Uplink Rate Maximization for Pinching Antenna- Assisted Covert Backscatter Communication

Yulei Wang, Yalin Liu, Yaru Fu, Yuanwei LiuarXiv 2025 · DOI · arXiv

Introduction

Backscatter Communication (BSC) is a cornerstone for low-power Internet of Things (IoT) applications, where devices "hitchhike" on existing radio frequency (RF) signals to transmit data. Despite its efficiency, BSC faces two major hurdles: the "double near-far" problem—where signal attenuation occurs both during energy harvesting and data reflection—and security vulnerabilities due to the broadcast nature of weak backscatter signals. Traditional fixed-antenna systems cannot dynamically adapt to device locations, often resulting in suboptimal performance and high susceptibility to eavesdropping.

To address these challenges, this research introduces a novel framework utilizing Pinching Antenna Systems (PASS). By allowing antennas to slide along waveguides, the system can dynamically optimize Line-of-Sight (LoS) links to maximize data rates while maintaining strict communication covertness.

System Model and Methodology

The proposed architecture features a 3D spatial model where a Transmit Pinching Antenna (TPA) and a Receive Pinching Antenna (RPA) move along ceiling-mounted waveguides. This mobility allows the system to "pinch" the wireless link, positioning the TPA to maximize energy transfer to the backscatter device (BD) and the RPA to optimize signal reception.

Figure 2: System model of the PASS-assisted covert backscatter communication system, illustrating the 3D spatial relationship between the Access Point (AP), pinching antennas (TPA/RPA), backscatter device (BD), and an eavesdropper (Eve).

Robust Covertness and Optimization

A critical component of this framework is the Robust Covertness Model. Unlike standard models that assume perfect environmental knowledge, this approach accounts for uncertainty in the eavesdropper's (Eve's) location and background noise. The objective is to maximize the uplink rate ($R_b$) while ensuring that Eve's detection error probability (DEP) remains high (near 0.5), effectively rendering the transmission indistinguishable from noise.

The authors developed an Alternating Optimization (AO) algorithm to solve the resulting non-convex problem by decoupling it into two sub-problems:

  1. Transmit Power Optimization: Determining the maximum power that avoids triggering Eve's sensors.
  2. Antenna Position Optimization: Finding the optimal TPA coordinates along the waveguide to boost the BD's harvested energy.

Key Results and Insights

Numerical simulations conducted at 28 GHz (mmWave) demonstrate that the PASS-assisted system significantly outperforms traditional fixed-antenna baselines.

Figure 3: Performance analysis showing the achievable uplink rate ($R_b$) across various parameters including distance, transmit power ($P_0$), and uncertainty ($\epsilon$). The proposed method consistently maintains higher rates than the baseline while satisfying covertness constraints.
  • Spatial Decoupling: Moving the TPA closer to the BD significantly mitigates the double near-far effect, strengthening the reflected signal without necessarily increasing the detection risk at Eve's location.
  • Covertness Trade-off: The framework successfully identifies the "sweet spot" where signal strength is maximized for the intended reader but remains masked by noise for any unauthorized observers.
  • Resilience to Uncertainty: By designing for the worst-case scenario within an uncertainty zone, the system ensures reliable covert communication even in unpredictable real-world deployments.

Conclusion

By integrating movable pinching antennas with a robust optimization framework, this research provides a viable path for high-rate, secure, and low-power IoT communication. Future work will focus on the joint optimization of both transmit and receive antenna positions and extending the model to support multi-user environments in complex industrial or healthcare settings.

Summary updated

Abstract

The emerging pinching antenna (PA) technology enables flexible antenna positioning for creating line-of-sight (LoS) links, thus offering substantial potential to facilitate ambient signal-based backscatter communication (BSC). This paper investigates PA-assisted BSC for enhanced communication and covertness in the presence of a randomly distributed eavesdropper. An optimization problem is formulated to maximize the uplink covert transmission rate by jointly optimizing the transmit power and antenna positions while satisfying both communication reliability and covertness constraints. An alternative optimization (AO)-based framework is proposed to solve this problem. Numerical results demonstrate that the proposed PA-BSC effectively mitigates the double near-far problem, where energy harvesting and backscatter transmission degrade simultaneously due to distance disparities, thereby improving downlink energy harvesting and uplink data transmission while maintaining covertness performance under practical deployment scenarios.
BibTeX
@misc{wang2025uplink,
  author = {Yulei Wang and Yalin Liu and Yaru Fu and Yuanwei Liu},
  title = {{Uplink Rate Maximization for Pinching Antenna- Assisted Covert Backscatter Communication}},
  year = {2025},
  eprint = {2512.10970},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2512.10970},
}
Figure