Upper crust anisotropy of the 2020 Jiashi MS 6.4 earthquake

Jin Li, Yuan Gao, Shaohui ZhouFrontiers in Earth Science 2023 · DOI

Abstract

The 2020 Jiashi $M_S$ 6.4 earthquake occurred in a complex tectonic environment at the intersection of the Pamir Plateau and the Tarim Basin. To investigate the upper crustal anisotropy and seismogenic conditions, researchers rebuilt the earthquake catalog using the "Match & Locate" (M&L) method, identifying 9,695 events—a 7.3-fold increase over official records. Shear-wave splitting (SWS) analysis revealed fast-wave polarizations predominantly in the NW or NNW directions, aligning with regional tectonic stress and buried blind faults. However, station HLJ exhibited an E–W polarization, reflecting the influence of the local Kalpin thrust nappe structure. Temporal analysis of delay times indicated distinct stress accumulation and release phases associated with the mainshock and aftershock sequence.

Introduction

The Jiashi region in Xinjiang, China, is characterized by intense tectonic activity and frequent strong earthquakes. Understanding the crustal stress state and fracture orientation is crucial for seismic hazard assessment. Crustal anisotropy, measured through shear-wave splitting, provides a direct window into these properties. As shear waves traverse an anisotropic medium, they split into fast and slow components. The polarization of the fast wave typically aligns with the dominant stress field or fracture strike, while the delay time between waves indicates the intensity of the anisotropy.

Methods: Expanding the Seismic Record

A significant challenge in studying microseismicity is the incompleteness of standard catalogs. This study utilized the Match & Locate (M&L) method to detect missing micro-events. By using 1,431 known earthquake waveforms as templates, the algorithm scanned continuous data from five seismic stations (XKR, BPM, HLJ, L6505, and L6513) to identify similar, lower-magnitude events.

The Match & Locate (M&L) method identifies microseismic events by cross-correlating template waveforms with continuous seismic data.

Following the catalog expansion, the System Analysis Method (SAM) was applied to calculate SWS parameters, focusing on fast-wave polarization and normalized delay times.

Results and Tectonic Implications

The M&L method successfully expanded the catalog to 9,695 events, providing a high-resolution dataset for anisotropy analysis. The spatial distribution of these events and the resulting polarization patterns offer key insights into the regional tectonics.

Map of the study area showing the 2020 Jiashi earthquake sequence, seismic stations, regional stress field (blue arrows), and major fault structures.

Polarization Patterns

At stations BPM, XKR, L6505, and L6513, the fast shear-wave polarizations were oriented NW or NNW. This direction is consistent with the regional maximum horizontal compressive stress and the strike of buried "blind" faults in the Jiashi area. In contrast, station HLJ, located within the Halajun Basin, showed an E–W polarization. This suggests that the local Kalpin thrust nappe structure dominates the anisotropy at this location, overriding the regional stress signal.

Stress Dynamics

The normalized delay times, ranging from 1.2 to 2.60 ms/km, reflect varying fracture densities. Temporal analysis at station XKR showed a sharp increase in delay time immediately following the $M_S$ 6.4 mainshock, followed by a gradual decrease. This pattern signifies rapid stress loading by the main rupture and subsequent release through the aftershock sequence. At station HLJ, a stress-release process was observed even before the mainshock occurred.

Conclusion

By significantly enhancing the earthquake catalog through microseismic detection, this study provides a detailed map of upper crustal anisotropy in the Jiashi region. The findings highlight the complex interplay between regional tectonic stress and local geological structures like the Kalpin thrust. The observed temporal variations in delay times offer a valuable record of the stress cycle associated with major seismic events, improving our understanding of the seismogenic environment in one of China's most active tectonic zones.

Summary updated

Abstract

The 2020 Jiashi M S 6.4 earthquake occurred north of the 1997–1998 Jiashi earthquake swarm. Because of its complex tectonic environment and frequent strong earthquake occurrence, scholars have paid extensive attention to this area. To study the upper crustal anisotropy in the source area, we applied microseismic event detection and shear-wave splitting techniques to the seismic data recorded by five stations around the epicenter. First, the earthquake catalog of the Jiashi M S 6.4 earthquake sequence was rebuilt using the “Match & Locate” method. A total of 9,695 earthquake events were obtained, and the number of newly detected earthquakes was approximately 7.3 times the number in the officially released catalog. The newly identified microseismic data greatly increased the number of effective records and improved the reliability of the results. We analyzed shear-wave splitting according to the updated catalog. The results showed that the dominant polarizations of the fast shear waves were in NW or NNW at the stations BPM, XKR, L6505, and L6513, consistent with the stress near the source area. There are also blind faults with an NNW direction in the strike distributing en echelon and parallel to the main stress direction in the Jiashi seismic area. Thus, the fast shear-wave polarization of the four stations may also reflect the strike of multiple buried NNW faults in the study area. The fast shear-wave polarization of station HLJ, located at the Halajun Basin, was E–W, with the overall trend of the Kalpin thrust nappe structure. However, this station didn’t show the same NW or NNW fast-wave direction as the four stations previously mentioned. This finding may indicate that the NW-trending buried faults in the Jiashi seismic area have a limited size in both the length and the depth, only reaching northward near the second row of the Kapingtag nappe structure. The temporal trend of the delay time at station HLJ showed that a stress-release process occurred before the M S 6.4 earthquake and that stress-release occurred again after the mainshock. At station XKR, the delay time rapidly increased and then fell in the early period after the M S 6.4 earthquake, indicating that stress accumulated rapidly after the main earthquake but was released during the aftershock sequence. This study provides novel insights into the complex structural characteristics and seismogenic environment in the Jiashi area.
BibTeX
@inproceedings{li2023upper,
  author = {Jin Li and Yuan Gao and Shaohui Zhou},
  title = {{Upper crust anisotropy of the 2020 Jiashi MS 6.4 earthquake}},
  booktitle = {Frontiers in Earth Science},
  year = {2023},
  doi = {10.3389/feart.2023.1160676},
}
Figure