Ultra-high mobility semiconducting epitaxial graphene on silicon carbide

Jian Zhao, Peixun Ji, Yaqi Li, Rui Li, Kaiming Zhang, Hao Tian, Kaichen Yu, Boyue Bian, Luzhen Hao, Xue Xiao, Will Griffin, Noel Dudeck, Ramiro Moro, Lei Ma, Walt A. de Heer

Abstract

Graphene nanoelectronics potential was limited by the lack of an intrinsic bandgap and attempts to tailor a bandgap either by quantum confinement or by chemical functionalization failed to produce a semiconductor with a large enough band gap and a sufficient mobility. It is well known that by evaporating silicon from commercial electronics grade silicon carbide crystals an epitaxial graphene layer forms on the surfaces. The first epigraphene layer to form on the silicon terminated face, known as the buffer layer, is insulating. It is chemically bonded to the SiC and spectroscopic measurements have identified semiconducting signatures on the microscopic domains. However, the bonding to the SiC is disordered and the mobilities are small. Here we demonstrate a quasi-equilibrium annealing method that produces macroscopic atomically flat terraces covered with a well ordered epigraphene buffer layer that has a 0.6 eV bandgap. Room temperature mobilities exceed 5000 cm²/Vs which is much larger than silicon and 20 times larger than the phonon scattering imposed limit of current 2D semiconductors. Critical for nanotechnology, its lattice is aligned with the SiC substrate, it is chemically, mechanically, and thermally robust, and it can be conventionally patterned and seamlessly connected to semimetallic epigraphene making semiconducting epigraphene ideally suited for nanoelectronics.

Introduction

Since its discovery, graphene has been hailed as a potential successor to silicon due to its extreme electron mobility. However, graphene is naturally a "semimetal," meaning it lacks an intrinsic bandgap. Without a bandgap, transistors made of graphene cannot be effectively turned "off," rendering them unsuitable for digital logic applications. Previous attempts to engineer a bandgap—such as cutting graphene into narrow nanoribbons or chemical modification—typically introduced significant disorder, destroying the material's high mobility. This research addresses these limitations by focusing on the "buffer layer" (the first carbon layer on SiC), demonstrating that it can be synthesized as a high-quality, high-mobility semiconductor.

Methods: Quasi-Equilibrium Annealing

The researchers developed a quasi-equilibrium annealing method to grow well-ordered Semiconducting Epigraphene (SEG). Unlike standard growth where silicon evaporates freely, this method uses a "face-to-face" configuration, placing a Si-face "seed" chip against a C-face "source" chip inside a graphite crucible. This technique, known as Confinement-Controlled Sublimation (CCS), utilizes a nearly sealed crucible in a 1-bar Argon atmosphere to maintain a precise 1:1 Silicon-to-Carbon vapor ratio. This controlled environment allows the surface to reorganize slowly into massive, atomically flat terraces over three distinct thermal stages.

Experimental setup and growth stages for SEG synthesis.

Results and Characterization

The resulting SEG exhibits a clear, well-defined intrinsic bandgap of 0.6 eV and record-breaking room-temperature mobilities exceeding 5,000 cm²/Vs. This mobility is three times higher than that of silicon and twenty times higher than other 2D semiconductors like molybdenum disulfide (MoS₂).

Characterization through Scanning Tunneling Microscopy (STM) and Low-Energy Electron Diffraction (LEED) confirms that the SEG is atomically registered with the SiC substrate. Scanning Electron Microscopy (SEM) reveals macroscopic, atomically flat terraces up to 0.5 mm wide, indicating a path toward wafer-scale manufacturing. Furthermore, Scanning Tunneling Spectroscopy (STS) and Raman maps verify the electronic uniformity and the presence of the bandgap across the surface.

Characterization of SEG showing macroscopic terraces, atomic lattice, and the 0.6 eV bandgap.

One of the most significant insights is the material's thermodynamic stability; the SEG-coated SiC facet is more stable than a bare SiC surface. Additionally, SEG can be selectively converted into metallic graphene (Quasi-Free-Standing Graphene) by hydrogen intercalation, allowing for integrated circuits where the semiconductor and the interconnects are part of the same continuous carbon sheet.

Discussion and Future Outlook

While the intrinsic properties of SEG are world-class, practical application in devices faces hurdles. Prototype Field Effect Transistors (FETs) demonstrated an on/off ratio of 10⁴, but their mobility was limited by scattering from dielectric layers and Schottky barriers at metal contacts. Future research must focus on contact engineering and identifying gate dielectrics that do not degrade the SEG's performance. Refining the growth process to ensure uniform, single-crystal SEG across entire wafers remains a critical goal for industrial scaling.

Summary updated

Abstract

Graphene nanoelectronics potential was limited by the lack of an intrinsic bandgap[1] and attempts to tailor a bandgap either by quantum confinement or by chemical functionalization failed to produce a semiconductor with a large enough band gap and a sufficient mobility. It is well known that by evaporating silicon from commercial electronics grade silicon carbide crystals an epitaxial graphene layer forms on the surfaces [2]. The first epigraphene layer to form on the silicon terminated face, known as the buffer layer, is insulating. It is chemically bonded to the SiC and spectroscopic measurements [3] have identified semiconducting signatures on the microscopic domains. However, the bonding to the SiC is disordered and the mobilities are small. Here we demonstrate a quasi-equilibrium annealing method that produces macroscopic atomically flat terraces covered with a well ordered epigraphene buffer layer that has a 0.6 eV bandgap. Room temperature mobilities exceed 5000 cm2/Vs which is much larger than silicon and 20 times larger than the phonon scattering imposed limit of current 2D semiconductors. Critical for nanotechnology, its lattice is aligned with the SiC substrate, it is chemically, mechanically, and thermally robust, and it can be conventionally patterned and seamlessly connected to semimetallic epigraphene making semiconducting epigraphene ideally suited for nanoelectronics.
BibTeX
@inproceedings{zhao2023ultra,
  author = {Jian Zhao and Peixun Ji and Yaqi Li and Rui Li and Kaiming Zhang and Hao Tian and Kaichen Yu and Boyue Bian and Luzhen Hao and Xue Xiao and Will Griffin and Noel Dudeck and Ramiro Moro and Lei Ma and Walt A. de Heer},
  title = {{Ultra-high mobility semiconducting epitaxial graphene on silicon carbide}},
  booktitle = {Research},
  year = {2023},
}
Figure