UAV-Enabled Wireless-Powered Underground Communication Networks: A Novel Time Allocation Approach

Kaiqiang Lin, Yijie Mao, Onel Luis Alcaraz López, Mohamed-Slim Alouini

Abstract

Wireless Underground Sensor Networks (WUSNs) are critical for precision agriculture and infrastructure monitoring but are severely limited by the energy constraints of buried devices. This paper proposes a sustainable solution using an Unmanned Aerial Vehicle (UAV) to facilitate hybrid wireless energy transfer (WET) and wireless information transfer (WIT). By optimizing time allocation across a four-phase operational cycle and utilizing Channel State Information (CSI)-free beamforming techniques like Rotary Antenna Beamforming (RAB), the system achieves significant energy savings and operational resilience in high-attenuation soil environments.

Introduction

Monitoring soil conditions through WUSNs is vital for modern agriculture. However, the extreme signal attenuation caused by soil and the impracticality of replacing batteries in buried sensors present significant challenges. While wireless energy transfer (WET) from above-ground sources can power these sensors, traditional methods often require precise Channel State Information (CSI), which is difficult and energy-intensive to obtain underground. This paper addresses these hurdles by introducing a mobile UAV that acts as both a power source and a data relay, moving closer to sensors to overcome path loss.

System Architecture and Time Allocation

The proposed framework utilizes a four-phase system model involving a terrestrial Hybrid Access Point (HAP), a mobile UAV, and multiple Underground Devices (UDs). The operational cycle is divided into four distinct time blocks:

  1. UAV Charging ($T_{p1}$): The HAP wirelessly charges the UAV.
  2. UD Charging ($T_{p2}$): A "hybrid" WET phase where both the HAP and the UAV transmit energy to the UDs simultaneously.
  3. Data Collection ($T_{p3}$): UDs use harvested energy to transmit data back to the hovering UAV via Time-Division Multiple Access (TDMA).
  4. Data Offloading ($T_{p4}$): The UAV returns to the HAP to upload the collected data.
System model and time allocation frame structure

The researchers formulated a convex optimization problem to determine the optimal duration for each phase, aiming to minimize the UAV's total energy consumption while meeting the data requirements of the underground network.

CSI-Free Beamforming Strategies

A key innovation in this work is the use of CSI-free beamforming schemes, which eliminate the need for complex channel estimation. Among the evaluated methods, Rotary Antenna Beamforming (RAB) proved most effective. In the RAB scheme, the UAV's antenna array mechanically rotates, sweeping energy across the ground to provide quasi-omnidirectional coverage with high gain without requiring precise sensor locations.

Comparison of CSI-free multi-antenna schemes including Rotary Antenna Beamforming (RAB)

Other schemes evaluated include Switching Antennas (SA), All Antennas transmitting Independent Signals (AAIS), and All Antennas transmitting the Same Signal (AASS). RAB's ability to achieve high gain through mechanical rotation offers a practical path to sustainable underground networks.

Performance Evaluation and Results

The system was evaluated using simulations based on the Mineralogy-Based Soil Dielectric Model (MBSDM), accounting for real-world variables like soil moisture and burial depth. Key findings include:

  • Energy Efficiency: The optimized hybrid WET approach reduced UAV energy consumption by 13.43% compared to traditional fixed-source approaches and 5.38% compared to UAV-only charging.
  • Depth Resilience: The system successfully powered sensors buried at depths of up to 1 meter, a scenario where traditional fixed power sources failed due to extreme attenuation.
  • Sustainability: Simulations demonstrated that a UAV could harvest enough energy from a HAP in just 120 seconds to complete a full monitoring cycle for a 64-node network.

Conclusion and Future Work

This study demonstrates that combining hybrid WET with CSI-free beamforming and optimized time allocation provides a robust and energy-efficient solution for WUSNs. Future research will focus on incorporating non-linear energy harvesting models, optimizing 3D UAV trajectories, and exploring the benefits of multi-antenna underground devices to further enhance system performance.

Summary updated

BibTeX
@article{lin2026uav,
  author = {Kaiqiang Lin and Yijie Mao and Onel Luis Alcaraz López and Mohamed-Slim Alouini},
  title = {{UAV-Enabled Wireless-Powered Underground Communication Networks: A Novel Time Allocation Approach}},
  journal = {IEEE Trans. Green Commun. Netw.},
  year = {2026},
  doi = {10.1109/tgcn.2025.3644128},
}
Figure