Uplink Sensing Using CSI Ratio in Perceptive Mobile Networks

Zhitong Ni, J. Andrew Zhang, Kai Wu, Ren Ping Liu

Abstract

Uplink sensing in perceptive mobile networks (PMNs), which uses uplink communication signals for sensing the environment around a base station, faces challenging issues of clock asynchronism and the requirement of a line-of-sight (LOS) path between transmitters and receivers. The channel state information (CSI) ratio has been applied to resolve these issues, however, current research on the CSI ratio is limited to Doppler estimation in a single dynamic path. This paper proposes an advanced parameter estimation scheme that can extract multiple dynamic parameters, including Doppler frequency, angle-of-arrival (AoA), and delay, in a communication uplink channel and completes the localization of multiple moving targets. Our scheme is based on the multi-element Taylor series of the CSI ratio that converts a nonlinear function of sensing parameters to linear forms and enables the applications of traditional sensing algorithms. Using the truncated Taylor series, we develop novel multiple-signal-classification grid searching algorithms for estimating Doppler frequencies and AoAs and use the least-square method to obtain delays. Both experimental and simulation results are provided, demonstrating that our proposed scheme can achieve good performances for sensing both single and multiple dynamic paths, without requiring the presence of a LOS path.

1. Introduction

Perceptive Mobile Networks (PMNs) represent a paradigm shift in cellular infrastructure, aiming to integrate sensing capabilities directly into the communication network. By utilizing existing signals, PMNs can turn base stations into high-resolution radar systems. Among various sensing modes, uplink sensing is particularly promising as it leverages signals transmitted from User Equipment (UE) to the Base Station (BS) to detect and track objects in the environment.

Uplink sensing scenario in a Perceptive Mobile Network (PMN).

However, practical implementation faces two significant hurdles: clock asynchronism between the UE and BS, which introduces Timing Offsets (TO) and Carrier Frequency Offsets (CFO), and a traditional dependency on a strong Line-of-Sight (LOS) path. This paper introduces a novel method to overcome these barriers using the CSI ratio and a multi-element Taylor series expansion.

2. Methodology

2.1 The CSI Ratio and Spatial Division

The core of the proposed solution is the mathematical manipulation of Channel State Information (CSI). By calculating the ratio of CSI received at different antennas, common hardware synchronization errors (TO and CFO) are effectively canceled. Crucially, the research demonstrates that this cancellation only works reliably when dividing signals across the spatial domain (antennas), as temporal or frequency-based division can re-introduce offsets.

2.2 Multi-element Taylor Series Linearization

The CSI ratio is inherently a complex, nonlinear function of target parameters. To make this tractable for standard sensing algorithms, the authors employ a truncated multi-element Taylor series. This linearization is the critical step that allows the application of high-resolution algorithms to extract multiple parameters simultaneously.

2.3 Parameter Extraction Algorithms

  • Clutter Removal: The "Difference of CSI-ratio" (D-CSIR) is introduced to isolate dynamic paths (moving targets) from the static background clutter.
  • Doppler and AoA Estimation: Once linearized, the Multiple Signal Classification (MUSIC) algorithm is used to estimate the speeds and angles of multiple targets.
  • Delay Estimation: A Least-Squares (LS) approach is applied to determine the propagation delay, which is necessary for calculating the target's distance.

3. Experimental and Simulation Results

The proposed scheme was validated through both real-world experiments and numerical simulations. Experimental data was collected using a 3-antenna commercial WiFi device (5.32 GHz) to track a human target. The results showed high trajectory accuracy, closely matching ground truth data from mmWave radar.

In MATLAB simulations (3 GHz carrier), the method was tested against benchmarks like AMS and CACC-MUSIC. The proposed estimator significantly outperformed these benchmarks, particularly in Non-Line-of-Sight (NLOS) scenarios where traditional methods often fail. Furthermore, the vectorized manifold approach improved angular resolution, allowing the system to distinguish between multiple targets even with a limited antenna array.

4. Discussion and Insights

A key finding of this work is that the Taylor series convergence actually improves when static paths (e.g., reflections from walls) are stronger than dynamic paths. Since static reflections are dominant in most wireless environments, this makes the method exceptionally robust. Unlike previous CSI-ratio techniques, this scheme does not require a dominant LOS path, enabling "around-the-corner" sensing capabilities.

5. Conclusion and Future Work

This paper presents a robust framework for multi-parameter uplink sensing in asynchronous PMNs. By linearizing the CSI ratio, the authors enable the detection of multiple targets in complex NLOS environments. Future research will focus on reducing the computational load of grid-searching algorithms and improving the sensitivity of absolute delay estimation, which remains a challenge in highly cluttered dynamic scenes.

Summary updated

Abstract

Uplink sensing in perceptive mobile networks (PMNs), which uses uplink communication signals for sensing the environment around a base station, faces challenging issues of clock asynchronism and the requirement of a line-of-sight (LOS) path between transmitters and receivers. The channel state information (CSI) ratio has been applied to resolve these issues, however, current research on the CSI ratio is limited to Doppler estimation in a single dynamic path. This paper proposes an advanced parameter estimation scheme that can extract multiple dynamic parameters, including Doppler frequency, angle-of-arrival (AoA), and delay, in a communication uplink channel and completes the localization of multiple moving targets. Our scheme is based on the multi-element Taylor series of the CSI ratio that converts a nonlinear function of sensing parameters to linear forms and enables the applications of traditional sensing algorithms. Using the truncated Taylor series, we develop novel multiple-signal-classification grid searching algorithms for estimating Doppler frequencies and AoAs and use the least-square method to obtain delays. Both experimental and simulation results are provided, demonstrating that our proposed scheme can achieve good performances for sensing both single and multiple dynamic paths, without requiring the presence of a LOS path.
BibTeX
@article{ni2023uplink,
  author = {Zhitong Ni and J. Andrew Zhang and Kai Wu and Ren Ping Liu},
  title = {{Uplink Sensing Using CSI Ratio in Perceptive Mobile Networks}},
  journal = {IEEE Transactions on Signal Processing},
  year = {2023},
  doi = {10.1109/tsp.2023.3294626},
}
Figure