WUFlux: an open-source platform for 13C metabolic flux analysis of bacterial metabolism

Lian He, Stephen Gang Wu, Muhan Zhang, Yixin Chen, Yinjie J. TangBMC Bioinformatics 2016 · OpenReview

TL;DR

This paper introduces WUFlux, a user-friendly, open-source MATLAB platform designed to simplify 13C-metabolic flux analysis (13C-MFA) for bacterial metabolism. By providing pre-built templates and a graphical interface, WUFlux aims to lower the barrier to entry for researchers, enabling more accessible and standardized analysis of microbial metabolic pathways.

What Problem Does This Paper Address?

Metabolic flux analysis, particularly 13C-MFA, is a powerful technique for understanding how microbes utilize nutrients and produce biomass. It offers deeper insights than simpler methods like Flux Balance Analysis (FBA) by tracing the flow of carbon atoms through metabolic networks. However, performing 13C-MFA is notoriously complex and time-consuming. It requires specialized knowledge in metabolic network construction, understanding carbon transitions, and proficiency in programming for data analysis and flux calculations. This steep learning curve, coupled with the experimental demands of 13C-labeling, has limited its widespread adoption, especially for non-model organisms. The authors aim to democratize this technique by providing a more accessible and standardized tool.

Methods

WUFlux is built as a steady-state 13C-MFA platform within MATLAB, leveraging its GUIDE environment for a graphical user interface (GUI). Key methodological contributions include:

  • User-Friendly Interface: The GUI allows users to modify metabolic models based on their specific experimental conditions without extensive programming.
  • Data Correction: WUFlux incorporates an algorithm to directly correct raw mass spectrometry (MS) data from derivatized proteinogenic amino acids, specifically TBDMS-derivatized ones, by removing background noise.
  • Pre-built Templates: To streamline model construction, WUFlux offers templates for common microbial types, including chemoheterotrophic bacteria (e.g., E. coli, Bacillus subtilis), photomixotrophic cyanobacteria (Synechocystis), and vanillin-degrading bacteria.
  • Flexible Modeling: Users can easily modify these templates by adjusting metabolic reactions, boundary conditions, and reversibility.
  • Flux Calculation: The platform uses the "element metabolite unit" (EMU) algorithm for simulating mass isotopomer distributions (MIDs) and MATLAB's fmincon function for non-linear optimization to estimate flux distributions.
  • Confidence Interval Estimation: A Monte Carlo method is employed to determine confidence intervals for the calculated fluxes, providing a measure of uncertainty.
  • Visualization Tools: WUFlux includes functions for visualizing computed fluxes on the metabolic network and comparing simulated vs. experimental MID data.

Datasets

The paper does not explicitly list or introduce new benchmark datasets for training. Instead, it focuses on validating WUFlux by reproducing results from previously published studies. Specifically, they used data from engineered E. coli strains producing fatty acids, comparing their WUFlux results to those obtained from other MFA software like METRAN and INCA. This approach serves as an evaluation of WUFlux's accuracy and comparability.

Key Insights and Ideas

  • Democratizing 13C-MFA: The core idea is that making 13C-MFA more accessible through a user-friendly interface and pre-built templates can significantly accelerate research in microbial metabolism, especially for non-model organisms.
  • Integrated Workflow: WUFlux provides an end-to-end solution, from raw data correction to flux visualization, reducing the need for users to stitch together multiple disparate tools.
  • Importance of Data Correction: The ability of WUFlux to directly correct raw MS data is crucial, as experimental noise and artifacts can significantly impact flux estimations.
  • Impact of Model Constraints: The paper highlights how constraints like cofactor and ATP balances can influence fluxome results, emphasizing the need for careful model setup and interpretation. For instance, the influence of P/O ratios on flux estimation is shown to be dependent on whether energy balance is strictly enforced.

Key Results

  • WUFlux successfully reproduced MID data and flux profiles from previously published studies, showing excellent agreement with a well-developed mass isotope correction software.
  • Comparisons with METRAN and INCA showed that WUFlux's estimated flux values and major changes between control and engineered strains were in good agreement, with differences within 2% of the glucose uptake rate.
  • The platform can analyze carbon and energy metabolism for various substrates and provides insights into cellular energy expenditure, such as maintenance energy costs.
  • The study demonstrated that flux estimation can be insensitive to P/O ratios under "energy unbalanced" conditions but significantly affected under "energy balanced" conditions, illustrating the impact of model assumptions.

Limitations and Future Work

  • Model Complexity: While WUFlux simplifies the process, constructing accurate metabolic models still requires a good understanding of the organism's metabolism. The paper notes that 13C-MFA can be demanding, and WUFlux aims to reduce this demand, not eliminate it entirely.
  • Steady-State Assumption: WUFlux is designed for steady-state 13C-MFA. The paper does not discuss its application to non-steady-state conditions, which can be important for dynamic metabolic processes.
  • Future Work: The authors plan to continue documenting curated models of non-model microbial species and improving WUFlux's performance. They also intend to expand the software package with more flux models of non-model microbial species.

Summary updated

Abstract

Background Flux analyses, including flux balance analysis (FBA) and 13C-metabolic flux analysis (13C-MFA), offer direct insights into cell metabolism, and have been widely used to characterize model and non-model microbial species. Nonetheless, constructing the 13C-MFA model and performing flux calculation are demanding for new learners, because they require knowledge of metabolic networks, carbon transitions, and computer programming. To facilitate and standardize the 13C-MFA modeling work, we set out to publish a user-friendly and programming-free platform (WUFlux) for flux calculations in MATLAB®. Results We constructed an open-source platform for steady-state 13C-MFA. Using GUIDE (graphical user interface design environment) in MATLAB, we built a user interface that allows users to modify models based on their own experimental conditions. WUFlux is capable of directly correcting mass spectrum data of TBDMS (N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide)-derivatized proteinogenic amino acids by removing background noise. To simplify 13C-MFA of different prokaryotic species, the software provides several metabolic network templates, including those for chemoheterotrophic bacteria and mixotrophic cyanobacteria. Users can modify the network and constraints, and then analyze the microbial carbon and energy metabolisms of various carbon substrates (e.g., glucose, pyruvate/lactate, acetate, xylose, and glycerol). WUFlux also offers several ways of visualizing the flux results with respect to the constructed network. To validate our model’s applicability, we have compared and discussed the flux results obtained from WUFlux and other MFA software. We have also illustrated how model constraints of cofactor and ATP balances influence fluxome results. Conclusion Open-source software for 13C-MFA, WUFlux, with a user-friendly interface and easy-to-modify templates, is now available at http://www.13cmfa.org /or ( http://tang.eece.wustl.edu/ToolDevelopment.htm ). We will continue documenting curated models of non-model microbial species and improving WUFlux performance.
BibTeX
@article{he2016wuflux,
  author = {Lian He and Stephen Gang Wu and Muhan Zhang and Yixin Chen and Yinjie J. Tang},
  title = {{WUFlux: an open-source platform for 13C metabolic flux analysis of bacterial metabolism}},
  journal = {BMC Bioinformatics},
  year = {2016},
  url = {https://openreview.net/forum?id=MXJOkeGRzhQ},
}
Figure