Ultrafast and Bright Quantum Emitters from the Cavity Coupled Single Perovskite Nanocrystals

Seongmoon Jun, Joonyun Kim, Minho Choi, Byungsu Kim, Jinu Park, Daehan Kim, Byungha Shin, Yong‐Hoon ChoACS 2023

TL;DR

Researchers have successfully integrated a single perovskite nanocrystal into a circular Bragg grating (CBG) to create a high-performance single-photon source. This architecture achieves a 5.4-fold increase in brightness and an ultrafast emission lifetime of less than 100 ps, overcoming long-standing stability and collection efficiency hurdles in quantum optics.

What Problem Does This Paper Address?

Single-photon emitters (SPEs) are the "bits" of quantum technology, essential for quantum computing and secure communication. While perovskite nanocrystals (NCs) are excellent SPE candidates due to their high quantum yield and fast emission, they face two major roadblocks:

  1. Collection Efficiency: NCs emit light in all directions. Without a photonic structure to funnel these photons toward a lens, most of the light is lost, resulting in "dim" sources.
  2. Material Stability: To integrate a single NC into a structure, the solution must be highly diluted. Standard chemical "wrappers" (ligands) used to stabilize these crystals often fall off during dilution, causing the NCs to lose their ability to emit light.

This paper describes the first successful coupling of an individual perovskite NC with a photonic cavity to solve both the "dimness" and the "stability" problems.

Methods

The team employed a two-pronged approach involving novel chemistry and precision nanofabrication:

  • Zwitterionic Ligands: Instead of standard oleylamine/oleic acid ligands, they used lecithin-capped $CsPbBr_3$ nanocrystals. These "zwitterionic" ligands provide much stronger binding, allowing the NCs to remain stable and bright even when diluted to the single-particle level.
  • Circular Bragg Gratings (CBG): Also known as "bullseye" structures, these consist of concentric rings of silicon nitride ($Si_3N_4$) on a silicon substrate. The team used Finite-Difference Time-Domain (FDTD) simulations to optimize the ring dimensions (radius, width, and period) specifically for the 530 nm green emission of the perovskites.
  • Characterization: They used micro-photoluminescence (PL) to measure brightness, time-resolved PL to track emission speed, and the Hanbury-Brown and Twiss (HBT) experiment to confirm that the device was indeed emitting one photon at a time (single-photon purity).

Datasets

As an experimental physics/materials science paper, it does not use traditional machine learning datasets. Instead, the "data" consists of:

  • Structural Data: Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM) images to verify NC size (~10 nm) and CBG dimensions.
  • Optical Measurements: Power-dependent PL spectra, time-decay curves, and second-order correlation ($g^{(2)}$) functions.
  • Simulated Benchmarks: FDTD results used as a baseline to compare experimental far-field radiation patterns and Purcell factors.

Key Insights and Ideas

  • The Stability Breakthrough: The transition to lecithin-capped NCs was the "enabler." Without this chemical stability, the precise physical alignment with the photonic cavity would be impossible because the NCs would degrade before they could be measured.
  • Directionality is Key: The CBG doesn't just make the NC emit more light; it forces the light to emit in a narrow cone (low azimuthal angle). This matches the numerical aperture (NA) of standard objective lenses, which is why the "brightness" seen by the detector jumps so significantly.
  • The Purcell Effect: By placing the NC in a cavity, they triggered the Purcell effect, which essentially "hurries up" the atom's transition. This pushed the emission lifetime down to ~90 ps. In the world of quantum communication, faster emission means higher bit rates.

Key Results

  • Brightness Boost: A 5.4-fold enhancement in average saturated intensity compared to NCs outside the cavity.
  • Speedup: A 1.95-fold increase in the recombination rate (Purcell enhancement), resulting in an ultrafast lifetime of 89.9 ps.
  • Single-Photon Purity: A background-corrected $g^{(2)}(0)$ value of 0.05. (In quantum optics, any value below 0.5 is considered a single-photon source; 0.05 indicates very high purity).
  • Directional Emission: Experimental far-field patterns matched simulations, showing light concentrated toward the normal direction (the "center" of the bullseye).

Limitations and Future Work

  • Random Placement: Currently, the NCs are spin-coated onto the structures, meaning their placement is random. Some land perfectly in the center, while others don't. The authors suggest using "nano-pockets" or nanoscale optical positioning to place NCs deterministically in the future.
  • Background Noise: The silicon nitride ($Si_3N_4$) itself emits a small amount of background light, which slightly reduces the raw single-photon purity.
  • Collection Ceiling: While the 5.4x boost is impressive, the authors note that adding a metal reflector or a distributed Bragg reflector (DBR) underneath the structure could potentially double the collection efficiency again by reflecting downward-traveling photons back up.

Summary updated

Abstract

Perovskite nanocrystals (NCs) have attracted increasing interest for the realization of single-photon emitters, owing to their ease of chemical synthesis, wide spectral tunability, fast recombination rate, scalability, and high quantum yield. However, the integration of a single perovskite NC into a photonic structure is yet to be accomplished. We successfully coupled a highly stable individual zwitterionic ligand-based CsPbBr3 perovskite NC with a circular Bragg grating (CBG). The far-field radiation pattern of the NC inside the CBG exhibits high directionality toward a low azimuthal angle, which is consistent with the simulation results. We observed a 5.4-fold enhancement in brightness due to an increase in collection efficiency. Moreover, we achieved a 1.95-fold increase in the recombination rate. This study offers ultrafast (< 100 ps) single-photon emission and an improved brightness of perovskite NCs, which are critical factors for practical quantum optical applications.
BibTeX
@inproceedings{jun2023ultrafast,
  author = {Seongmoon Jun and Joonyun Kim and Minho Choi and Byungsu Kim and Jinu Park and Daehan Kim and Byungha Shin and Yong‐Hoon Cho},
  title = {{Ultrafast and Bright Quantum Emitters from the Cavity Coupled Single Perovskite Nanocrystals}},
  booktitle = {ACS},
  year = {2023},
}
Figure