesis setups incorporate Reflection High-Energy Electron Diffraction (RHEED) for real-time monitoring. As M. Kareev et al. demonstrate in Strain-mediated metal-insulator transition in epitaxial ultrathin films of NdNiO3, tracking the oscillations of high-energy electron diffraction patterns allows researchers to monitor the formation of individual atomic layers in situ, ensuring precise stoichiometry and structural perfection at the interface.
Xiaoran Liu et al. show in Electronic and magnetic properties of (1 1 1)-oriented CoCr2O4 epitaxial thin film that this real-time feedback ensures a layer-by-layer growth mode, resulting in interfaces that are smooth at the atomic scale. Furthermore, this approach can bridge the gap between different dimensions. Umeshwar Reddy Nallasani et al. demonstrated in Structural and surface characterizations of 2D β-In2Se3/3D β-Ga2O3 heterostructures grown on c-Sapphire substrates by molecular beam epitaxy that quasi-van der Waals epitaxy can grow 2D materials directly onto 3D substrates by relying on weak interlayer forces rather than rigid chemical bonding, using real-time RHEED monitoring to maintain phase purity and orientation.
Emergent Quantum Phenomena at the Interface
Why go to such extreme lengths to control materials at the atomic scale? The answer lies in the physics that emerges when electrons are confined or forced to interact across an interface.
Spatial Confinement and Phase Transitions
Reducing the physical dimensions of a material alters its electronic phase stability. Satoshi Okamoto et al. successfully triggered a Mott metal-insulator transition in Quantum confinement of Mott electrons in ultrathin LaNiO<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mrow/><mml:mrow><mml:mn>3</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>/LaAlO<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mrow/><mml:mrow><mml:mn>3</mml:mn></mml:mrow></mml:msub></mml... by confining nickelate layers to just three unit cells within an insulating superlattice, forcing the system from a 3D metallic state into a 2D localized state.
Interfacial Orbital Coupling
Placing two materials with different orbital characteristics next to each other creates entirely new magnetic and electronic states. John Nichols et al. explored this in Emerging magnetism and anomalous Hall effect in iridate–manganite heterostructures by layering a $3d$ antiferromagnetic insulator ($\text{SrMnO}_3$) with a $5d$ paramagnetic metal ($\text{SrIrO}_3$). The strong coupling at the interface yielded emergent ferromagnetism and a significant anomalous Hall effect—phenomena completely absent in either parent compound.
Similarly, Di Yi et al. leveraged this in Atomic-scale control of magnetic anisotropy via novel spin–orbit coupling effect in La 2/3 Sr 1/3 MnO 3 /SrIrO 3 superlattices to achieve atomic-scale control of magnetic anisotropy, showing that inserting thin layers of $\text{SrIrO}_3$ (which possesses massive spin-orbit coupling) can reorient the magnetic easy axis of an adjacent ferromagnetic layer.
Interlayer Coulomb Interactions
Finally, these ultra-clean interfaces allow for strong Coulomb interactions between separate layers. Ruishi Qi et al. demonstrated in Electrically controlled interlayer trion fluid in electron-hole bilayers that stacking atomically thin transition metal dichalcogenides separated by a dielectric spacer enables the formation and electrical control of a "trion fluid"—a novel state of matter composed of three-particle electron-hole complexes. By tuning the spatial confinement and interlayer interactions, these artificial heterostructures become highly customizable quantum playgrounds.
Key Foundational Work
Evolution of the electronic structure from electron-doped to hole-doped states in the two-dimensional Mott-Hubbard system<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mi mathvariant="normal">La</mml:mi></mml:mrow><mml:mrow><mml:mn>1.17</mml:mn><mml:mi>−</mml:mi><mml:mi>x</mml:mi></mml:mrow></mml:msub></mml:mrow><mml:mrow><mml:msub><mml:mrow><mml:mi mathvariant="normal">Pb</mml:mi></mml:mrow><mml:mrow><mml:mi>x</mml:mi></mml:mrow></mml:msub></mml:mrow><mml:mrow><mml:msub><mml:mrow><mml:mi mathvariant="normal">VS</mml:mi></mml:mrow><mml:mrow><mml:mn>3.17</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math> (2004) — contributed 1 concept elements to this direction.
Phase change observed in ultrathin Ba0.5Sr0.5TiO3 films by in situ resonant photoemission spectroscopy (2007) — contributed 1 concept elements to this direction.