Tunable coupling of a quantum phononic resonator to a transmon qubit with flip-chip architecture

Xinhui Ruan, Li Li, Gui-Han Liang, Silu Zhao, Jia-heng Wang, Yi-Zhou Bu, Bingjie Chen, Xiaohui Song, He Zhang, Jinzhe Wang, Qianchuan Zhao, Kai Xu, Heng Fan, Yu-xi Liu, Jing Zhang, Zhihui Peng, Zhongcheng Xiang, Dongning Zheng

Abstract

A hybrid system with tunable coupling between phonons and qubits shows great potential for advancing quantum information processing. In this work, we demonstrate strong and tunable coupling between a surface acoustic wave (SAW) resonator and a transmon qubit based on galvanic-contact flip-chip technique. The coupling strength varies from $2\pi\times$7.0 MHz to -$2\pi\times$20.6 MHz, which is extracted from different vacuum Rabi oscillation frequencies. The phonon-induced ac Stark shift of the qubit at different coupling strengths is also shown. Our approach offers a good experimental platform for exploring quantum acoustics and hybrid systems.

Introduction

Circuit Quantum Acoustodynamics (cQAD) explores the interaction between mechanical vibrations (phonons) and superconducting qubits. Phonons are highly attractive for quantum technologies due to their slow propagation speeds and small wavelengths at gigahertz frequencies, making them ideal for compact quantum memories and transducers. However, a significant material mismatch exists: high-performance piezoelectric materials like Lithium Niobate ($LiNbO_3$) are often "noisy" for qubits, while high-coherence qubit substrates like sapphire lack piezoelectricity.

Previous attempts to bridge these materials using flip-chip designs often relied on capacitive air-gap coupling, which can be weak or unstable. This work addresses these challenges by implementing a galvanic-contact flip-chip architecture that provides a high-strength, stable, and tunable link between the phononic and superconducting domains.

Device Architecture and Methods

The researchers utilized a specialized galvanic-contact flip-chip approach to integrate disparate materials. The system consists of two primary components:

  1. The Top Chip: A SAW resonator featuring a Fabry-Perot cavity formed by Bragg mirrors and an Interdigital Transducer (IDT) on a piezoelectric $LiNbO_3$ substrate.
  2. The Base Chip: A transmon qubit and associated control lines fabricated on a high-coherence sapphire substrate.
Figure 1: (a-c) Schematic and cross-section of the flip-chip architecture showing the top chip (SAW resonator) and base substrate (qubit) connected via Indium (In) bumps. (d-e) Micrographs of the SAW resonator and the qubit control circuitry.

These chips are bonded using Indium (In) bumps, which provide direct electrical (galvanic) contact rather than relying on capacitive coupling. To ensure long-term stability and prevent the formation of resistive intermetallics between the aluminum and indium, Niobium was employed as a diffusion barrier.

Central to the device's functionality is a "gmon" tunable coupler—an RF SQUID with adjustable inductance. By varying the external magnetic flux (DC bias), the effective coupling strength ($g_c$) between the qubit and the SAW cavity can be tuned in real-time.

Experimental Results

The primary achievement of this architecture is the demonstration of strong and widely tunable coupling. By adjusting the gmon bias, the coupling strength ($g_c/2\pi$) was successfully tuned across a range from 7.0 MHz to -20.6 MHz, passing through a zero-coupling point.

Figure 3: (a) Qubit frequency vs. gmon bias. (c) Extracted coupling strength $g_c/2\pi$ as a function of bias, showing tunability from positive to negative values. (d) Vacuum Rabi oscillations at four different bias points, confirming coherent energy exchange.

The team observed clear vacuum Rabi oscillations (Figure 3d), which serve as definitive evidence of coherent energy exchange between the qubit and the phononic resonator. From these measurements, the single-phonon lifetime ($T_{1S}$) was determined to be approximately 205 ns, corresponding to a SAW quality factor ($Q_{SAW}$) of roughly 5025 at 10 mK. Additionally, the researchers characterized the phonon-induced AC Stark shift of the qubit, providing a secondary validation of the electro-acoustic coupling strength.

Discussion and Conclusion

This work demonstrates that galvanic-contact flip-chip bonding is a robust method for creating hybrid quantum systems. By separating the qubit and the SAW resonator onto optimized substrates, the authors maintained qubit coherence while leveraging the strong piezoelectricity of $LiNbO_3$. The ability to tune the coupling strength to zero is particularly significant, as it allows for the "turning off" of interactions to protect the qubit from noise when the resonator is not in use.

While the SAW quality factor achieved here is promising, further improvements are needed to match the performance of purely electromagnetic resonators for long-term quantum storage. Future work will focus on refining fabrication to increase the $Q$ factor and scaling the architecture to multi-qubit systems, where phonons can act as a bus for quantum logic operations.

Summary updated

Abstract

A hybrid system with tunable coupling between phonons and qubits shows great potential for advancing quantum information processing. In this work, we demonstrate strong and tunable coupling between a surface acoustic wave (SAW) resonator and a transmon qubit based on galvanic-contact flip-chip technique. The coupling strength varies from $2π\times$7.0 MHz to -$2π\times$20.6 MHz, which is extracted from different vacuum Rabi oscillation frequencies. The phonon-induced ac Stark shift of the qubit at different coupling strengths is also shown. Our approach offers a good experimental platform for exploring quantum acoustics and hybrid systems.
BibTeX
@article{ruan2024tunable,
  author = {Xinhui Ruan and Li Li and Gui-Han Liang and Silu Zhao and Jia-heng Wang and Yi-Zhou Bu and Bingjie Chen and Xiaohui Song and Xiang Li and He Zhang and Jinzhe Wang and Qianchuan Zhao and Kai Xu and Heng Fan and Yu-xi Liu and Jing Zhang and Zhihui Peng and Zhongcheng Xiang and Dongning Zheng},
  title = {{Tunable coupling of a quantum phononic resonator to a transmon qubit with flip-chip architecture}},
  journal = {Applied Physics Letters},
  year = {2024},
  doi = {10.1063/5.0216607},
}
Figure