Ultra-low-loss optical interconnect enabled by topological unidirectional guided resonance

Haoran Wang, Yi Zuo, Xuefan Yin, Zihao Chen, Zixuan Zhang, Feifan Wang, Yuefeng Hu, Xiaoyu Zhang, Chao PengarXiv 2023 · DOI · arXiv

Abstract

Grating couplers that interconnect photonic chips to off-chip components are of essential importance for various optoelectronics applications. Despite numerous efforts in past decades, existing grating couplers still suffer from poor energy efficiency and thus hinder photonic integration toward a larger scale. Here, we theoretically propose and experimentally demonstrate a method to achieve ultra-low-loss grating coupler by employing topological unidirectional guided resonances (UGRs). Leveraging the unidirectional emitting nature of UGRs, the useless downward radiation is greatly suppressed with no mirror placed on the bottom. By engineering the dispersion and apodizing the geometry of grating, we realize a grating coupler on 340 nm silicon-on-insulator platform with a record-low-loss of 0.34 dB and bandwidth exceeding 30 nm at the telecom wavelength of 1550 nm. We further show a pair of grating couplers works as optic via that interconnects two stacked photonic chips with a loss of only 0.94 dB. Our work sheds light on the feasibility of energy-efficient optical interconnect for silicon photonics, and paving the way to large-scale photonic integration for applications from optical communication to photonic computing.

Introduction

In the field of silicon photonics, the efficient transfer of light between on-chip waveguides and off-chip components remains a critical bottleneck. Grating couplers serve as the primary "optical I/O" for photonic chips due to their compact footprint and flexible placement. However, conventional grating designs are limited by an inherent physical symmetry that causes them to radiate light both upward toward the fiber and downward into the substrate. This downward leakage typically results in a minimum intrinsic loss of approximately 3 dB (50% power loss), significantly limiting the scalability of photonic systems-on-chip (SoC) that require high-bandwidth, energy-efficient data transfer.

While previous attempts to mitigate this loss have utilized bottom mirrors or complex multi-layer structures, these additions often complicate the manufacturing process and deviate from standard CMOS-compatible flows. This research introduces a novel approach using topological physics to achieve near-perfect unidirectionality without the need for external mirrors.

Topological Design and Methodology

The researchers leveraged the concept of Topological Unidirectional Guided Resonances (UGRs) to solve the leakage problem. The design process follows a sophisticated topological engineering workflow:

  1. Symmetry Breaking: The design begins with a symmetry-protected Bound state In the Continuum (BIC). In momentum space, this BIC carries an integer topological charge. By introducing an asymmetric "L-shaped" geometry—consisting of two blocks of varying depths within a single unit cell—the researchers break the $C_2$ symmetry of the system.
  2. Charge Manipulation: Breaking the symmetry causes the integer topological charge to split into two half-charges. By precisely tuning the grating's geometric parameters, these half-charges can be manipulated to merge on one side of the grating (e.g., the downward radiation channel) while remaining separated on the other. This configuration effectively "forbids" radiation in the downward direction, creating a naturally unidirectional emitter.
  3. Apodization: To maximize coupling efficiency with standard single-mode fibers, the grating geometry is "apodized." By gradually varying the dimensions along the length of the coupler, the radiation pattern is shaped to match the Gaussian profile of the fiber mode, minimizing back-scattering and mode mismatch.

Experimental Results

The devices were fabricated on a standard 340 nm Silicon-on-Insulator (SOI) platform using electron-beam lithography and dry etching. The experimental results set new benchmarks for the industry:

  • Record Efficiency: The chip-to-fiber coupling achieved a record-low insertion loss of 0.34 dB (92.47% efficiency) at the 1550 nm telecom wavelength.
  • Bandwidth: The device maintained high performance over a broad spectrum, with a 1 dB bandwidth exceeding 30 nm.
  • Robustness: To ensure the design was practical for manufacturing, the researchers performed a statistical analysis of 36 identical devices. The average loss was measured at 0.426 dB with a remarkably low variance of 0.005 dB, demonstrating that the topological nature of the UGR provides significant protection against minor fabrication tolerances.

3D Optical Interconnects

One of the most promising applications of this technology is the creation of "optical vias" for 3D photonic integration. Because the UGR couplers are highly unidirectional, they are ideal for stacking chips. In a demonstration of chip-to-chip interconnects, a pair of these couplers achieved a transfer loss of only 0.94 dB (80.53% efficiency). This capability allows for the vertical integration of multiple photonic layers, a key requirement for future high-density photonic computing and data center architectures.

Conclusion and Future Outlook

By applying topological principles to traditional photonic components, this work overcomes a long-standing efficiency barrier in silicon photonics. The achievement of 0.34 dB loss without complex back-mirrors represents a significant step toward energy-efficient, large-scale photonic integration.

Future research may expand this topological approach to other material systems, such as Lithium Niobate on Insulator (LNOI), or focus on developing polarization-independent designs. Ultimately, these ultra-low-loss couplers provide a viable path for the next generation of high-capacity optical communications and photonic integrated circuits.

Summary updated

Abstract

Grating couplers that interconnect photonic chips to off-chip components are of essential importance for various optoelectronics applications. Despite numerous efforts in past decades, existing grating couplers still suffer from poor energy efficiency and thus hinder photonic integration toward a larger scale. Here, we theoretically propose and experimentally demonstrate a method to achieve ultra-low-loss grating coupler by employing topological unidirectional guided resonances (UGRs). Leveraging the unidirectional emitting nature of UGRs, the useless downward radiation is greatly suppressed with no mirror placed on the bottom. By engineering the dispersion and apodizing the geometry of grating, we realize a grating coupler on 340 nm silicon-on-insulator platform with a record-low-loss of 0.34 dB and bandwidth exceeding 30 nm at the telecom wavelength of 1550 nm. We further show a pair of grating couplers works as optic via that interconnects two stacked photonic chips with a loss of only 0.94 dB. Our work sheds light on the feasibility of energy-efficient optical interconnect for silicon photonics, and paving the way to large-scale photonic integration for applications from optical communication to photonic computing.
BibTeX
@misc{wang2023ultra,
  author = {Haoran Wang and Yi Zuo and Xuefan Yin and Zihao Chen and Zixuan Zhang and Feifan Wang and Yuefeng Hu and Xiaoyu Zhang and Chao Peng},
  title = {{Ultra-low-loss optical interconnect enabled by topological unidirectional guided resonance}},
  year = {2023},
  eprint = {2306.09027},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2306.09027},
}
Figure